Fixed Issues
| Add-Ins |
|---|
| Improved stability when using a CAM toolpath template. INVGEN-70712 |
| Add-Ins - 3D Annotations |
|---|
| Resolved an issue where the Common Zone modifier was missing for the ISO 3D annotation standard. INVGEN-74784 |
| Add-Ins - BIM Translator |
|---|
| Resolved an issue where the center point of exported RFA differs from the original center point in Inventor. INVGEN-54852 |
| Resolved an issue with displaced connectors and UCS after exporting certain models as an RFA file. INVGEN-61861 |
| Resolved an issue with no output geometry when exporting large IFC files. INVGEN-67570 |
| Improved stability when exporting to an RFA file. INVGEN-72692 |
| Resolved an issue where IFC files exported from Inventor contained triangulated geometry for some models. INVGEN-75807 |
| Add-Ins - Cable and Harness |
|---|
| Resolved a Report issue where part names were missing values due to the use of special characters such as ". INVGEN-70228 |
| Resolved an issue causing the C&H Splice command to crash when there is no sketch. INVGEN-72118 |
| Add-Ins - Content Center |
|---|
| Fixed the precision of the ANSI ASTM A6 dimensions to match the standard. INVGEN-40680 |
| Resolved an issue in the Content Center for families JIS B 1180. Unsupported sizes were marked by asterisks. INVGEN-40743 |
| Fixed the Flange DIN EN 1092-2 per standard. INVGEN-50397 |
| Corrected a typo in the bearing DIN 625 SKF family table. INVGEN-51174 |
| Corrected the Bolt Hole Diameter values of the Content Center DIN EN 1092-2 Blank Flange Type 05 family, according to actual standard values. INVGEN-57376 |
| In Beam and Column Calculator, the Wk, Jk values are now calculated. INVGEN-63056 |
| Corrected the Nominal Diameter values of the Content Center plug family, ISO 4144 Plugs P1, according to actual standard values. INVGEN-64692 |
| Corrected values in Content Center family table for the ISO 4144 Reducing bushings B1. INVGEN-64693 |
| Corrected the description of the Content Center family IS:1364-3. INVGEN-71558 |
| Resolved a customer issue with a specific Content Center family. INVGEN-72413 |
| Improved stability when refreshing Content Center. INVGEN-73392 |
| Add-Ins - Design Accelerator |
|---|
| Corrected the iMate orientation of the DIN 6796 washer. INVGEN-11718 |
| Fixed formula calculating minimal shaft diameter in the Involute Splines Calculator. INVGEN-73263 |
| Error messages with possible solutions are now displayed when it is not possible to create hole using bolted connection. INVGEN-73422 |
| Resolved a Component Generator issue preventing the selection of reference feature entities. INVGEN-74005 |
| Resolved an issue in Bolted Connection where it was not possible to drill a hole when the end face is from an assembly feature. INVGEN-74194 |
| Resolved an issue with Bolted Connections and blind holes. INVGEN-74212 |
| Add-Ins - Factory Design Utilities |
|---|
| Improved stability when creating a Factory Layout. INVGEN-60207 |
| Resolved an issue where a node state error was shown in the model browser when creating a new connector. INVGEN-72651 |
| Add-Ins - Frame Generator |
|---|
| Corrected the Bulb Height value in Content Center table of the frame NF EN 10067 - 280 x 11. INVGEN-64648 |
| Resolved an issue with the algorithm that calculates frame length. INVGEN-72232 |
| Resolved an issue in the Frame Generator where frames were not positioned correctly. INVGEN-72427 |
| Add-Ins - Simulation - Dynamic Simulation |
|---|
| Improved stability in Dynamic Simulation after using the Insert Joint command. INVGEN-74843 |
| Add-Ins - Simulation - Stress Analysis |
|---|
| Resolved FEA unit type and text issues for localized versions. INVGEN-63162 |
| Stress Analysis and Frame Analysis PDF, DOCX and RTF reports have images resized to fit to the sheet size. INVGEN-68551 |
| Add-Ins - Tube and Pipe |
|---|
| Resolved an issue where the computed length of bent tubing was incorrect. INVGEN-66889 |
| Resolved an issue with snapping to points when positioning a hose end. INVGEN-72536 |
| Improved stability and robustness in Tube and Pipe. INVGEN-73268 |
| Resolved an issue where End-Point values in the PCF output ISOGEN file were rounded to the same count of decimal places. INVGEN-74473 |
| Add-Ins - iLogic |
|---|
| Improved Rule indentation in Select Case code blocks. INVGEN-38490 |
