Release Notes for Autodesk InfraWorks 2022
Fixed Issues
Autodesk InfraWorks 2022.1 Hotfix 11 (January 2025 release)
| Security |
| This hotfix contains security updates for Autodesk InfraWorks. Learn More. |
| Decoration |
| Fixed an issue that caused InfraWorks to freeze when attempting to duplicate a decoration. |
| Miscellaneous |
| Fixed an issue that caused InfraWorks to crash when importing corrupt COLLADA animation files. |
Autodesk InfraWorks 2022.1 Hotfix 10 (September 2024 release)
| Security |
| This hotfix contains security updates for Autodesk InfraWorks. Learn More. |
Autodesk InfraWorks 2022.1 Hotfix 9 (May 2024 release)
| Security |
| This hotfix contains security updates for Autodesk InfraWorks. Learn More. |
Autodesk Infrastructure Parts Editor 2022.0.6 Hotfix (May 2024 release)
| Security |
| This hotfix contains security updates for Autodesk Infrastructure Parts Editor. Learn more. |
Autodesk InfraWorks 2022.1 Hotfix 8 (January 2024 release)
| Publishing |
| Fixed an issue when synchronizing and publishing InfraWorks files. |
| Security |
| This hotfix contains security updates for Autodesk InfraWorks. Learn More. |
| Watershed Analysis |
| Watershed analysis now runs locally and does not require the the Watershed analysis service. |
Autodesk Infrastructure Parts Editor 2022.0.5 Hotfix (December 2023 release)
| Security |
| This hotfix contains security updates for Autodesk Infrastructure Parts Editor. Learn more. |
Autodesk Infrastructure Parts Editor 2022.0.4 (August 2023 release)
| Security |
| This hotfix contains security updates for Autodesk Infrastructure Parts Editor. Learn more. |
Autodesk InfraWorks 2022.1 Hotfix 7 (June 2023 release)
| Security |
| This hotfix contains security updates for Autodesk InfraWorks. Learn More. |
Autodesk Infrastructure Parts Editor 2022.0.3 (November 2022 release)
| Security |
| This hotfix contains security updates for Autodesk Infrastructure Parts Editor. Learn more. |
Autodesk InfraWorks 2022.1 Hotfix 6 (September 2022 release)
This hotfix is a complete InfraWorks installation that requires earlier versions of InfraWorks 2020 to be uninstalled.
| Security |
| This hotfix contains security updates for Autodesk InfraWorks. Learn more here and here. |
Autodesk Infrastructure Parts Editor 2022.0.2 (August 2022 release)
| Security |
| This hotfix contains security updates for Autodesk Infrastructure Parts Editor. Learn more. |
Autodesk InfraWorks 2022.1 Hotfix 5 (June 2022 release)
This hotfix is a complete InfraWorks installation that requires earlier versions of InfraWorks 2022 to be uninstalled.
| Cloud Services |
| Implemented job limitations for optimization. |
| The legacy interface for cloud credits was deprecated. |
| Implemented token translation. |
| Security |
| This hotfix contains security updates for Minimal Git for Windows. Learn More |
Autodesk InfraWorks 2022.1 Hotfix 4 (March 2022 release)
This hotfix is a complete InfraWorks installation that requires earlier versions of InfraWorks 2022 to be uninstalled.
| Security |
| This hotfix contains security updates for Minimal Git for Windows. Learn More |
Autodesk InfraWorks 2022.1 Hotfix 3 (January 2022 release)
This hotfix requires InfraWorks 2022.1 to be installed in order to apply the update. Be sure your installation has all of its previous updates before installing this hotfix. Refer to manage.autodesk.com to view what previous updates are available.
