Post Library - Milling, Standard Table
| File Name | Description |
|---|---|
| A-B_8200.PST | Sample Config file for Allen Bradley 8200 control. • Cutter diameter compensation is supported. • Multiple fixture numbers H1,H2... are supported. • Milling Subprograms are supported. • Drilling Subprograms are not supported. • Milling Subprograms can be enabled in ConfigPost's General Info dialog. • Enter the fixture number in the Work Offset field in PartMaker's Faces dialog. |
| ACRA_850.PST | Sample Config file for a Vickers Acramatic 850 control as found on the Arrow mill (and others). • Arc centers are absolute. • Multiple fixture offsets are supported. • Cutter diameter compensation is supported. |
| ACRA_1000.PST | Sample Config file for Acramatic controls 10H, 10HC-1000/1500/2500 ("Big Blue"). • Single quadrant circular interpolation. • Vector type (P,Q) cutter diameter compensation is supported. |
| ACRA_2100.PST | Sample Config file for Vickers Acramatic 2100 control. • Arc centers are absolute. • Multiple fixture offsets are supported. • Cutter diameter compensation is supported. |
| ANILAM.PST | Sample generic Config file for Anilam control on a CNC Mill. |
| ANILAM_1400.PST | Sample Config file for Anilam 1400 control on a mill with an automatic tool changer. • Arc centers are always absolute. • Multiple work offsets are supported. • Uses M6 for tool change command. |
| ANILAM_1400_NO_ATC.PST | Sample Config file for Anilam 1400 control on a mill with a manual tool changer. • Arc centers are always incremental. • Multiple work offsets are supported. • Uses M6 for tool change command. |
| BOSS_4A.PST | Sample Config file for Bridgeport BOSS4,5 controls. • Uses single quadrant circular interpolation with unsigned I,J values. • Cutter diameter compensation is not supported. |
| BOSS_6.PST | Sample Config file for Bridgeport BOSS5,6,7 controls. • Cutter diameter compensation is supported. • 16 Milling Subprograms are supported. • Drilling Subprograms are not supported. • Milling Subprograms can be enabled in ConfigPost's General Info dialog. |
| BOSS_10.PST | Sample Config file for Bridgeport BOSS8,9,10 and new BOSS10 compatible controls. • Cutter diameter compensation is supported. • 99 Milling Subprograms are supported. • Drilling Subprograms are not supported. • Milling Subprograms can be enabled in ConfigPost's General Info dialog. • M3 / M4 and M5 are not output for spindle control. If these codes are required, then use the DX32.PST. |
| CENTROID.PST | Sample Centroid Config file. • Drilling Subprograms are supported. • Milling Subprograms are supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. |
| CONTOUR.PST | Sample Contour Config file. • Drilling Subprograms are supported. • Milling Subprograms are supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. |
| CRUSADER-G.PST | Sample Config file for Anilam Crusader-G mill. • Cutter diameter compensation is supported. |
| CRUDSADER-M.PST | Sample Config file for Anilam Crusader-M mill. • Cutter diameter compensation is supported. |
| DEMO.PST | Functionally the same as Fanuc.pst. Additional comments included to further illustrate how ConfigPost can be used to improve NC program format. |
| DX32.PST | Sample Config file for Bridgeport DX32 and new BOSS10 compatible controls that require M3 / M4 and M5 to activate the spindle. • Cutter diameter compensation is supported. • 99 Milling Subprograms are supported. • Drilling Subprograms are not supported. • Milling Subprograms can be enabled in ConfigPost's General Info dialog. |
| DYNACONV.PST | Sample Dynapath 10/20/30 Config file in CONVERSATIONAL mode. • Drilling Subprograms are not supported. • Milling Subprograms are not supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. • Each line must begin with an event (1) and end with a $. |
| DYNAPATH_CONV.PST | Sample Dynapath 20/30 Config file for CONVERSATIONAL (G-code) programming with 2-digit tool numbers: • Cutter diameter compensation is supported. • Multiple Work Offsets are supported. • Drilling Subprograms are not supported. • Milling Subprograms are not supported. |
| DYNAPATH_EIA_2.PST | Sample Dynapath 20/30 Config file for EIA (G-code) programming with 2 digit tool numbers. • Cutter diameter compensation is supported. • Multiple Work Offsets are supported. • Drilling Subprograms are not supported. • Milling Subprograms are not supported. |
| DYNAPATH_EIA_4.PST | Sample Dynapath 20/30 Config file for EIA (G-code) programming with 4 digit tool numbers. • Cutter diameter compensation is supported. • Multiple Work Offsets are supported. • Drilling Subprograms are not supported. • Milling Subprograms are not supported. |
