Issues Resolved
| API |
|---|
| Fixed an issue with the API that resulted in failed update attempts after making changes to connectors or seams. |
| Fixed an issue where assigning a PriceList to an ITM via the API was failing. |
| Fixed an issue when processing item dimensions on selections containing pattern 0. |
| Fixed an API issue that failed to load product information when located in a common directory. |
| Content |
|---|
| Fixed an issue with invalid data on the specifications in the imperial and metric content configuration. |
| Data Output |
|---|
| Fixed an issue with custom data print object descriptions that displayed incorrectly when using the ampersand character. |
| Fixed an issue that caused the Item Service Button Code print object to disappear. |
| Fixed an issue with the SHOWMETHEDIFFS command, which was incorrectly reporting differences between seismic data when seismic rods were set to off. |
| Database |
|---|
| Fixed an issue that was failing to reset the database GUID and ownership information when creating new configurations. |
| Detailing |
|---|
| Fixed an issue with HVAC terminal elevations reporting incorrectly. |
| Fixed an issue with sleeve elevations reporting incorrectly. |
| Fixed an issue with hanger elevations reporting incorrectly when configured as rectangular types. |
| Fixed an issue with the ADDSERVICETYPEBLOCK feature which caused blocks to disappear after editing the hosted part. |
| Estimating |
|---|
| Fixed a design line issue that was failing to fill reducing bends in rise and fall scenarios. |
| Fixed an issue when editing cost tables that caused table units to revert to the previous setting. |
| Interoperability |
|---|
| Fixed an issue where the connector quantity on adjusted straights was not being reported correctly on jobs exported from Revit. |
| Manufacturing |
|---|
| Fixed an issue that prevented installed machines from being renamed. |
| Fixed an issue that caused insulation to be cut for collars when the database option was set to off. |
| Fixed an issue with part stitches positioning incorrectly when cutting holes in straights using any straight type other than 1 Part Straight. |
| Fixed an issue where the end cap was not over-sizing correctly to account for the inside dim insulation lining. |
| Fixed an issue with the Update Dynamic Hole "UDH" command which was incorrectly removing access panel holes. |
| Fixed an issue with dynamic holes which were developing incorrectly when branch parts contained built-in dampers. |
| Fixed an issue with dynamic hole developments on pattern 866 (rectangular straight) which could cause the hole to move incorrectly when using the 2xL straight type setting. |
| Fixed an issue when writing NC files that could lead to poor stability. |
| Fixed an issue when writing NC files that contain accented characters. |
| Pattern |
|---|
| Fixed an issue with pattern 912 which caused the attacher arrow not to show on branch outlets. |
| Fixed an issue with pattern 802 (rectangular cap end) that was incorrectly rotated on straights when not aligned with the X or Y axis. |
| Fixed an issue with pattern 866 that prevented the straight type option for 2xL to be excluded for selection. |
| Fixed an issue with connector carry-over when stretching coupled straights that had no specification assigned. |
| Fixed an issue where Auto Dynamic Holes was not properly updating after adjusting an access panel. |
| Fixed an issue with patterns 215, 217, 218, & 2217 that resulted in oval branches converting to round. |
| Fixed an issue with pattern 22 that could lead to incorrect seam developments. |
| Fixed an issue with pattern 18 resulting in poor stability when configured with invalid geometry. |
| Fixed an issue with patterns 1 & 866 that prevented collars from developing correctly. |
| Fixed an issue with pattern 124 which was misaligned in FABVIEWER. |
| Fixed a graphical issue with insulated round elbows when using the "Outer Insulation Extensions" setting with insulation that is thicker than the outside diameter. |
| Fixed an issue with pattern 818 to remove invalid faces. |
| Fixed an issue with invalid dynamic hole geometry when using lined ductwork. |
| Fixed an issue with pattern 7 (shoe tap fittings) that resulted in incorrect damper hole positions. Edit parts in existing models to apply the fix. |
| Scripting |
|---|
| Fixed a scripting issue with the StructureType property which was incorrectly set to write only. |
| Usability |
|---|
| Fixed an issue that prevented part collections from being renamed. |
| Fixed an issue when closing the application with the NC reader dialog open which resulted in poor stability. |
| Fixed an issue with the job contents view displaying multiple times unexpectedly. |
| Fixed an issue in the "Filter By" widget that caused filters to behave incorrectly. |
| Fixed an issue that resulted in the current directory switching when loading the CADmep object enabler. |
| Fixed an issue that caused utility bar customization to be lost after restarting the application. |
| Fixed an issue with branches and panels being incorrectly rotated when placed on straights that are not aligned with the X or Y axis. |