Copying Corridor Regions

Use this command to copy corridor regions along the same baseline.

To copy a corridor region

1. In the drawing, click a corridor.
2. Click Corridor tabModify Region panelCopy Region.
3. In the drawing, select a region to copy.
   Note

   Only valid locations are available for selection. For example, only stations along the current baseline that do not have a corridor region can be selected.

4. Do one of the following:
   • Specify the region start and end stations.
   • Enter F to fill an entire gap area with the copied region. After entering F, you are prompted to specify the region location.
5. Press Enter to end the command.