2022.1 Hotfix 3 contains an essential security update. It is highly recommended for customers using InfraWorks 2022.1 in a version below 22.1.3.59.
| Security |
| This hotfix contains security updates for Traffic Simulation. Learn More. |
Autodesk InfraWorks 2022.1 Hotfix 2 (January 2022 release)
This hotfix requires InfraWorks 2022.1 to be installed in order to apply the update. Be sure your installation has all of its previous updates before installing this hotfix. Refer to manage.autodesk.com to view what previous updates are available.
| Security |
| This hotfix contains security updates for Autodesk InfraWorks. Learn More. |
| Collaboration |
There are changes in 2022 that impact the way InfraWorks communicates with cloud services. This hotfix adds stability changes to ensure that InfraWorks 2022.1 continues to work with the following:- Import and Update of Bing Raster Datasources
- Bridge Analysis
- Watershed Analysis
- Optimization
- Shared Views
|
| General |
| Updated the Commons IO Java package to 2.11.0. As a minimum requirement, InfraWorks now needs Java 8 installed. |
Autodesk InfraWorks 2022.1 Hotfix 1 (October 2021 release)
This hotfix requires InfraWorks 2022.1 to be installed in order to apply the update. Be sure your installation has all of its previous updates before installing this hotfix. Refer to manage.autodesk.com to view what previous updates are available.
| Security |
| This hotfix contains security updates for Autodesk InfraWorks. |
| Coordinate Systems |
| Fixed an issue in which a coordinate system boundary check would return errors at import or export. During the coordinate system boundary check, its extent is buffered to allow cross coordinate system boundary models to be exported. |
| Model Builder |
| Fixed an issue in which a search option was not visible in the drop down when an address was partially entered in the search field. |
Autodesk InfraWorks 2022.0 Hotfix 4 (January 2022 release)
This hotfix requires InfraWorks 2022.0 to be installed in order to apply the update. Be sure your installation has all of its previous updates before installing this hotfix. Refer to manage.autodesk.com to view what previous updates are available.
2022.0 Hotfix 4 contains an essential security update. It is highly recommended for customers using InfraWorks 2022.0 in a version below 22.0.4.166.
| Security |
| This hotfix contains security updates for Traffic Simulation. Learn More. |
Autodesk InfraWorks 2022.0 Hotfix 3 (January 2022 release)
This hotfix requires InfraWorks 2022.0 to be installed in order to apply the update. Be sure your installation has all of its previous updates before installing this hotfix. Refer to manage.autodesk.com to view what previous updates are available.
| Security |
| This hotfix contains security updates for Autodesk InfraWorks. Learn More. |
| Collaboration |
There are scheduled changes in 2022 that impact the way InfraWorks communicates with cloud services. This hotfix adds stability changes to ensure that InfraWorks 2022.0 continues to work with the following:- Import and Update of Bing Raster Datasources
- Bridge Analysis
- Watershed Analysis
- Optimization
- Shared Views
|
| General |
| Updated the Commons IO Java package to 2.11.0. As a minimum requirement, InfraWorks now needs Java 8 installed. |
Autodesk InfraWorks 2022.0 Hotfix 2 (October 2021 release)
This hotfix requires InfraWorks 2022.0.1 Hotfix to be installed in order to apply the update. Be sure your installation has all of its previous updates before installing this hotfix. Refer to manage.autodesk.com to view what previous updates are available.
| Security |
| This hotfix contains security updates for Autodesk InfraWorks. |
| Added a confirmation dialog that warns when importing data with configurations based on custom javascript. |
| Coordinate Systems |
| Fixed an issue in which a coordinate system boundary check would return errors at import or export. During the coordinate system boundary check, its extent is buffered to allow cross coordinate system boundary models to be exported. |
Autodesk Infrastructure Parts Editor 2022.0.1 (October 2021 release)
| Security |
| This hotfix contains security updates for Autodesk Infrastructure Parts Editor. Learn more. |
Autodesk InfraWorks 2022.1 (September 2021 release)
| General |
| Improved performance in a variety of workflows, such as bridge creation and parametric dimension recall. |
| Fixed an issue in which selected areas under 200 sq. km incorrectly resulted in an error message warning the selection exceeded that area. |
| Improved handling for Dual Monitor setup with 4k screens for dockable panels. Dockable panels, such as Model Explorer or Style Palette, can be now opened and moved as expected from one screen to the other. |
| Added the ability to scroll through and select search results using your mouse. |
| Added a confirmation dialog before running an import containing customized javascript. |
| Fixed an issue where the Storyboard Creator would reset to the original viewpoint if Pause was selected. |