| Improved stability when a rule is triggered by changing an iProperty or parameter value. INVGEN-62751 |
| Resolved an issue where parameters in derived destination won't update when name and value were changed. INVGEN-64773 |
| Resolved an issue that arose when using an Ampersand in the name of iLogic rules and forms in the ribbon. INVGEN-70246 |
| If an iLogic rule encountered an error after the Apply or OK button was used in an iLogic form, iLogic did not attempt to run any other rules that may have been queued. INVGEN-74804 |
| AnyCAD - Revit |
|---|
| Resolved an issue where some rounded parts became faceted when exported as an RFA file. INVGEN-57986 |
| Resolved an issue where a Revit view may not display after using Rebuild All. INVGEN-65717 |
| Resolved a Simplify command issue where exporting as an RVT file resulted in missing elements in a customer dataset. INVGEN-66034 |
| Resolved an issue where objects were being displayed as transparent after importing a Revit file using the Convert Model Import type. INVGEN-67681 |
| Resolved error that occurred when importing an RVT to Inventor that contained overlapping geometry. INVGEN-73296 |
| Application Home |
|---|
| Resolved an issue where guided tutorials could not be started in sketch mode. INVGEN-69269 |
| Assemblies |
|---|
| Resolved an issue where the center of gravity is not shown as inactive when mass is not yet calculated in model state. INVGEN-69057 |
| Resolved an issue where the assembly freezes window top position. INVGEN-69501 |
| Improved performance of the close operation and suppress component operation in assemblies with a large number of graphics nodes. The close operation is now 10 times faster, and the suppress operation is 5 times faster. INVGEN-71487 |
| Assemblies - Adaptivity-Flexible |
|---|
| Resolved an issue where the related subassemblies won't move while a component is being dragged. INVGEN-61500 |
| Resolved an issue with inconsistent behavior of the flexible assembly in Inventor 2021 and Inventor 2023. INVGEN-68066 |
| Improved stability when copying a flexible assembly into another assembly. INVGEN-75366 |
| Assemblies - BOM |
|---|
| Resolved an issue where iParts properties in an iAssembly are not updated in a parts list. INVGEN-68732 |
| Assemblies - Constraints-Joint-Assemble |
|---|
| Resolved an issue with incorrectly displayed iMate constraint icon. INVGEN-65704 |
| Resolved an issue where Inventor would become unresponsive after using the Home key to edit a dimension field. INVGEN-68990 |
| Resolved an issue with the iMate graph not displaying correctly. INVGEN-75897 |
| Assemblies - Derived-Shrinkwrap |
|---|
| Improved stability when saving simplified part files. INVGEN-47083 |
| Resolved an issue with retaining a derived part with included bounding boxes. INVGEN-66502 |
| Improved stability when switching templates in the Simplify dialog. INVGEN-68385 |
| Resolved an issue where using the simplification API caused a crash. INVGEN-69136 |
| Added the Edit and Accept buttons for handling Simplification errors. INVGEN-69289 |
| Improved stability when simplifying an assembly. INVGEN-69548 |
| Assemblies - Express |
|---|
| Improved a stability issue that could occur when working with patterns in embedded express data. INVGEN-68627 |
| Assemblies - Features-Sketch |
|---|
| Improved stability when editing a chamfer for a weldment containing legacy welds. INVGEN-72695 |
| Assemblies - Mirror-Copy-Replace |
|---|
| Resolved an issue where Custom properties were lost when creating a copy of the component with the Copy Component command. INVGEN-68080 |
| Improved stability when replacing one sub-assembly with another sub-assembly. INVGEN-74324 |
| Improved stability after mirroring a frame. INVGEN-74619 |
| Assemblies - Pattern |
|---|
| Resolved an issue that the preview of a component pattern doesn't display correctly when dragging. INVGEN-52043 |
| Assemblies - iAssembly |
|---|
| Resolved an issue where the iAssembly table showed the component as "Include/Exclude", while the spreadsheet showed "1/0". INVGEN-64297 |
| Design Views |
|---|
| Resolved an issue where the associativity of view representation did not take effect. INVGEN-75265 |
| Drawings |
|---|
| Resolved an issue where a sick Chamfer Note could not be reattached using the Recover command. INVGEN-70221 |
| Drawings - Annotations |
|---|
