2025.1 Update
July-2024
| Add-Ins - 3D PDF |
|---|
| Resolved issue where assembly sketch could not be exported to the 3D PDF. INVGEN-27856 |
| Add-Ins - BIM Translator |
|---|
| It is now possible to delete Revit Category folders from RVT files imported as a Convert model. INVGEN-76106 |
| Add-Ins - Cable and Harness |
|---|
| Resolved issue the Create Route command no longer hangs on certain datasets. INVGEN-75978 |
| Resolved issue the "Place Connector Views" workflow for copied assemblies was fixed. INVGEN-77513 |
| Add-Ins - Content Center |
|---|
| Resolved issue with Content Center editor: It now prevents the creation of a family if the folder name includes a "dot". INVGEN-74526 |
| Resolved issue with cell colors: For expression columns, the values are now displayed in blue; for other columns, they are displayed in black. INVGEN-74895 |
| It is now possible to create instances from the Content Center, even when there is a space character in the family table column name. INVGEN-75067 |
| Resolved issue in the Content Center library migration process. INVGEN-76244 |
| Improved stability during the placement of Content Center components into assemblies. INVGEN-76706 |
| Resolved issue in the Content Center library migration process. INVGEN-76899 |
| Add-Ins - Design Accelerator |
|---|
| Improved the bolted connection's prediction of the correct direction of the hole. INVGEN-75628 |
| Resolved issue with spline calculation for ISO 4156 (MRimax, MRimin). INVGEN-76533 |
| Made it possible to change the Structure option when switching from Autodrop. INVGEN-76740 |
| Bolted Connection (BC) started to maintain the selection from Autodrop. INVGEN-76741 |
| Initiated bolted connections with settings defined in Autodrop. INVGEN-76805 |
| Add-Ins - ESKD |
|---|
| Improved stability when editing the text. INVGEN-77324 |
| Add-Ins - Frame Generator |
|---|
| Improved the layout of the Frame Generator naming dialog on 4K monitors. INVGEN-43828 |
| Resolved issue where the preview was not adjusting in the Frame Generator when the size was changed. INVGEN-76292 |
| Improved stability when a mirrored 3D sketch was selected from the Model Tree using the Insert Frame option, or when hovering over all lines in a 3D sketch. INVGEN-76571 |
| Add-Ins - Simulation - Stress Analysis |
|---|
| Resolved issue with the responsiveness of the Cancel button in Mesh, Automatic Contacts, and Simulate progress bar dialogs. INVGEN-72376 |
| Resolved issue in Stress Analysis where, in some cases, the glyph displayed as a flat dot instead of an arrow. INVGEN-74689 |
| Improved stability during the generation of FEA reports exported from DS. INVGEN-75514 |
| Resolved issue where in some instances, results were not available after duplicating a study and re-running the simulation. INVGEN-77864 |
| Add-Ins - Task Scheduler |
|---|
| Resolved issue where an error was generated when updating the file using the task scheduler. INVGEN-75182 |
| Resolved issue where the Bill of Materials (BOM) was cleared from an assembly item after migrating the assembly through the task scheduler. INVGEN-76035 |
| Add-Ins - Tube and Pipe |
|---|
| Improved stability and robustness of Tube and Pipe routing. INVGEN-77218 |
| Resolved issue with naming of browser occurrence names when custom elbow styles were used on Tube and Pipe routes. INVGEN-77571 |
| Add-Ins - iCopy |
|---|
| Resolved issue where iCopy did not update when parameters changed. INVGEN-75137 |
| Add-Ins - iLogic |
|---|
| Improved stability where iLogic code would cause Inventor to stop working if the Vault client was loaded. INVGEN-62528 |
| Improved functionality of the iLogic Feature.SetThread when an empty string is specified for the thread class. INVGEN-71797 |
| Resolved issue where the iLogic Component object couldn't be used in a rule that runs out-of-process in a Vault project. INVGEN-74802 |
| Resolved issue where entity assignment couldn't be completed when capturing with Constraints.Add from ModelState assembly. INVGEN-75525 |
| Resolved issue where ilogic SetActiveStyle was not failing with an invalid style name. INVGEN-76108 |
| Resolved issue that allowed the top category in Custom Snippets to be renamed. INVGEN-77030 |
