Changing the Origin Point on Polyline Subassemblies

The origin point of the polyline is used at the attachment point, or origin point, of the subassembly. The origin point is the point where the subassembly attaches to an assembly baseline, or to another subassembly. You can change this origin point for subassemblies created from polylines using the Modify Origin command.

To change the origin point on a polyline subassembly

1. In the drawing, or in Toolspace, select the polyline subassembly.
2. Click Subassembly tabModify Subassembly panelModify Origin.At the Command prompt, enter SubassemblyModifyHook.
3. In the drawing, click a location on the subassembly where you want to specify the new origin (attachment point).

For more information, see Creating Subassemblies From Polylines.