The following table shows how you should set PartMaker Process Parameter options based on the settings on your Machine Tool's control.
|
Machine Control settings |
PartMaker setting |
|---|---|
|
Nose radius is not entered on the control.
Tool wear is not supported. |
Apply Comp in PartMaker — selected. Nose Radius Compensation — None. |
|
Nose radius is not entered on the control.
Tool wear is entered on the control. |
Apply Comp in PartMaker — selected. Nose Radius Compensation — Left or Right. |
|
Nose radius is entered on the control. |
Apply Comp in PartMaker — deselected. Nose Radius Compensation — Left or Right |