Share

Offsetting a Figure

Product Documentation
Intermediate
View Original

You can offset an existing figure by a specified distance. A positive value indicates an offset to the right; a negative value indicates an offset to the left.

To offset a figure

  1. In Toolspace, on the Survey tab, right-click a named network Survey Command Window.
  2. At the Command line, enter:

    OFFSET [figure] [distance]

    Note

    Numeric figure names should not start with the number zero. For example, a figure name of 235 is acceptable but 0235 is not.

Command Line Example

NE 30 2000 2000

NE 31 2500 2500

BEGIN EASTERN_AVE

PT 30

PT 31

CRV LENGTH 60.960 91.440

FIG DD 0 91.440

CRV DELTA -121.920 6.096

END

OFFSET EASTERN_AVE 15.240

OFFSET EASTERN_AVE -6.096

The following illustrates the Offset Figure command:


Was this information helpful?