Fixed Issues
Add-Ins - 3D PDF |
---|
Improved stability when exporting to a 3D PDF file. INVGEN-13981 |
Add-Ins - Cable and Harness |
---|
Improved stability when editing the view orientation of a nailboard sheet. INVGEN-1251 |
Add-Ins - Content Center |
---|
Each type of Broached Hexagon Socket Set Screw (Flat Point, Cup Point Type I, Cup Point Type II, Cup Point Type III, Cup Point Type IV, Cup Point Type V, Oval Point, Half Dog Point, Cone Point, Flat Point), has the same Part Number. This caused issues with maintaining an accurate Bill of Materials. A new column, Type, has been added with type information in the Family table so that each family can be distinguished. INVGEN-1092 |
UNC no longer displays in the description field for UNF parts. INVGEN-1216 |
5 GOST washers supported by Design Accelerator are now available in Bolted Connection. In addition, 15 GOST washers now have the correct category parameter mapping. INVGEN-1253 |
CSN 425580 no longer has a typo in MEMBER_REVISION column and you can now, place members of this family. INVGEN-1268 |
The specified setting, Tools > Document Settings > Modeling > Participation in Assembly and Drawing Sections , now behaves as intended and no longer produces inconsistent result for sections in the assembly and drawing environments. INVGEN-1276 |
Bolted Connection is no longer placed upside down when using washer DIN 6796. INVGEN-2066 |
The thread hole size is now correct for standard part GB/T 5649-1985. INVGEN-6132 |
The Oval Head and Truss Head Full-Tubular Rivet are updated with correct values. The size of K diameter changed from the minimum constant value 0.375 inch to To Head value from the Standard (L value). INVGEN-12385 |
GOST bolts Align iMate fixed for 65 families. INVGEN-13471 |
Improved stability when calling ContentFamily.CreateMember() with an invalid argument. INVGEN-13820 |
Fixed issue with GOST content center bolts failing to maintain insert constraint imate. INVGEN-18578 |
The following ISO Standards are now available: Torx Screws (ISO 14579,14580, 14581, 145582, 14583,14584,14585,14586,14587. INVGEN-18581 |
More ANSI smaller sizes in Frame Generator are now available for square steel tubing. INVGEN-18583 |
The DIN EN 10210-2 Standards are now updated to include:,1) BS EN 10210-2:2006 Circular Hollow Section, 2) BS EN 10210-2:2006 Rectangular Hollow Section, and 3) BS EN 10210-2:2006 Square Hollow Section. INVGEN-18584 |
The Content Center British Standards are updated with the following standards: BS EN ISO 4017, BS EN ISO 8676, BS EN ISO 4014, BS EN ISO 4026, BS EN ISO 4027, BS EN ISO 4028, BS EN ISO 4029, BS EN ISO 4762, BS EN ISO 8765. INVGEN-18586 |
The material guide no longer incorrectly copies values from from column d to new members in column D in Inventor Content Center. INVGEN-20279 |
Resolved issue where the Replace from Content Center command doesn't replace a Content Center part when a non-master positional representation is active. INVGEN-20360 |
The space missing between the end of the first sentence and beginning of the second sentence in the Confirm Deletion Content Center warning message has been added. INVGEN-20475 |
Duplicate parts numbers no longer display in Content Center families. INVGEN-23213 |
Add-Ins - Design Accelerator |
---|
Issue resolved where the Bolted Connection - Concentric option failed to work correctly. INVGEN-13174 |
Add-Ins - Frame Generator |
---|
Resolved issue with Save operation: You can now insert, edit and delete Frame Generator members in without any restrictions. INVGEN-2735 |
Resolved issue where custom parameters change units when inserted from Frame Generator. INVGEN-2882 |
Improved stability when applying trim/extend features to both sides of the same frame member. INVGEN-2919 |
Improved stability when changing the size of a Frame Generator member. INVGEN-4995 |
Resolved issue with Frame Generator failing to insert and create frame members. INVGEN-20904 |
Add-Ins - Simulation - Dynamic Simulation |
---|
Improved stability when running a simulation on large assemblies in the Dynamic Simulation environment. INVGEN-17014 |
Improved stability when entering the Dynamic Simulation environment. INVGEN-24329 |
Add-Ins - Simulation - Stress Analysis |
---|
Resolved issue where a message about thin bodies incorrectly displayed when starting the Stress Analysis > simulate command. INVGEN-13452 |
Improved stability when creating a study in the Stress Analysis environment. INVGEN-16994 |
Improved stability when working with the Stress Analysis solver. INVGEN-17713 |
Resolved issue where Inventor was not computing simulation results. INVGEN-20049 |
Add-Ins - Tube and Pipe |
---|