| Resolved an issue with incorrect tolerance values for JS7 and JS9. INVGEN-13506 |
| Resolved an issue where annotations were lost after an update of a view. INVGEN-65942 |
| Resolved a misalignment issue caused by a Secondary fillet weld symbol. INVGEN-67635 |
| Resolved an issue where Model State could prevent some dimensions to be retrieved. INVGEN-68355 |
| Improved a stability issue that occurred when selecting multiple adjacent dimensions, clicking the Chain button, and then pressing the [ENTER] key. INVGEN-68428 |
| Resolved an issue where creating a centermark in an imported ACAD file caused a crash. INVGEN-68791 |
| Resolved an issue with relocation of a static sketch symbol. INVGEN-68977 |
| Revolved an issue where migrated sketch symbols may produce unexpected results. INVGEN-70385 |
| Resolved an issue where it wasn't possible to select geometry from the overlapping views when using Ordinate Dimensions. INVGEN-72835 |
| Resolved an issue where pressing the Enter key after placing a Chain Set dimension would create a duplicate dimension. INVGEN-72917 |
| Drawings - Annotations - Balloon |
|---|
| Resolved an issue where it wasn't possible to attach a balloon to an iPart in an iAssembly. INVGEN-66590 |
| Resolved an issue where a balloon without text attached to another balloon was not rendered correctly. INVGEN-70831 |
| Drawings - Annotations - Text |
|---|
| Resolved an issue where the Numbering button wasn't highlighted when numbering was enabled. INVGEN-64401 |
| Drawings - Revision Cloud |
|---|
| Resolved an issue when a Revision cloud is being put on the text, its contours were overlapped by a text. INVGEN-73365 |
| Drawings - Sheets |
|---|
| Resolved an issue with missing material name in the title block after updating the sheet name in DeferUpdate mode. INVGEN-66761 |
| Drawings - Styles |
|---|
| Resolved an issue with unsupported Japanese font for hole notes. INVGEN-64744 |
| Drawings - Tables |
|---|
| Resolved an issue causing the Parts List filter to switch from the active view to the primary view. INVGEN-66499 |
| Drawings - Views |
|---|
| Resolved an issue where the view rotation isn't preserved after editing the drawing view. INVGEN-50555 |
| Resolved an issue where the same model displayed different hatches on different section views. INVGEN-55833 |
| Resolved an issue where the view moved from its original position after a change in the source document. INVGEN-67342 |
| Resolved an issue where the application option 'Show Preview As Bounding Box' did not work for Section views. INVGEN-68478 |
| Resolved an issue where rotated section views were not aligned correctly. INVGEN-69330 |
| Resolved an issue where a view with an invalid break view cannot be deleted. INVGEN-69820 |
| Model States |
|---|
| Improved performance of the model state table containing hundreds of columns. INVGEN-67200 |
| Resolved an issue where constraints would not function in model states when Position Representation was enabled. INVGEN-67505 |
| Resolved an issue where the Distance B in an asymmetric extrusion can't be saved in model states. INVGEN-67508 |
| Improved performance when switching model states. INVGEN-67587 |
| Resolved an issue that occurred when opening a legacy assembly with an LOD having 3D annotations. INVGEN-67904 |
| Improved a stability issue that occurred when saving a file with a long file name and the double-byte character set system. INVGEN-68130 |
| Resolved an issue where an endless save loop occurs in an iLogic trigger when a subassembly contains model states. INVGEN-68363 |
| Improved stability when editing model states via excel and saving it. INVGEN-70077 |
| Resolved an issue where the Member column in the model state conflicted with a parameter of the same name. INVGEN-71648 |
| Resolved an issue where an error prompted when placing an assembly that was saved as a copy from its source assembly. INVGEN-73863 |
| Improved performance of calculating physical properties for the entire assembly, even with suppressed components. INVGEN-74213 |
| Model States - API |
|---|
| Resolved an issue where the "Model State Activated" trigger doesn't work when switching from a Substitute to a model state. INVGEN-65423 |
| Resolved an issue where a model state fails to activate via the Inventor API due to the character case used in the model state name. INVGEN-68143 |
