Share

Creating a Right of Way

Product Documentation
Intermediate
View Original

Use the Create ROW command to create a right of way along an alignment.

Parcels and adjacent alignment must be in the same site. Parcel boundaries are offset a specified distance from the alignment.

Optionally, specify a radius for fillets at intersections with other objects. The following illustration shows a right of way created between parcels 103 and 104 with fillets at intersections with parcel boundaries.

The right of way is like a narrow parcel, but it is not dynamically linked to the alignment. If you move or edit the alignment you must create the right of way again.

When you run the Create ROW command, you are prompted to select one or more parcels. If an alignment is found in the site and along an edge of the selected parcels, a right of way is created in accordance with the supplied parameters.

To create a right of way

  1. Click Home tabCreate Design panelParcel drop-downCreate Right Of Way .At the Command prompt, enter CreateParcelROW.
  2. Select one or more parcels in the drawing and press Enter.
  3. In the Create Right of Way dialog box, specify the offset distance from the alignment to the parcel boundaries.
  4. If you want corner fillets at parcel boundaries along the right of way, select this option. Specify a radius.
  5. If you want corner fillets at intersections with other alignments and rights of way, select this option. Specify a radius.
  6. Click OK.

Ribbon

Home tab Create Design panel Parcel drop-down Create Right Of Way

Menu

Parcels menuCreate ROW

Command Line

CreateParcelROW

Dialog Box

Create Right of Way


Was this information helpful?