Improved stability when editing a hose length after creating a sick hose route. INVGEN-9024 |
The issue where appearance values were not updating correctly after making changes with the Authoring command is resolved. INVGEN-10838 |
Resolve issue where the holes in a tube created with Tube and Pipe weren't being computed in the correct order. INVGEN-20422 |
Improved robustness and stability when editing a large run with Tube and Pipe. INVGEN-22808 |
Improved stability when using the Undo command during Tube & Pipe route creation. INVGEN-23316 |
Add-Ins - iCopy |
---|
Resolved issue where the message "The source Assembly contains unresolved components. All components must be resolved before continuing." incorrectly displays when working with the iCopy command. INVGEN-1040 |
Improved stability when working with the iCopy command. INVGEN-1236 |
Resolved issue where rules that that were created in Inventor 2017 or earlier and included the line: AddReference "System.Core.dll" would fail. INVGEN-24834 |
Add-Ins - iLogic |
---|
Improved stability when placing an iLogic component into an assembly. INVGEN-8652 |
Resolved issue when accessing the ComponentDefinition property in iLogic in different types of document objects. INVGEN-11073 |
Improved stability when placing a component in the top level assembly using iLogic. INVGEN-14484 |
Improved stability when saving/running an iLogic rule with an unsupported object type. INVGEN-14797 |
Resolved an issue where the Non-set date in iProperties returned the default value instead of a blank field. INVGEN-15929 |
Resolved an issue where the Non-set date in iProperties weren't returning a null string as expected. INVGEN-16240 |
Resolved issue where an iLogic rule was renaming Polish constraints. INVGEN-18589 |
Resolved issue where an iLogic rule containing the code snippet "iLogicForm.Show"causes a crash of .NET Framework in Inventor. INVGEN-21205 |
Resolved issue where after clicking Save in the iLogic Rule Editor, the scrolling mouse wheel changed the log level unexpectedly. INVGEN-21484 |
Resolved an issue where running the GoExcel.Open() function a second time leads to incorrect behavior. INVGEN-23330 |
Resolved an issue where a background window would often pop up after closing an iLogic form. INVGEN-23499 |
Assemblies |
---|
Improved stability when adding Tube and Pipe routes to a file. INVGEN-11196 |
Improved stability when opening assembly and creating custom properties through the Inventor API. INVGEN-15091 |
Assemblies - BOM |
---|
Resolved an issue where the Capitalization option in a Bill of Materials wasn't working. INVGEN-5756 |
Assemblies - Constraints-Joint-Assemble |
---|
Improved stability when constraining an assembly. INVGEN-15909 |
Resolved issue where selected work features in the graphics windows aren't highlighted in the browser, and when selected work features in the browser aren't highlighted in the graphics window when the Constrain dialog box is open. INVGEN-16652 |
Resolved issue where constraints lose reference to geometry after updating an assembly that was saved in Inventor 2014. INVGEN-16715 |
Improved performance when using Rebuild All on migrated data. INVGEN-22035 |
Assemblies - Derived-Shrinkwrap |
---|
Improved stability when moving the End Of Part marker. INVGEN-21304 |
Assemblies - Design Views |
---|
Resolved issue with view representations where an overridden component color in an assembly wasn't displaying correctly in the presentation (.ipn) file. INVGEN-12379 |
Resolved an issue where appearance overrides in assembly files were not appearing in shaded drawing views. INVGEN-13337 |
Resolved issue where the API was not recording Representation Associativity correctly. INVGEN-19509 |
Assemblies - Express |
---|
Improved stability when working in an Assembly in Express mode and using the Open command from the BOM. INVGEN-16529 |
Assemblies - LOD |
---|
Improved stability when closing and then saving files all files open in an Inventor session. INVGEN-17039 |
Assemblies - Mirror-Copy-Replace |
---|
Improved stability when mirroring part in assembly. INVGEN-15913 |
Assemblies - Weldments |
---|
Invalid error message no longer displays when adding weldments after constraining a part nto a post machined hole. INVGEN-5207 |
API now recognizes a cosmetic weld loop. INVGEN-11996 |
Drawings |
---|
Improved stability when working with the Design Doctor in a drawing. INVGEN-14270 |
Drawings - Annotations - Balloon |
---|
Resolved issue where the iProperties for parts list and balloons were not displaying correctly. INVGEN-18339 |
Drawings - Annotations - Text |
---|
The decimal precision of text and leader text are now equal. INVGEN-12729 |
Drawings - Migration |
---|