| Resolved an issue in Representations where the design view settings don't work for FileUIEvents.OnFileInsertDialog. INVGEN-71433 |
| Improved performance of reading model state table through API. INVGEN-71986 |
| Improved performance of switching model states and reading BoM through API. INVGEN-72473 |
| Model States - Assembly |
|---|
| Resolved an issue where mass properties are not out-of-date after suppressing a sub-component. INVGEN-55801 |
| Model States - BoM - Partslist |
|---|
| Resolved an issue where a drawing part list doesn't update the material after a model state change. INVGEN-67722 |
| Resolved an issue in iLogic where checking for property updates doesn't work on sub assemblies. INVGEN-69652 |
| Resolved an issue where BOM QTY shows an Error. INVGEN-69987 |
| Model States - Substitute |
|---|
| Resolved an issue where "Unable to update file references..." message pops up when opening renamed Inventor 2020 files with level of detail substitute in Vault. INVGEN-69661 |
| Resolved an issue where the iMate on the substitute component became erroneous after rebuilding an assembly. INVGEN-73000 |
| Parts |
|---|
| Resolved a decal display issue that occurred when opening a document using Vault. INVGEN-58268 |
| Resolved an issue where bend part would not function under specific circumstances. INVGEN-61112 |
| Resolved an issue with disabled work feature commands in the Solid Edit environment. INVGEN-66643 |
| Resolved an issue causing a feature error after rebuild all. INVGEN-67048 |
| Resolved an issue causing a crash when opening a specific part file. INVGEN-67955 |
| Resolved a crash issue when opening a part file. INVGEN-69859 |
| Resolved an issue with errors displaying after using the GetMinimumDistance function. INVGEN-69934 |
| Improved stability when a corrupted part file was opened. INVGEN-74271 |
| Parts - 2D Sketch |
|---|
| Improved stability in Inventor Nastran when redefining a sketch. INVGEN-63236 |
| Resolved an issue where the linked image didn't update automatically. INVGEN-66797 |
| Resolved an issue where the text orientation changes after editing text in the sketch. INVGEN-66801 |
| Resolved an issue where the Enter key didn't terminate and restart the sketch line command. INVGEN-68372 |
| Improve the stability when creating sketch lines with an intersection snap point. INVGEN-69352 |
| Parts - 2D Sketch - Dimension and Constraint |
|---|
| Resolved a decimal separator issue that affected sketch dimension text formatting/creation. INVGEN-65301 |
| Improved stability after dimensioning a Curved Slot. INVGEN-68801 |
| Parts - 3D Sketch |
|---|
| Added shortcut key during projection to toggle the line type in Sketch. INVGEN-71911 |
| Parts - Direct Edit |
|---|
| Improved stability during direct edit. INVGEN-72279 |
| Parts - Extrude-Revolve-Sweep-Coil |
|---|
| Resolved an issue with reversed sweep direction. INVGEN-65763 |
| Parts - Finish Feature |
|---|
| Resolved an issue where custom iProperties were not being updated after modifying the parameters of the Finish feature. INVGEN-74662 |
| Parts - Mirror-Pattern |
|---|
| Improved performance for some Sketch Based Pattern workflows. INVGEN-67763 |
| Resolved an issue where the sketch driven pattern didn't match the selected base point. INVGEN-68151 |
| Improved compute performance for parts containing patterns. INVGEN-70110 |
| Parts - Properties |
|---|
| Improved stability when changing customized properties. INVGEN-68179 |
| Resolved an issue with incorrect custom iProperties values. INVGEN-71763 |
| Parts - Sheet Metal |
|---|
| Resolved a Mirror feature issue preventing the patterning of some punch tool iFeatures in Inventor 2023. INVGEN-67719 |
| Improved stability when moving the end of the bend. INVGEN-69546 |
| Resolved an issue where Inventor crashes when creating a fillet on a sheet metal part. INVGEN-70143 |
| Improved stability when editing a sheet metal flat pattern. INVGEN-71593 |
| Improved performance in Sheet Metal when editing Refold. INVGEN-71774 |
| Parts - Surface |
|---|
| Improved performance when creating a drawing view using a part containing specific geometry. INVGEN-68693 |
| Resolved an issue causing a crash when clicking Finish in the construction environment. INVGEN-71331 |
| Parts - iFeature-iPart |
|---|
| Resolved an issue where a feature is not correctly extracted to an iFeature. INVGEN-58953 |