| Restored the calculation accuracy with angle parameter values in Inventor 2024 and earlier versions. INVGEN-77684 |
| AnyCAD - Revit |
|---|
| Improved stability when an RVT file was placed into an assembly from Autodesk Docs, which was uploaded through the Desktop Connector. INVGEN-76324 |
| Assemblies |
|---|
| Improved stability when hovering over Engineers Notebook. INVGEN-75876 |
| Improved stability during the handling of large assemblies. INVGEN-76321 |
| Improved stability when opening the assembly. INVGEN-77728 |
| Assemblies - Constraints-Joint-Assemble |
|---|
| Resolved issue where the direction of the Insert Constraint was inconsistent. INVGEN-72943 |
| Resolved issue where the constraint type would flip between Mate and Flush, depending on the selected faces. INVGEN-77638 |
| Resolved issue that prevented shortcut keys from functioning during ALT+drag workflows. INVGEN-77867 |
| Assemblies - Mirror-Copy-Replace |
|---|
| Resolved issue where renaming the file name within the Mirror/Copy Component dialog could cause Inventor to stop working. INVGEN-76935 |
| Assemblies - Pattern |
|---|
| Resolved issue where the relationship status of patterned components was incorrectly displayed. INVGEN-76918 |
| Assemblies - Properties |
|---|
| Resolved issue of assembly file opening being affected when an invisible component enabled 'Update Mass'. INVGEN-76015 |
| Assemblies - Rep Position |
|---|
| Resolved issue concerning the width of the Positional Representation drop-down list in the Override dialog box. INVGEN-76077 |
| Assemblies - Tools |
|---|
| Resolved issue where unresolved component could cause unexpected termination of application during Analyze Interference. INVGEN-76860 |
| Improved the Analyze Interference feature to correctly report component names when two components occupy exactly the same space. INVGEN-77484 |
| Assemblies - Update-Rebuild |
|---|
| Resolved issue where sub-assemblies still required updates when opened from the main assembly. INVGEN-75380 |
| Improved stability when rebuilding the assembly. INVGEN-77192 |
| Assemblies - Weldments |
|---|
| Resolved issue where certain display settings affected the color of Cosmetic welds. INVGEN-75046 |
| Design Views |
|---|
| Resolved issue where the Home view setting in the View Cube was not retained after saving and reopening. INVGEN-52178 |
| Drawings |
|---|
| Resolved issue with high RAM usage after opening drawing. INVGEN-76214 |
| Drawings - Annotations |
|---|
| Resolved issue where entering a Surface Texture Symbol with active Hiragana caused the Majority symbol to collect the symbol twice. INVGEN-72113 |
| Resolved issue for displaying of Contour symbol for Square Groove Weld (JIS). INVGEN-75327 |
| Resolved issue where existing annotations in the drawing were not updated after changing units for Mass. INVGEN-75342 |
| Resolved issue when after suppressing of the feature, existing Surface Texture Symbol, from the Majority symbol, has not been removed. INVGEN-75706 |
| Resolved issue where adding chain dimensions to base dimension was not working correctly. INVGEN-76137 |
| Resolved issue where the drawing chain command was not working properly with the [ENTER] key. INVGEN-76948 |
| Resolved issue where ordinate dimensions were resetting to zero when the origin was moved. INVGEN-77569 |
| Resolved issue where ESC key could cause Inventor to stop working while inserting sketch symbol, INVGEN-77987 |
| Resolved issue where parts list properties were losing association after saving the drawing. INVGEN-78305 |
| Improved stability where updates to the Bill of Materials (BOM) would permanently cause the sheet to be out of date due to parts list properties. INVGEN-78308 |
| Drawings - Annotations - Balloon |
|---|
| Resolved issue where a balloon cannot be attached to the view of the helix. INVGEN-54152 |
| Drawings - Annotations - Text |
|---|
| Resolved issue that prevented the text parameter from automatically updating the dynamic text width. INVGEN-76566 |
| Resolved issues involving the storage of text format in presets related to regional settings. INVGEN-77243 |
| Improved stability when presetting for leader text related to Regional settings. INVGEN-78481 |
