New mappings allow you to use the new curves in MasterGrade with your Tangent Panel.

The new MasterGrade curves have been mapped to the Tangent Arc, Element, and Wave panels.

• The mappings are available in MasterGrade.
• The selected curve is shown as a highlight on the panel.
• If you press the RGB Curves RGB, Red, Green, or Blue button, the RGB Curve is selected.

Tangent Arc

Navigation module

• Use the button to move the selected points on the curve:
  • Point < (Decrease X value)
  • Point > (Increase X value)
  • Point + (Increase Y value)
  • Point - (Decrease Y value)
• Bypass Curve (Current / All Curves)
  • Byp Crv = Bypass Current Curve: Top Button bank (bank 3 button 2)
  • Byp Crvs = Bypass All Curves: Top Button bank (ALT bank 3 button 2)
• Reset Curve (Current / All Curves)
  • Reset Crv = Reset Current Curve: Top Button bank(bank 3 button 3)
  • Reset Crvs = Reset All Curves: Top Button bank (ALT bank 3 button 3)

Function module

• Curves |> (Cycle Curve): Press to cycle the curves.

• A label on the right side shows the name of the currently selected curve.

• Home button is now next to Del Point (second button bank).

• Curve Points navigation knobs

  • <|Point|>

    Navigate points on the current Curve

• Reset an individual point or a selection of points on the current Curve:

  Reset Point: Center button bank, second line, rightmost button.

Grading module

• Use the top knobs to select the current curve (press the knob). Rotation knob does nothing.
  • Bank 1
    • RGB
  • Bank 2
    • Hue | Hue (ALT: Hue curve)
    • Hue | Sat
    • Hue | Lum
  • Bank 3
    • Lum | Sat
    • Lum | Lum
    • Sat | Sat (ALT: Sat | Lum)

Curve Points navigation Trackball

• <|Point|>

  Navigate points on the current Curve using the ring of the third Trackball (ALT: Precise mode)

Tangent Element

KB module

• Use the knobs to select the current curve (press the knob). Rotation knob does nothing.

  • RGB
  • Hue | Hue (ALT: Hue curve)
  • Hue | Sat
  • Hue | Lum
  • Lum | Sat
  • Lum | Lum
  • Sat | Sat (ALT: Sat | Lum)

• Previous and Next Point navigation buttons are available.

• Curve Points navigation knobs

  • <|Point|>

  Navigate points on the current Curve

MF module

• Curves |> (Cycle Curve): Press to cycle the curves. A label on the right side shows the name of the currently selected curve.

• Home button is now next to Del Point (second button bank).

• Added missing Del Point in ALT mode.

• Reset Sel (ALT mode: / Reset Al) buttons have been added.

• Use the button to move the currently selected points of the Curve (IM Curves page 1 & IM Sel|Curves page 2

  • Point < (Decrease X value)
  • Point > (Increase X value)
  • Point + (Increase Y value)
  • Point - (Decrease Y value)

• Bypass Curve (Current / All Curves)

  • Byp Crv = Bypass Current Curve: Left button (2nd row)
  • Byp Crvs = Bypass All Curves: (ALT Left button (2nd row)

• Reset Curve (Current / All Curves)

  • Reset Crv = Reset Current Curve: Middle button (2nd row)
  • Reset Crvs = Reset All Curves: ALT Middle button (2nd row)

• Reset an individual point or a selection of points on the current Curve:

  Reset Point (ALT of Del Point)

TK module

• Curve Points navigation Trackball
  • <|Point|> Navigate points on the current Curve using the ring of the third Trackball (ALT: Precise mode)

Tangent Wave

Use the knobs to select the current curve (press the knob). Knob does nothing.

• RGB
• PositionX
• PositionY
• Hue | Hue (ALT: Hue curve)
• Hue | Sat
• Hue | Lum
• Lum | Sat
• Lum | Lum
• Sat | Sat (ALT: Sat | Lum)

The buttons allow navigating between points, add, and remove point:

• <| Point (ALT = Add Point)
• Point |< (ALT = Del Point)

Curve Points navigation knobs

• <|Point|>

  Navigate points on the current Curve

Curve Points navigation Trackball

• <|Point|>

  Navigate points on the current Curve using the ring of the third Trackball (ALT: Precise mode)