| Resolved an issue where an iPart member file has different iLogic triggers with a factory file. INVGEN-64375 |
| Resolved an issue where the Nominal Value and Model Value are wrong when changing the Evaluated Size for iFeature Parameters. INVGEN-64505 |
| Resolved an issue where some parameter tolerances were not saved when creating an iFeature from a Hole feature. INVGEN-65339 |
| Resolved an issue preventing the activation of a Design Accelerator iPart member. INVGEN-67231 |
| Resolved an issue where an iPart does not work when using the Show Extended Name option. INVGEN-68821 |
| Resolved an issue where the iPart file size is increasing after the iPart member is switched and saved. INVGEN-71355 |
| Platform |
|---|
| Resolved an issue where Custom iProperties weren't found in the Find Files dialog. INVGEN-65957 |
| Improved messaging and workflows when attempting to open an out-of-date file. INVGEN-67103 |
| Resolved an issue where a transaction started in an API client could not be aborted if there was a document save API call. This required changes in iLogic rules containing such code. INVGEN-67313 |
| Resolved an issue where the Vault option was missing when editing a Project in the Project Manager. INVGEN-67319 |
| Resolved an issue where the Save options are ignored when importing Application Options with the command line. INVGEN-68081 |
| Resolved an issue when using Redo on derived features. INVGEN-70162 |
| Resolved an issue when saving a drawing containing a large number of views. INVGEN-70178 |
| Resolved an issue that, when running multiple instances of Inventor, the second session would not be usable when the first session was busy. INVGEN-70317 |
| Resolves an issue where a file can report as Read-only after the first save when the template contains text populated by iProperties. INVGEN-70638 |
| Resolved an issue where merging the edges of Freeform objects resulted in a crash. INVGEN-71682 |
| Resolved a section view issue which caused a crash. INVGEN-71762 |
| Improved stability in Design Assistant when using Copy Design Properties. INVGEN-71877 |
| Resolved an issue where the installed path string length caused a crash on startup. INVGEN-71904 |
| Resolved an issue causing a crash that occurred when creating a drawing with a large number of zones. INVGEN-72699 |
| Resolved an issue causing an incorrect message dialog about a file loaded into cache being different than the file on disk to display. INVGEN-72927 |
| Improved stability when using linked files with parameters. INVGEN-73264 |
| Resolved an issue where the "IMPORTOPTIONS" argument in Inventor desktop shortcut doesn't work for path of Content Center libraries. INVGEN-73500 |
| Improved stability in Sheet Metal when using the Look At Face command. INVGEN-74156 |
| Improved stability when using a 3D Connexion device. INVGEN-74225 |
| Improved performance when multiple files were dragged to the Design Assistant. INVGEN-75178 |
| Improved stability after editing an existing shaft. INVGEN-75755 |
| Platform - API |
|---|
| Implemented Parameter.Dependents for PartFeature and Sketch objects. INVGEN-64483 |
| Resolved inconsistency between "ReferenceMissing" and "ReferencedFileDescriptor.ReferenceMissing" properties of the "ReferencedDocumentDescriptor" object. INVGEN-68921 |
| Resolved an issue where certain events weren't firing when selecting an extruded face. INVGEN-70037 |
| Improved stability when an invalid argument is provided. INVGEN-70130 |
| Improved stability after uninstalling add-ins. INVGEN-70606 |
| Platform - Graphics |
|---|
| Resolved an export image issue when anti-alias is enabled. INVGEN-72073 |
| Presentations |
|---|
| Resolved an issue in the Storyboard panel where it wasn't possible to extend the time of a tweak by dragging. INVGEN-67798 |
| Resolved an issue where the Presentation file didn't update when suppressing or adding components to an assembly. INVGEN-67971 |
| Resolved an issue where the iLogic rule returns an incorrect presentation snapshot view and the top scene component names. INVGEN-68964 |
| Resolved a 3D annotations visibility issue in Presentation files when suppressing component in the reference assembly. INVGEN-71734 |
| Resolved an issue about where it was not possible to delete the snapshot view from the presentation file. INVGEN-73703 |
| Corrected the UCS position of the Tweak Component for custom presentation data. INVGEN-74546 |