| EZPATH.PST | Sample EZ Path Config file. • Drilling Subprograms are not supported. • Milling Subprograms are not supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. |
| FADAL.PST | Sample Config file for FADAL controls. • Cutter diameter compensation is supported. • Multiple work offset coordinate systems are supported. |
| FADAL_ROTARY_A.PST | Sample Config file for FADAL controls with programmable A rotary axis. • Cutter diameter compensation is supported. • Fixture offsets E1 - E99 supported. |
| FADAL-E.PST | Sample Config file for FADAL controls. • Cutter diameter compensation is supported. • Multiple fixture numbers E1,E2... are supported. • Fanuc style Milling and Drilling Subprograms are supported. • Milling and Drilling Subprograms can be enabled in ConfigPost's General |
| FADAL_400.PST | Sample Config file for FADAL controls. • Cutter diameter compensation is supported. • Fanuc style Milling and Drilling Subprograms are supported. • Milling and Drilling Subprograms can be enabled in ConfigPost's General Info dialog. • You should enter the fixture number in PartMaker Faces dialog in the Work Offset field. |
| FAGOR.PST | Sample Config file for Fagor 80XX series control. • Multiple Work Offsets are supported. • Drilling subprograms are supported. • Milling subprograms are supported. • Cutter diameter compensation is supported. • Tool changes are assumed to be with an automatic changer, using the Taa.bb format, where aa is the tool number and bb is the offset number. |
| FAGOR_NO_ATC.PST | Sample Config file for Fagor 80XX series control. • Multiple Work Offsets are supported. • Drilling subprograms are supported. • Milling subprograms are supported. • Cutter diameter compensation is supported. • Tool changes are assumed to be with a manual changer, using the T.aa format where aa is the tool offset to be applied. |
| FANUC_6.PST | Sample Config file for Fanuc 6 type controls. • Cutter diameter compensation is supported. • Uses M6 for tool change. • Multiple work offsets (G54,G55,..) are supported. • Milling and Drilling Subprograms are supported. • Milling and Drilling Subprograms can be enabled in ConfigPost's General Info dialog. |
| FANUC_10.PST | Sample Config file for Fanuc 10 type controls. • Cutter diameter compensation is supported. • Uses M6 for tool change. • Multiple work offsets (G54,G55,..) are supported. • Milling and Drilling Subprograms are supported. • Milling and Drilling Subprograms can be enabled in ConfigPost's General Info dialog. |
| FANUC_11.PST | Sample Config file for Fanuc 11 type controls. • Cutter diameter compensation is supported. • Uses M6 for tool change. • Multiple work offsets (G54,G55,..) are supported. • Milling and Drilling Subprograms are supported. • Milling and Drilling Subprograms can be enabled in ConfigPost's General Info dialog. |
| FANUC_15.PST | Sample Config file for Fanuc 15 type controls. • Cutter diameter compensation is supported. • Uses M6 for tool change. • Multiple work offsets (G54,G55,..) are supported. • Milling and Drilling Subprograms are supported. • Milling and Drilling Subprograms can be enabled in ConfigPost's General Info dialog. |
| FANUC_WITHOUT_ M6.PST | Sample Config file for Fanuc type controls without M6. Tool changes are executed solely on a T call. Typically used with machines that have no Automatic Tool Changer. • Cutter diameter compensation is supported. • Multiple work offsets (G54,G55,..) are supported. • Milling and Drilling Subprograms are supported. • Milling and Drilling Subprograms can be enabled in ConfigPost's General Info dialog. |
| FANUC_ROTARY_ A.PST | Sample Config file for Fanuc control with rotary A axis. • Drilling subprograms are supported. • Milling subprograms are supported. • Multiple Work Offsets are supported. • Cutter Diameter compensation is supported. |
| FANUC_O.PST | Sample Config file for the Fanuc O series control. • Drilling subprograms are supported. • Milling subprograms are supported. • Multiple Work Offsets are supported. • Cutter Diameter compensation is supported. |
| FANUC_16I.PST | Sample Config file for the Fanuc 16 / 16i series control. • Drilling subprograms are supported. • Milling subprograms are supported. • Multiple Work Offsets are supported. • Cutter Diameter compensation is supported. |
| FANUC_18I.PST | Sample Config file for the Fanuc 18 / 18i series control. • Drilling subprograms are supported. • Milling subprograms are supported. • Multiple Work Offsets are supported. • Cutter Diameter compensation is supported. |
