Setting the Height of the Instrument

2012-03-14

Product Documentation

Intermediate

You can establish the instrument height to use with the Station/Offset Rod or Offset Rod commands by using the Set Height of Instrument command.

Note

For parameter descriptions, see the Quick Reference tab.

To set the instrument height from the Survey Command Window

In Toolspace, on the Survey tab, right-click the network to edit, and click Survey Command Window.
Click Centerline menu Set Height of Instrument.
Enter the instrument height.

Note
The Set Height of Instrument command does not affect the height of the traverse station. It lets you process level data.

To set the instrument height, using the survey command language

In Toolspace, on the Survey tab, right-click the network to edit, and click Survey Command Window.
At the Command line, enter:
HI [elevation]

Command Line Example

BEGIN CL1

NE 1 1000 1000

NE 2 1000 1500

NE 3 1300 1700

END

CL IS CL1

HI 200

! Current HI: 200.000

The height of instrument is set to 200.00.