| Shared View |
|---|
| Resolved an issue preventing Shared View > Copy Link from getting a shortened URL. INVGEN-71201 |
| Translators |
|---|
| Resolved an issue where it wasn't possible to save an imported STEP file containing invalid characters in the file path. INVGEN-69341 |
| Resolved an issue where Inventor won't start when metric units are used. INVGEN-69404 |
| Resolved an issue where part containing square hole rectangular patterns couldn't be exported to the RFA file. INVGEN-69495 |
| Resolved an issue causing file corruption by blocking drag/drop of an associatively referenced component into a sub-assembly. INVGEN-70126 |
| Improved stability when opening the STP file. INVGEN-70213 |
| Resolved a zoom issue in the initial and thumbnail views. INVGEN-70214 |
| Resolved an issue where importing certain bad obj files caused a crash. INVGEN-71741 |
| Improved stability after opening a STEP file with Referenced Model. INVGEN-71753 |
| Resolved an issue with incorrect properties in the exported JT file. INVGEN-72809 |
| Improved stability when saving a STEP file. INVGEN-74272 |
| Translators - DWF |
|---|
| Resolved an issue that resulted in a crash when using the API to export to dwf. INVGEN-69018 |
| Improved stability when generating DWF from Vault during Save. INVGEN-70150 |
| Resolved an issue with scanned data and dwfx output that resulted in a crash. INVGEN-72966 |
| Translators - DWG-DXF |
|---|
| Resolved an issue with missing textures in drawings after exporting the AutoCAD files. INVGEN-5176 |
| Resolved an issue with the corrupted DWG file after using the "Export to DWG" option. INVGEN-66829 |
| Improved stability when importing a DWG file in Windows 11. INVGEN-68936 |
| Improved stability when importing an attached DWG into a 3D part. INVGEN-69058 |
| Translators - IFC |
|---|
| Resolved an issue with missing elements in Inventor model after converting to the IFC file. INVGEN-69493 |
| Translators - Revit |
|---|
| Resolved an issue with missing objects when exporting to Revit. INVGEN-65007 |
| Resolved an issue where slanted cylinders exported as an .rfa file displayed as surfaces (this will require updating Revit Core Engine to 2023.1.3+ or 2024.1.1+, which will be released at a later date (waiting to hear back from Gerry Huot to confirm date)). INVGEN-68826 |
| UI |
|---|
| Corrected the tooltip typo for Translucency in Material Browser. INVGEN-49468 |
| Resolved an issue where items added to the quick access toolbar aren't retained. INVGEN-61643 |
| Customized Ribbon settings are now preserved and imported correctly. INVGEN-64374 |
| Associated the marking menu font with the Inventor Application Options > General tab > Font. INVGEN-67559 |
| Improved stability after using the Publish DWF command. INVGEN-67708 |
| Improved stability when using the document menu to arrange the windows when multiple files are opened. INVGEN-69432 |
| Improved stability when opening a large STP file. INVGEN-69554 |
| Resolved an issue with missing Options in the Save As dialog in Inventor 2023 and Inventor 2024. INVGEN-70075 |
| Resolved a crash that occurred when using Reset UI Layout. INVGEN-70527 |
| Resolved a crash that occurred when using the Check in Tree with a Shared Project. INVGEN-70626 |
| Improved stability when using a marking menu with icons only. INVGEN-71591 |
| Resolved an issue where Send to DWF isn't detecting Outlook correctly. INVGEN-72059 |
| UI - Browser |
|---|
| Resolved an issue with an incorrect size of the undocked model browser panel. INVGEN-66898 |
| Resolved an issue where a iLogic was removed from the Browser view list. INVGEN-68850 |
| Resolved an issue where a position of sketch in the browser was not indicated when editing sheet metal parts. INVGEN-69396 |
| Improved stability when reordering features in the Model Browser. INVGEN-74099 |
| UI - Framework |
|---|
| Resolved a document switching behavior where switching from one normal document to Stress Analysis Parametric Table document affected the document window layout. INVGEN-67398 |
| Improved stability when clicking the OK button. INVGEN-69497 |
| Resolved an issue with disappearing Content Center window when moved to the second monitor. INVGEN-73072 |
| UI - Marking Menu |
|---|
| Resolved an issue preventing screen-capture of Inventor menus after turning off the Marking Menu. INVGEN-40970 |