| FANUC_160.PST | Sample Config file for the Fanuc 160 series control. • Drilling subprograms are supported. • Milling subprograms are supported. • Multiple Work Offsets are supported. • Cutter Diameter compensation is supported. |
| FANUC_180.PST | Sample Config file for the Fanuc 180 series control. • Drilling subprograms are supported. • Milling subprograms are supported. • Multiple Work Offsets are supported. • Cutter Diameter compensation is supported. |
| FANUC_20i.PST | Sample Config file for the Fanuc 20 / 20i series control. • Drilling subprograms are supported. • Milling subprograms are supported. • Multiple Work Offsets are supported. • Cutter Diameter compensation is supported. |
| FANUC_21i.PST | Sample Config file for the Fanuc 21 / 21i series control. • Drilling subprograms are supported. • Milling subprograms are supported. • Multiple Work Offsets are supported. • Cutter Diameter compensation is supported. |
| FANUC_30i.PST | Sample Config file for the Fanuc 30 / 30i series control. • Drilling subprograms are supported. • Milling subprograms are supported. • Multiple Work Offsets are supported. • Cutter Diameter compensation is supported. |
| FANUC_31i.PST | Sample Config file for the Fanuc 31 / 31i series control. • Drilling subprograms are supported. • Milling subprograms are supported. • Multiple Work Offsets are supported. • Cutter Diameter compensation is supported. |
| FANUC_32i.PST | Sample Config file for the Fanuc 32 / 32i series control. • Drilling subprograms are supported. • Milling subprograms are supported. • Multiple Work Offsets are supported. • Cutter Diameter compensation is supported. |
| GE1050_IJ.PST | Sample Config file for GE 1050 controls. • Uses unsigned I,J values for circular interpolation. |
| G&L_NUM_800.PST | Sample Config file for Giddings and Lewis Numeric 800. |
| G&L_NUM_800M.PST | Sample Giddings and Lewis Config file. • Drilling Subprograms are not supported. • Milling Subprograms are not supported. • Multiple Work Offsets are not supported. • Cutter diameter compensation is supported. |
| HAAS_VMC.PST | Sample Config file for HAAS controls as implemented on VMCs. • Cutter diameter compensation is supported. • Uses M6 for tool change. • Multiple work offsets (G54, G55,..) are supported. • Fanuc style Milling and Drilling Subprograms are supported. • Milling and Drilling Subprograms can be enabled in ConfigPost's General Info dialog. |
| HH_CONV.PST | Sample Config file for Heidenhain conversational control. • Cutter diameter compensation is supported. • Milling Subprograms are supported. • Drilling Subprograms are not supported. • Milling Subprograms can be enabled in ConfigPost's General Info dialog. |
| HITACHI_SEIKI.PST | Sample Hitachi Seiki Config file. • Drilling Subprograms are supported. • Milling Subprograms are supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. |
| HURCO_ULTIMAX.PST | Sample Hurco Ultimax II or Ultimax III Config file. • Cutter Diameter compensation is supported. • Drilling Subprograms are not supported. • Milling Subprograms are not supported. |
| HARDINGE_VMC_FANUC.PST | Sample Config File for Hardinge VMC with Fanuc control. |
| HARDINGE_VMC_SIEMENS.PST | Sample Config File for Hardinge VMC with Siemens control. |
| LEBLOND.PST | Sample Config File for Leblond Makino. |
| MAZAK.PST | Sample Config file for MAZAK controls. • Cutter diameter compensation is supported. • Uses M6 for tool change. • Tools preloading is not supported. • Multiple work offsets (G54,G55,..) are supported. • Milling Subprograms are supported. • Drilling Subprograms are not supported. • Milling Subprograms can be enabled in ConfigPost's General Info dialog. |
| MAZAK_FUSION.PST | Sample Config file for MAZAK FUSION controls. • Cutter diameter compensation is supported. • Uses M6 for tool change. • Tools preloading is supported. • Multiple work offsets (G54,G55,..) are supported. • Milling Subprograms are supported. • Drilling Subprograms are not supported. • Milling Subprograms can be enabled in ConfigPost's General Info dialog. |
| MAZAK_MATRIX.PST | Sample Config file for MAZAK MATRIX controls. • Cutter diameter compensation is supported. • Uses M6 for tool change. • Tools preloading is supported. • Multiple work offsets (G54,G55,..) are supported. • Milling Subprograms are supported. • Drilling Subprograms are not supported. • Milling Subprograms can be enabled in ConfigPost's General Info dialog. |
| MELDAS.PST | Sample Config file for Mitsubishi MELDAS control. • Cutter compensation is supported. • Multiple work offsets are supported. • Tools are changed with a M6 command. • Drilling Subprograms are supported. • Milling Subprograms are supported. |