| Drawings - Print-Plot |
|---|
| Resolved issue where the Multi-Sheet Plot (MSP) was displayed in the wrong position during sheet print preview. INVGEN-74570 |
| Drawings - Sketch |
|---|
| Improved stability when editing the pattern. INVGEN-78043 |
| Drawings - Styles |
|---|
| Resolved issue where changing Tolerance text style was not handled by Style Library update correctly. INVGEN-77180 |
| Resolved issue where the Object Defaults from the Style library, have not be correctly saved by Save Styles to Style Library command. INVGEN-77355 |
| Resolved issue where it was not possible to permanently save the sorting by ITEM in the parts list style. INVGEN-77654 |
| Resolved issue where style libraries were not updating saved settings when set to Read-write. INVGEN-77904 |
| Drawings - Tables |
|---|
| Resolved issue where the table header was not visible if the first row had its visibility turned off and was followed by a merged region. INVGEN-77017 |
| Resolved issue where the table heading, located at the bottom of the table, became invisible when the table had no visible rows. INVGEN-77847 |
| Drawings - True Connect |
|---|
| Improved stability when change sheet and save the dwg INVGEN-75718 |
| Resolved issue of the "DB Synch" flag appearing when using the AutoCAD 2000 file format. INVGEN-75973 |
| Drawings - Views |
|---|
| Improved performance when placing the first view of a model. INVGEN-75671 |
| Resolved issue where section views could not be created on a body with a deleted face. INVGEN-76248 |
| Resolved issue where Interference lines were shown. INVGEN-77025 |
| Resolved issue where Automated Centerline command could cause the application could to quit unexpectedly. INVGEN-78049 |
| Electro-Mechanical |
|---|
| Resolved issue where the electromechanical link was broken after a harness component was renamed. INVGEN-76200 |
| Resolved issue where the harness length was broken in a copied assembly with an electromechanical link. INVGEN-76205 |
| InvConnect |
|---|
| Improved stability during the creation of new shared views with large assembly data. INVGEN-75542 |
| Resolved issue where a shared view could not be created when access to www.gstatic.com was blocked. INVGEN-76282 |
| Model States |
|---|
| Resolved issue where the part number was incorrectly retrieved from a model state iProperty. INVGEN-61322 |
| Resolved issue where there was a difference in the display of overwritten name with the selected model state. INVGEN-65990 |
| Resolved issue where the Edit option was missing in the constraint context menu after a component was replaced. INVGEN-68209 |
| Resolved issue where Inventor was persistently requesting an update, indicated by a lightning symbol, even after the file had been saved. INVGEN-69794 |
| Resolved issue where the full filename of FileDescriptor was incorrect when using Save Copy As. INVGEN-74858 |
| Resolved issue where the "Update Mass" button remained enabled after clicking, and mass properties were not stored. INVGEN-76365 |
| Resolved issue where deleted components in sub-assemblies were causing prompts for unresolved components. INVGEN-76619 |
| Resolved issue of a "bad allocation" message appearing when creating a sketch of a specific assembly component using in-place editing. INVGEN-77073 |
| Resolved issue where the joint/constraint column in the model state table was not recognized in different language versions of Inventor. INVGEN-77146 |
| Model States - API |
|---|
| Resolved issue where the factory was opened in a model state but the ActiveModelState property was different. INVGEN-67630 |
| Resolved issue where the iAssembly member file was not being created when the ModelingEvents.OnGenerateMember event was called. INVGEN-74288 |
| Parameters |
|---|
| Resolved issue where derived parameters could be renamed in an unnecessary manner. INVGEN-73227 |
| Resolved issue where a number was added to the parameter name when linking parameters. INVGEN-75154 |
| Resolved issue where the error message "A cyclical constraint dependency was detected" was appearing when creating a new 3D model from a sketch in an ipt file, particularly when using a text parameter. INVGEN-76609 |
