Defines edits to corners in flange and contour flange features.
- Access
- In the graphics window, over the corner you want to modify, click Corner Seam Edit
.
- Overlap
- Controls the overlap type and gap size for the selected corner seam.
- Type
-
- No Overlap/Symmetric Gap/45 Degree
- Overlap
- Reverse Overlap
- No Seam
- Gap Size
-
- GapSize Can include as an equation variable. Values other than GapSize are accepted.
- Measure Measures an object, and inserts the measured value for the gap size.
- Show Dimensions Shows dimensions associated with a features to insert for the gap size.
- List Parameters Shows sheet metal parameter names to insert for the gap size.
- Feature Value Inserts the “d” variable value for the gap size.
- Percentage Overlap
- Specifies a value from 0 to 1 indicating a percentag of overlap. Valid for only Overlap or Reverse Overlap gap types.
- Measure Inserts a measured value for the percentage overlap.
- Show Dimensions Shows dimensions associated with a features to insert for the percent overlap.
- List ParametersShows sheet metal parameter names to insert for the percent overlap.
- Relief
- Controls the relief type and size for the selected corner seam.
- Type
- Specifies corner relief type:
- Round
- Applies the Round relief type to the selected 2-bend corner.
- Round (Tangent)
- Applies a Round Tangent relief type to the selected 2-bend corner.
- Round (Vertex)
- Applies a Round Vertex relief type to the selected 2-bend corner.
- Square
- Applies the Square relief type to the selected 2-bend corner.
- Square (Vertex)
- Applies the Square Vertex relief type to the selected 2-bend corner.
- Tear
- Applies the Tear relief type to the selected 2-bend corner.
- Trim to Bend
- Applies the Trim to Bend relief type to the selected 2-bend corner.
- Linear Weld
- Applies the Linear Weld relief type to the selected 2-bend corner.
- Arc Weld
- Applies the Arc Weld relief type to the selected 2-bend corner.
- Laser Weld
- Applies the Laser Weld relief type to the selected 2-bend corner.
- Intersection
- Applies the Intersection relief type to the selected 3-bend corner
- No Replacement
- Applies the No Replacement relief type to the selected 3-bend corner.
- Full Round
- Applies the Full Round relief type to the selected 3-bend corner.
- Jacobi Radius Size
- Reapplies the default Jacobi radius size relief to the selected 3-bend corner.
- Round
- Relief Size
- Specifies the size of a corner relief when you select 2-bend or 3-bend corners.
- CornerReliefSize Unmodified corners defaults to the value of this named parameter.
- Measure Measures an object, and inserts the measured value for the relief.
- Show Dimensions Shows dimensions associated with a features to insert for the relief.
- List Parameters Shows sheet metal parameter names to insert for the relief.
- Feature Value Returns the corner relief size to a value specified for the feature. Available only during edits.
Note: Measure, Show Dimensions, List Parmeters, and Feature Value are available on the Real Value Edit drop-down list.