Resolved issue where a reference component displays in R2014 but wasn't displaying in R2019. INVGEN-22058 |
Drawings - Sheets |
---|
Improved stability when deleting a sheet in drawing file with a picture attached. INVGEN-17167 |
Drawings - Tables |
---|
Resolved issue where the Parts List QTY value doesn't update correctly after applying the "QTY of visible items only" filter. INVGEN-22681 |
Drawings - Title Blocks-Borders |
---|
Resolved issue where deleting the font or deleting a label from a border zone produced unexpected behavior. INVGEN-12733 |
Drawings - Views |
---|
Resolved issue where components with a status set to invisible were appearing in drawing views. INVGEN-4996 |
Placed orthogonal views that include a rotation now display correctly. INVGEN-14534 |
Resolved issues that prevented changing an Overlay View from Raster mode. INVGEN-15103 |
Resolved issue where the warning, "Salvaged view: May not be accurate.", incorrectly displays next to the view icon in the browser. INVGEN-18689 |
Opening a drawing from the assembly browser will now look for the default drawing template as specified in Drawings tab/Application options. INVGEN-20649 |
Resolved issue where solid geometry disappeared when using the Replace model references tool in the drawing environment. INVGEN-21364 |
Model Based Dimension |
---|
Weldment symbols, whose visibility are set to invisible, are no longer exported to a DWF as visible. INVGEN-13033 |
Improved stability when working with the Tolerance Feature command. INVGEN-18229 |
My Home |
---|
Scrolling through projects list on the Home screen now honors the mouse drive scroll settings. INVGEN-2933 |
Parameters |
---|
Improved stability when editing a rectangular sketch pattern where one of the occurrence count parameters is set to "1 ul". INVGEN-17600 |
Parts |
---|
Improved stability when moving an End of Part marker under a selected feature or to the Origin folder. INVGEN-1860 |
Parts - 2D Sketch |
---|
Resolved issue in a 2D Sketch where one or more dimensions driven by sketch block dimensions failed to update correctly. INVGEN-1282 |
Improved stability when creating a rectangular pattern in 2D sketch. INVGEN-4701 |
Improved stability when editing a sketch triggered by an iLogic event trigger. INVGEN-13739 |
Inventor API BrowserPane: Reorder now correctly reorders part nodes within an assembly. INVGEN-13840 |
Improved stability when displaying all degree of freedom in a sketch. INVGEN-16081 |
Improved stability when editing a spline in a 2D sketch. INVGEN-18246 |
Parts - 3D Sketch |
---|
Fix the issue on Sketch3D.SilhouetteCurves.Add method. INVGEN-18131 |
Improved stability when editing a spline in a 3D sketch. INVGEN-19189 |
Parts - Extrude-Revolve-Sweep-Coil |
---|
Resolved issue where one or more solid bodies were incorrectly being automatically highlighted. INVGEN-14809 |
Improved stability when pressing ESC or Undo to cancel a preview when using the Hole/Extrude/Revolve commands. INVGEN-16667 |
Parts - Freeform |
---|
Improved stability when working with models created from the Freeform Match Edges command. INVGEN-7593 |
Issues with dimension entries in the TSpline primitive creation dialogs (box, plane, quadball, etc) is resolved. INVGEN-16350 |
Parts - Hole-Threads |
---|
Resolved issue where selection is lost after selecting a sketch with a window and then entering the hole command. INVGEN-18051 |
Resolved issue where a shared sketch becomes hidden when working in the Hole command while there is another feature between the Hole feature and the sketch which is consumed by the Hole. INVGEN-18099 |
Resolved issue where the hole panel didn't allow the direct selection (using CTRL+ Click) of a sketch dimension. INVGEN-20697 |
There are no longer differences between the Tolerance values displayed in the Hole dialog box and the graphics window when retrieving dimensions in Inventor drawings. INVGEN-21521 |
Resolved issue where the tolerance value wasn't displaying correctly when closing the Hole dialog box while Tolerance dialog box is still open. INVGEN-23013 |
Parts - Measure |
---|
Improved stability when using the measure command. INVGEN-18598 |
Improved stability when when using the measure command on an AutoCAD block in a part (.ipt) file. INVGEN-20171 |
Parts - Properties |
---|
Trailing commas no longer display in German Inventor iProperty fields. INVGEN-16845 |
The iProperty date value now shows the correct date. INVGEN-22400 |
Parts - Sheet Metal |
---|
Improved stability when working Sheetmetal parts created in earlier versions of Inventor. INVGEN-1215 |
Improved stability with working with with flat pattern sketch projection. INVGEN-18470 |
Resolved issue with sheet metal where the Refold command was not folding all sections. INVGEN-23102 |