| MELDAS_NO_ATC.PST | Sample Config file for Mitsubishi MELDAS control for use with machines without automatic tool changer. Tool changes are assumed to be by hand. • T-Codes are not used. Appropriate tool is determined by the H-code used in the G43 line associated with the tool changing process. • Cutter compensation is supported. • Multiple work offsets are supported • Drilling Subprograms are supported. |
| MITSUI_SEIKI.PST | Sample Mitsui Seiki Config file. • Drilling Subprograms are supported. • Milling Subprograms are supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. |
| MIYANO_VMC.PST | Sample Miyano VMC Config file. • Drilling Subprograms are supported. • Milling Subprograms are supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. |
| OKADA.PST | Sample Okada Config file. • Drilling Subprograms are not supported. • Milling Subprograms are not supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. |
| OKK.PST | Sample Config file for OKK Machining Centers. |
| OSP_5000_VMC.PST | Sample Config file for OKUMA 5000 series controls. • Cutter diameter compensation is supported. • Single fixture number G15H1 is supported. • Milling Subprograms are supported. • Drilling Subprograms are not supported. • Milling Subprograms can be enabled in ConfigPost's General Info dialog. |
| OSP_7000_VMC.PST | Sample Config file for OKUMA 7000 series controls. • Cutter diameter compensation is supported. • Single fixture number G15H1 is supported. • Milling Subprograms are supported. • Drilling Subprograms are not supported. • Milling Subprograms can be enabled in ConfigPost's General Info dialog. |
| OSP_5000_HMC.PST | Sample Config file for OKUMA 5000 series controls on horizontal machining centers. • Cutter diameter compensation is supported. • Multiple fixture numbers G15 H1,G15 H2... are supported. • Milling Subprograms are supported. • Drilling Subprograms are not supported. • Milling Subprograms can be enabled in ConfigPost's General Info dialog. |
| OSP_7000_HMC.PST | Sample Config file for OKUMA 5000 series controls on Horizontal Mills. • Cutter diameter compensation is supported. • Multiple fixture numbers G15 H1,G15 H2... are supported. • You should enter the fixture number in PartMaker Faces Dialog in the Work Offset field. • Milling Subprograms are supported. • Drilling Subprograms are not supported. • Milling Subprograms can be enabled in ConfigPost's General Info dialog. |
| PROT_MX3.PST | Sample Config file for ProtoTrack-MX3 controls. • Cutter diameter compensation is supported. • Uses M6 for tool change. • Fully Fanuc compatible. |
| PROT_PLUS.PST | Sample Config file for ProtoTrack-PLUS controls. • Cutter diameter compensation is supported. • Not fully Fanuc compatible because it uses ";" at the end of each line. • Milling Subprograms are supported. |
| QUICK.PST | Sample Config file for QUICKMILL (Canadian). • Cutter diameter compensation is supported. • Multiple work offsets are supported. • Drilling Subprograms are supported. • Milling Subprograms are supported. |
| RAMPING.PST | Sample Ramping Config file. • Drilling Subprograms are not supported. • Milling Subprograms are not supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. |
| ROBO_DRILL.PST | Sample Robo_Drill Config file. • Drilling Subprograms are supported. • Milling Subprograms are supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. |
| SIEMENS_810.PST | Sample Siemens Config file. • Drilling Subprograms are supported. • Milling Subprograms are supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. |
| SIEMENS_820.PST | Sample Siemens Config file. • Drilling Subprograms are supported. • Milling Subprograms are supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. |
| SIEMENS_840.PST | Sample Siemens Config file. • Drilling Subprograms are supported. • Milling Subprograms are supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. |
| SUPERMAX.PST | Sample Config file for Supermax CNC Mill. |
| TAKSAWA.PST | Sample Taksawa Config file. • Drilling Subprograms are not supported. • Milling Subprograms are not supported. • Multiple Work Offsets are supported. • Cutter diameter compensation is supported. |
| TECHNO.PST | Sample Config file for TECHNO mill, which is basically a subset of the standard FANUC control language. • Cutter compensation is not supported. • Milling subprograms are not supported. • Drilling subprograms are not supported. |
| TOSNUC.PST | Sample Config file for Toshiba CNC Mill. |
| TREE.PST | Sample Config file for Tree CNC Mill. |
| YANG.PST | Sample Yang Config file. • Drilling Subprograms are not supported. • Milling Subprograms are not supported. • Multiple Work Offsets are supported. |