Broadcast Monitor Preferences

Incoming Sync

Incoming Sync

Displays the timing of the sync received by the workstation. Non-editable.

Broadcast Monitor

Broadcast Monitor option

Select the output device used by the broadcast monitor, or turn it off.

Broadcast Stereo

Broadcast Stereo option

Select the stereoscopic display option. The options are Dual Output, Interlaced, and Anaglyph.

Interlaced option

Select if the Left Eye frame is on Field 1 or Field 2 when the Broadcast Stereo option is set to Interlaced.

Anaglyph option

Select the display option when the Broadcast Stereo option is set to Anaglyph.

AJA HDMI HDR

These options are only available when using AJA output devices.

AJA HDMI HDR

Sets HDR monitoring options for AJA HDMI output. For SDR, set to NONE. If set to CUSTOM, the configuration is in an XML file. A sample file is at: /optAutodesk/flame_[version]/cfg/AjaHdmiHdrFileSample.xml. To use it, use setenv DL_AJA_HDMI_HDR_CUSTOM_FILE [path to file] and run the application.

AJA SDI HDR

Use these options to tell the broadcast monitor what type of signal to expect. These options are only available when using AJA output devices.

SDI Colorimetry option

Sets the broadcast monitor colorimetry parameter.

SDI Transfer Function option

Sets the broadcast monitor transfer function parameter.

SDI Luminance option

Sets the broadcast monitor luminance parameter.

SDI RGB Range option

Sets the broadcast monitor RGB range parameter.

Broadcast Colour Space

Use these options to set the colour space of the signal sent to the broadcast monitor.

Broadcast Colour Space option

Set the broadcast colour space.

Colour Space option

Set the broadcast colour space options: Legal range or Full range.

Broadcast Timing

Broadcast Timing option

Select the timing rate options for the broadcast monitor.

Lock Timing

Lock the timing rate.