Parts - Work Features |
---|
Resolved issue where the Select Other menu option was not available when creating a work feature. INVGEN-12065 |
Parts - iFeature-iPart |
---|
Improved performance when generating iPart members. INVGEN-10880 |
iPart member names with a trailing space, such as "Medium Plate 122-BKA ", no longer trigger an invalid error message. INVGEN-21904 |
Platform |
---|
The abbreviation"po" is now recognized as an abbreviation for "Pouce", which is French for inch. INVGEN-1014 |
Resolved issue with an API command that prevented moving a UCS into an assembly folder. INVGEN-2942 |
Improved stability when saving to a drive with very little free disk space. INVGEN-8765 |
Deployed Application Options settings are now distributed to all users. INVGEN-11905 |
The Open File dialog box is updated to highlight the previously opened file in the current Inventor session. INVGEN-12156 |
Improved stability when launching the Customer Error Report (CER) dialog after clicking OK to an error message indicating a component failed to load. INVGEN-13954 |
Resolved issue where the GetTemplateFile API in environments with multiple language packs returned a NULL value. INVGEN-13999 |
Improved stability when working with very large drawing files. INVGEN-15122 |
Improved stability when saving a part. INVGEN-15634 |
Shaded and break views now show the correct color when exported to PDF. INVGEN-15646 |
Write-protected files, such as content center parts can no longer be modified by the API or iLogic rules to maintain consistency with the UI behavior. Setting the hidden _LibraryDocumentModifiable API property allows the API and iLogic rules to modify write-protected files. See [https://knowledge.autodesk.com/support/inventor-products/troubleshooting/caas/sfdcarticles/sfdcarticles/iLogic-API-VBA-error-when-modifying-write-protected-library-documents.html] for more information. INVGEN-13347 |
Resolved API issue where the Transparent Background was not setting the background correctly. INVGEN-15685 |
Resolved issue with density showing as 0.000 for materials when calculating the weight of a part. INVGEN-16085 |
Improved stability when closing file after launching the Bill of Materials. INVGEN-16180 |
Improved stability when accessing DWG component properties through the API while in-place editing a component. INVGEN-16791 |
Improved stability in general when working in Inventor. INVGEN-16504 |
Resolved issue where CPU usage wasn't decreasing correctly after creating a Section View or importing mesh data. INVGEN-17007 |
Improved stability in part files when changing OLE source. INVGEN-18177 |
Resolved issue that prevented component patterns from being added to a folder via the API. INVGEN-18783 |
Resolved issue where Window Explorer crashes when changing the view of a folder with a large amount of Inventor files from Medium icons to Large icons. INVGEN-19069 |
Resolved issue where the the last 3 characters in a file name was getting cut off after exporting the file to a different CAD format. INVGEN-19569 |
Improved stability when working with Spline control points. INVGEN-20346 |
Resolved issue where auto-centering was not functioning correctly when performing an orbit operation with a 3Dconnexion Space Mouse. INVGEN-22656 |
Presentations |
---|
Improved stability when updating a presentation file in snapshot view. INVGEN-15851 |
Improved stability when inserting an assembly into a presentation (.ipn) file. INVGEN-19220 |
Translators |
---|
Resolved issue where the degrees embedded in an Inventor welding symbol weren't displaying correctly and were changing position after exporting to an AutoCAD .dwg file. INVGEN-4195 |
Shaded Views now display correctly when opening an Inventor DWG file in AutoCAD. INVGEN-14177 |
A component in a sub-assembly pattern set to invisible no longer reverses to visible after exporting to a STEP file, and importing back into Inventor. INVGEN-15125 |
Improved stability when republishing DWFx files in Inventor. INVGEN-17163 |
Resolved issue with part files containing a DXF not opening. INVGEN-21096 |
Resolved issue where the import options for STL and OBJ files were incorrectly disabled. INVGEN-22995 |
UI - Browser |
---|
Resolved issue where the shortcut keys, F2 and the Up/ Down arrow key, stopped working in a browser after closing a warning message. INVGEN-7640 |
Resolved issue where SHIFT key was not working when trying to select multiple components in the browser. INVGEN-15666 |
Improved stability when creating certain sketches through API. INVGEN-16490 |
UI - Mini Toolbar |
---|
Improved stability when creating a section view and select other is enabled. INVGEN-24666 |