Share

To add stations to a region using the Corridor ribbon tab

Product Documentation
Intermediate
View Original
Note

This method of adding stations by editing the frequency is the method that is typically used to change the regular intervals for a region. To add manual stations to a corridor, it is best to use the Add a Section command on the Modify Corridor Sections panel. This method lets you specify stations on any region and any baseline.

To add stations to a region using the Corridor ribbon tab

  1. In the drawing, click a corridor.
  2. Click Corridor tabModify Region panelEdit Frequency.
  3. Select a region to edit.
  4. In the Frequency To Apply Assemblies dialog box, click . Select the station location in the drawing.
  5. To add a description for the station, click the Description field and enter a description.
  6. Click OK.

To add stations to a region using the Corridor Properties dialog box

  1. In the drawing, click the corridor, and then click Corridor Properties.
  2. In the Corridor Properties dialog box, click the Parameters tab.
  3. Click the Frequency field for the region to which you want to add stations.
  4. In the Frequency To Apply Assemblies dialog box, click . Select the station location in the drawing.
  5. To add a description for the station, click the Description field. Enter the description.
  6. Click OK.

Was this information helpful?