| Fixed an issue where text was truncated in localized versions of the Welcome to InfraWorks dialog. |
| Fixed a stability issue that could occur when logging in or out of InfraWorks. |
| Fixed an issue in which a bounding box would not update after dragging and dropping a style from the style palette onto a model feature. |
| Fixed an issue in which the search field did not dynamically expand as text was entered. |
| Fixed an issue where you could not add a vertex to a selected feature. |
| Bridges and Tunnels |
| Fixed an issue where the 'Apply to' command did not refresh the view and displayed the incorrect number of bearings. |
| Fixed a stability issue that could occur when changing a parametric part name in the Configure Parametric Models dialog. |
| Fixed a performance issue that could occur when selecting bridge piers. |
| Fixed an issue where readded abutments and foundations that were previously deleted do not display on the bridge. |
| Fixed an issue where a tunnel did not highlight and the station gizmos do display when placed on an imported corridor. |
| Fixed an issue in which girder tilt did not adjust with the bottom slope of a deck. |
| Fixed an issue where some bridge components in the component type drop down list were not localized. |
| Fixed an issue where the generic object rotation gizmo toolbar did not match the skew value in the stack. |
| Fixed an issue where adjusting the Lateral Offset: Start setting of girders could cause them to not display. |
| Fixed an issue where changing the foundation height above ground value in the stack would not update correctly. |
| Fixed an issue where bridge and tunnel gizmos would disappear after publishing the civil structure. |
| Fixed an issue in which the assembly and part names were not reported in the param.xml file from the Inventor plugin. |
| Collaboration |
| Fixed an issue in which cloud based models were not accessible from the Home - Autodesk Docs tab. |
| Fixed an issue where historical information did not display when selecting the model instead of a specific proposal. |
| Fixed a memory issue that could prevent large (500MB and larger) DWG files from uploading to cloud correctly. |
| Fixed an issue where BIM 360 displays an incorrect North orientation. |
| Fixed an issue where linear decorations would not display when viewing published models in the Autodesk Docs viewer. |
| Decorations |
| Fixed an issue in which selecting multiple trees incorrectly displays a vertex error message. |
| Fixed an issue in which deleting a component road would leave behind its associated linear decorations. |
| Model Building |
| Fixed an issue where a selected area of interest and the model confirmation dialog do not clear after continuing to create a model. |
| Fixed an issue where partially published models were available but an email notified that model creation failed. |
| Fixed an issue where edits to a recently downloaded cloud model could not be synced. |
| Point Clouds |
| Fixed an issue in which terrain generation would incorrectly report issues with the dataset and would not complete. |
| Fixed an issue where a linear feature would not refresh after moving the Cross Section point. |
| Fixed a stability issue that could occur when entering the XY value of a point when drawing linear features. |
| Revit Data Exchange |
| Fixed an issue where a pier was not sent to Revit when the bridge is placed on a ramp two lane shoulder road assembly. |
| Fixed an issue where certain types of alignments such as compound spiral curves would not import into Revit. |
| Roadway Design |
| Fixed an issue where selecting a road grip that was not directly over a planning road would deselect the road. |
| Fixed an issue where converting geometry twice would cause the Profile view to disappear. |
| Fixed an issue that prevented Replace Assembly from working on roads less than 20 meters long. |
| Spreadsheets |
| Fixed an issue where Imperial girder and bearing dimensions were not correct when sent to a worksheet. |
| Terrain |
| Fixed an issue where strings on the Editing Trees context menu were not localized. |
| Fixed an issue where generated transverse lines would not display borders. |
| Improved the visual display of ground imagery that consists of various overlapping textures. |
| Fixed an issue in which the density slider did not display after drawing a new stand of trees. |
| Traffic Simulation |
| Fixed an issue where the Traffic Analysis Panel would not display when creating a traffic simulation. |
| Fixed an issue where moving a Traffic Study Area vertex did not update the vertex. |
| Fixed an issue where you could not resize a Traffic Study Area. |
Autodesk InfraWorks 2022 Hotfix 1 (September 2021 release)
| Bridges and Tunnels |
| Fixed an issue in which custom decks would disappear when changing the deck width from a slice. |
| Fixed a stability issue that could occur calculating super-elevation clearances when a deck was selected. |