| Parts |
|---|
| Improved stability where there was an error RTTI when updating the specific customer dataset. INVGEN-75866 |
| Improved stability while interacting with Notes in the Model Tree of a corrupted document. INVGEN-76982 |
| Parts - 2D Sketch |
|---|
| Resolved issue where the Pattern command, in the distance input "Select Feature Dimension," was prepending value, leading to errors. INVGEN-63143 |
| Resolved issue with the API-created Arc2d by adding the CreateArc2dByThreePoints2 method and retiring the CreateArc2dByThreePoints method. INVGEN-70671 |
| Resolved issue that involved moving a dependent browser note above its parent node. INVGEN-76184 |
| Improved stability during sketch editing. INVGEN-76628 |
| Improved stability during the trimming of sketch blocks. INVGEN-76836 |
| Improved stability while opening legacy assembly files with sketch patterns. INVGEN-76932 |
| Parts - 3D Sketch |
|---|
| Improved stability when projecting a sketch onto surface. INVGEN-75845 |
| Improved stability by enhancing the extension of 3D sketches. INVGEN-76764 |
| Parts - Combine-Sculpt-Split |
|---|
| Resolved issue of instability that could occur when splitting the part. INVGEN-77556 |
| Parts - Derive |
|---|
| Improved performance when large derived parts were selected up to 10 times. INVGEN-76139 |
| Improved stability when updating the derived part. INVGEN-77340 |
| Parts - Direct Edit |
|---|
| Improved stability during the process of editing the body. INVGEN-70338 |
| Improved stability during the process of editing the Direct Edit feature. INVGEN-76912 |
| Parts - Extrude-Revolve-Sweep-Coil |
|---|
| Improved stability when deleting the Revolution feature. INVGEN-76937 |
| Parts - Fillet-Chamfer |
|---|
| Resolved issue where the Mass physical properties for certain fillet features were not properly updated after using the Rebuild All command. INVGEN-75593 |
| Parts - Finish Feature |
|---|
| Resolved issue where the Finish feature was disappearing in the rendered image in Inventor Studio. INVGEN-70720 |
| Parts - Mirror-Pattern |
|---|
| Resolved issue where the Sketch Driven Pattern became invisible in a drawing when the pattern was suppressed in a model state. INVGEN-69105 |
| Parts - Properties |
|---|
| Resolved issue with incorrect custom iProperties values. INVGEN-75215 |
| Parts - Sheet Metal |
|---|
| Resolved issue with the project flat pattern being incorrect. INVGEN-36247 |
| Improved placement of the sketch representation for punches when patterning multiple punch features. INVGEN-70327 |
| Resolved issue where the API to retrieve flat pattern data was not functioning properly. INVGEN-75911 |
| Improved stability where Inventor was unstable when marking the sketch on a radial surface of the part. INVGEN-77493 |
| Improved stability when using shortcut key of Face command in the disabled environment. INVGEN-78704 |
| Parts - iFeature-iPart |
|---|
| Resolved issue where 'Detected potentially damaging errors in the table' message prompted when a new row was inserted in the iFeature Author table. INVGEN-76238 |
| Improved stability when opening an .ide file to edit the iFeature author table. INVGEN-77778 |
| Platform |
|---|
| Improved stability when using the Joint feature in an assembly. INVGEN-76942 |
| Improved stability during the sheet metal sketching workflow. INVGEN-76986 |
| Improved stability when using Migrate Settings. INVGEN-77741 |
| Platform - API |
|---|
| Resolved issue where FileManager.IsInventorComponent unexpectedly returned 'True' when the input was not a valid full file path. INVGEN-38943 |
| Improved stability when utilizing iLogic rules with the Vault add-in activated. INVGEN-68541 |
| Resolved issue where restriction of occurrence selections did not extend to window selections. Introduced a new RestrictWindowSelectionToOccurrence property for SelectEvents to fix this. INVGEN-74034 |
| Resolved issue where no error was returned when a failure occurred while saving a document via iLogic or the API. INVGEN-75630 |
| Resolved issue that prevented the Batch Style Updater user tool from continuing to update files when it encountered a file that could not be updated. INVGEN-77135 |