| Fixed an issue in which bridge girders did not align properly with a stepped deck. |
| Fixed an issue in which the bridge deck content picker did not display content. |
| Fixed an issue in which the slice offset changed from Absolute to Relative when moved. |
| Fixed an issue in which girders could misalign when change deck width. |
| Fixed an issue in which a bridge deck slope calculated incorrectly when the road slope was zero percent. |
| Fixed an issue in which abutments skewed incorrectly when the ballast wall thickness was undefined. |
| Fixed an issue in which tunnel slices moved when a tunnel was modified. |
| Spreadsheets |
| Fixed an issue in which a bridge would not update after changing dimension in a spreadsheet. |
| Fixed an issue in which slice offsets would not update after changing dimension in a spreadsheet. |
| Fixed an issue in which a slice offsets would have different values when sent to a spreadsheet. |
| Added the ability to add and delete girder and deck slices using an exported spreadsheet. |
| Added the ability to update slice offsets to a spreadsheet and apply them in InfraWorks. |
| User Interface |
| Fixed an issue in which the Suitability Map Dialog would truncate when using the Activate Map drop-down menu. |
| Removed the Offset Lateral option from generic objects on terrain. |
| Added the ability for the content picker to allow part size changes for a cross frame or generic object set. |
| Made changes to the Part Sizes tab in the Configure Parametric Models dialog to better facilitate editing. |
| Revit Data Exchange |
| Fixed an issue in which stepped decks were segmented when imported into Revit. |
| Fixed an issue in which IMX data fails to import in Revit when the cross frame category is changed to bridge framing. |
| Fixed an issue in which box girders were imported into Revit as solid objects. |
| Quantities Reporting |
| Fixed an issue in which the Quantities panel failed to show information when a bridge cointained cross frames. |
Autodesk InfraWorks 2022 (April 2021 release)
| Bridges and Tunnels |
| Fixed an issue where the Offset:Station could not be changed for an individual bearing. |
| Fixed an issue where running refined bridge analysis took a long time when the edge detail option was checked on. |
| Fixed an issue where the girder section dimensions were not showing up in the stack when a slice was selected. |
| Fixed an issue where the refined bridge analysis was not marked out of date after a change to the girder material strength. |
| Fixed an issue where the pier skew was not correct on a wide road. |
| Fixed an issue where the generic object rotation value was not updating in the stack when tilting was turned on. |
| Fixed an issue where the generic object did not show up when placed in the model. |
| Fixed an issue where the number of cross frame groups was not reduced if the number of girders in a groups were reduced. |
| Fixed an issue where the tunnel import failed in Revit when the tunnel category was set to pipes. |
| Fixed an issue where the top of the abutment was not correct. |
| Fixed an issue where the bridge start station highlighting was not correct after changing the bridge start station. |
| Fixed an issue where the bridge clearance envelope was not displayed correctly on a curved bridge. |
| Fixed an issue where the bridge abutment bearings were not correct on an abutment with a large skew. |
| Fixed an issue where lofting errors displayed in Revit when importing a tunnel. |
| Added smaller required parameters for 3D Girders. |
| Provided default settings when the user creates custom bearings for parent type: 'All' by default. |
| Component Roads |
| Fixed an issue that a component road is not fully selected while calculating earthwork quatity for it. |
| Fixed an issue with the Profile View panel that caused the Title of the panel to display the wrong road name. |
| Fixed an issue exporting road alignments to Revit. Roads that included spirals curves would only would only import the part of the road up to the first spiral. With this fix the full length of the road will now be imported to Revit. |
| Create/Edit/Delete Core Feature |
| You can switch to "Shape Terrain" mode, no matter how many times we have clicked on the coverage. |
| Decorations |
| Fixed an issue with the Linear Decoration annotation lines displaying incorrectly in curves when the view was orbited to an oblique aspect. |
| General |
| Fixed an issue when exiting Oculus Rift mode. |
| Fixed an issue on close when the annotation edit tool was active. |
| Grading |
| Fixed a customer-reported issue that the model freezes with time creation. |
| Quantities Reporting |
| Fixed an issue that quantity highlighting was missing when opening the earthwork quantity and material quantity. |
| Tooltip & POI |
| Fixed an issue in which some strings in the undo tooltop were not localized. |
| Traffic Simulation |
| Fixed an untranslated string on the Traffic study warning dialog. |