| Resolved issue of file extension truncation for customized FileMetadata.FileName within the OnPopulateFileMetadata event during the Save As operation. INVGEN-77335 |
| Resolved issue where the iLogic Measure.Extents functions were including entity name graphics. INVGEN-77479 |
| Platform - API - Drawing |
|---|
| Improved performance when opening or editing the Parts List dialog. INVGEN-75902 |
| Platform - Framework |
|---|
| Resolved issue where the iLogic Log panel wasn't consistently remembered upon restarting Inventor. INVGEN-75172 |
| Resolved issue that caused the Style Library Manager not to run if Inventor 2025 was not the last product run. INVGEN-77127 |
| Resolved issue where not all settings from an XML in the Preferences folder were imported correctly. INVGEN-77409 |
| Platform - Graphics |
|---|
| Resolved issue where the lighting style Combo box was not updated when set by Application Programming Interface (API). INVGEN-65987 |
| Resolved issue where Zebra analysis was incorrectly displayed. INVGEN-77098 |
| Improved stability when switching visuals under Express mode. INVGEN-78082 |
| Platform - Graphics - Drawing |
|---|
| Resolved issue of stability enhancement while updating the drawing file post assembly rebuild. INVGEN-76061 |
| Resolved issue that caused an underline to be displayed in dimensions. INVGEN-77029 |
| Platform - Graphics - Face-Edge-Vertex-Silhouette |
|---|
| Resolved issue where shaded with edges view were incorrectly displayed under draft analysis. INVGEN-74755 |
| Platform - Naming and Matching |
|---|
| Improved stability when updating derived sheet metal part. INVGEN-75794 |
| Platform - OEM |
|---|
| Resolved issue where it was not possible to copy/cut and paste between AutoCAD OEM, Inventor, and Inventor OEM. INVGEN-76203 |
| Translators |
|---|
| Resolved issue when UCS could not be imported during importing STP file. INVGEN-62361 |
| Resolved issue where colors defined in the assembly were not displayed in the STEP export. INVGEN-69559 |
| Improved stability in the exportation of SAT files. INVGEN-73490 |
| Improved stability when saving OBJ file with certain settings. INVGEN-74842 |
| Resolved issue where a missing reference was created to the AnyCAD file when its placement into an assembly was canceled using the escape key. INVGEN-75813 |
| Improved stability during STEP export with certain imported obj files. INVGEN-75825 |
| Resolved issue where a prefix or suffix was not applied when the Enter key was used for various import dialogs. INVGEN-76009 |
| Resolved issue where an additional 3D Sketch was created upon opening a STEP file. INVGEN-76842 |
| Resolved issue that caused incorrect visibility in exported STP files. INVGEN-77216 |
| Improved stability when exporting to JT versions older than 9.0. INVGEN-77661 |
| Translators - DWG-DXF |
|---|
| Resolved issue where a DWG exported from Inventor displayed incorrect dimensions when opened in AutoCAD. INVGEN-75414 |
| Resolved issue where the displayed value of a dimension was incorrect in DXF exports. INVGEN-76492 |
| Resolved issue where Inventor displayed layers during the import of Autocad DWG files. INVGEN-77603 |
| Resolved issue where the layer map was not applied during dwg export through Inventor server 2023. INVGEN-78014 |
| Translators - PDF |
|---|
| Improved stability when importing to PDF. INVGEN-77028 |
| Translators - Revit |
|---|
| Resolved issue of RFA files not being exportable in offline mode for Inventor 2023. INVGEN-74000 |
| UI |
|---|
| Resolved issue where the ViewCube was not properly displayed when a Document window was redocked to the Inventor session. INVGEN-72870 |
| UI - Browser |
|---|
| Improved stability when selecting a sketch in a part file. INVGEN-75729 |
| Resolved issue where the Model Browser would scroll to the top when an item was selected and the ESC key was hit. INVGEN-77241 |
| Resolved issue where the GetBrowserNodeFromObject API was causing file corruption in certain situations. INVGEN-78220 |
| UI - Framework |
|---|
| Resolved issue where the API incorrectly added a flat pattern tab to the top assembly when calling the Unfold method for inactive sheet metal parts. INVGEN-72690 |