2025.2 Update
November-2024
| Add-Ins - 3D Annotations |
|---|
| Resolved issue where edit via General Surface Profile Tolerance browser node, could cause unexpected Inventor termination. INVGEN-79240 |
| Resolved issue where the application could terminate unexpectedly while creating a 3D annotation. INVGEN-80213 |
| Add-Ins - Cable and Harness |
|---|
| Resolved issue by adding missing Yellow Green bmp texture for striped wire style to Inventor setup. This ensured the striped style worked out of the box. INVGEN-78216 |
| Resolved issue where Appearance style editor synchronized styles to harness part (wires, etc.). INVGEN-78216 |
| Add-Ins - Frame Generator |
|---|
| Resolved issue with the stability of the frame generator end treatments INVGEN-74747 |
| Add-Ins - Tube and Pipe |
|---|
| Improved stability within the Tube and Pipe add-in when exporting styles. INVGEN-80827 |
| Add-Ins - iLogic |
|---|
| Resolved issue that allowed the creation of an iLogic rule in a substitute model state in an assembly under certain conditions. The fix disabled the Add Rule command. INVGEN-66853 |
| Resolved issue where an iLogic form was not disabled in this particular workflow. INVGEN-74217 |
| Resolved issue where the iLogic API function GetNamedEntities did not work for entities that belonged to suppressed features. INVGEN-77338 |
| AnyCAD - Revit |
|---|
| Resolved issue where an error occurred when opening some RVT files. INVGEN-74216 |
| Resolved issue where Inventor abruptly closed upon trying to open specific unresolved files. Now, an error message displays, describing which file could not be resolved. INVGEN-77156 |
| Assemblies |
|---|
| Resolved issue where the drawing showed the model needed an update even though the assembly was up to date. INVGEN-70107 |
| Improved stability when opening certain assembly files. INVGEN-78904 |
| Assemblies - BOM |
|---|
| Resolved issue where BOMrow.TotalQuantity returned a period as the decimal symbol when the region was set to Italy. INVGEN-77698 |
| Resolved issue where the Filename column in the Bill of Materials Model Tab maintained its value across updates. INVGEN-78471 |
| Assemblies - Constraints-Joint-Assemble |
|---|
| Resolved issue where prompts for Design Doctor did not work. INVGEN-72575 |
| Assemblies - Weldments |
|---|
| Resolved issue where the Weld Symbol Visibility option became disabled when the weld bead visibility was disabled. INVGEN-79715 |
| Drawings - Annotations |
|---|
| Resolved issue where the API method BendNote.BendEdge failed after flipping the flat pattern. INVGEN-77309 |
| Resolved issue when Arc Length dimensions were curved. INVGEN-79155 |
| Resolved issue where deleting a member from the ordinate set dimension could leave a gap on the extension line. INVGEN-79623 |
| Drawings - Sketch |
|---|
| Resolved issue where the sketch pattern did not allow the use of parameters. INVGEN-79722 |
| Drawings - Styles |
|---|
| Resolved issue when the Korean font was set incorrectly in the Edit Hole Note dialog by adding text using direct input. INVGEN-77462 |
| Resolved issue when the Japanese font was set incorrectly in the Edit Hole Note dialog by adding text using direct input. INVGEN-78473 |
| Resolved issue where Save in document, within the Styles Editor dialog, could cause unexpected Inventor termination. INVGEN-79897 |
| Drawings - Tables |
|---|
| Improved stability when right-clicking on the Parts List row of a part drawing that includes a projected, auxiliary, section, detail, or overlay view. INVGEN-79425 |
| Drawings - Views |
|---|
| Resolved issue where the position of the tweak lines was incorrect after the view was cropped. INVGEN-79134 |
| Measure |
|---|
| Improved stability when running the measure command with a specified machine setting. INVGEN-79643 |
| Model States |
|---|
| Resolved issue where deleted components in sub-assemblies were causing prompts for unresolved components. INVGEN-76619 |
| Improved performance when updating mass properties with a large model state table. INVGEN-79677 |
| Parts |
|---|
| Improved stability by resolving the issue where Inventor previously crashed when dragging the EOP to the end INVGEN-79073 |
| Parts - 2D Sketch |
|---|
| Improved stability when rotating an image in the Sketch environment. INVGEN-80748 |
| Parts - 2D Sketch - Projection |
|---|
| Resolved issue by correctly handling non-associative cross part projections. INVGEN-67682 |
| Parts - iFeature-iPart |
|---|
| Resolved issue where a warning appeared when the iPart column count exceeded 700 columns. INVGEN-79851 |
| Parts - Sheet Metal |
|---|
| Resolved issue where the direction of the third face was wrongly reversed during creation. INVGEN-79200 |
| Resolved issue of inability to select dimension from unconsumed sketch for Flange using the Select Feature Dimension command. INVGEN-79528 |
| Improved stability when creating a Flange in an in-place edit part. INVGEN-80556 |
| Platform |
|---|
| Resolved issue by adding support for Sensitivity Labels with Microsoft Excel workflows. It required setting a Windows Environment variable of UseLibXL=false to disable some libraries that did not work with the Sensitivity Labels. INVGEN-77274 |
| Resolved issue where an ordinal error displayed and prevented the creation of a new PackAndGoComponent. INVGEN-79836 |
| Improved stability when editing a driven constraint. INVGEN-80104 |
| Improved stability when publishing a drawing to DWF. INVGEN-80107 |
| Improved stability when saving a file to a network location. INVGEN-80111 |
| Improved stability when using the Measure command. INVGEN-80116 |
| Improved stability when exporting a BOM to Excel. INVGEN-80135 |
| Improved stability when updating drawing views. INVGEN-80136 |
| Improved stability when editing constraints. INVGEN-80138 |
| Improved stability when saving a drawing. INVGEN-80312 |
| Improved stability when exporting to an AutoCAD drawing. INVGEN-80501 |
| Improved stability when using the Isolate command in an assembly. INVGEN-80502 |
| Improved stability when using Pack and Go. INVGEN-80597 |
| Improved stability when creating a pipe run. INVGEN-80602 |
| Improved stability when working with a camera in the Studio environment. INVGEN-80724 |
| Platform - API |
|---|
| Improved stability by resolving a performance issue with Vault projects when placing files into an assembly. INVGEN-76988 |
| Platform - Framework |
|---|
| Resolved issue where Prompt settings were not imported using the /importoptions command line switch. INVGEN-77285 |
| Improved stability when opening multiple files with Design Assistant from Windows Explorer. INVGEN-78951 |
| Resolved issue where the File Status panel was restored after restarting Inventor. INVGEN-79229 |
| Resolved issue where an empty warning dialog appeared when selecting a ZIP file. INVGEN-79483 |
| Platform - Graphics |
|---|
| Resolved issue where the Sketch opacity application option did not work. INVGEN-78025 |
| Resolved issue where there was no highlight and selection effect for invisible bodies. INVGEN-79711 |
| Platform - Graphics - Section View-Decal-Thread |
|---|
| Resolved issue where the 'Section View already exists in the current design view' dialog could not be suppressed in the Application Options dialog. INVGEN-80092 |
| UI |
|---|
| Resolved issue where the mini toolbar did not display near the cursor on a second monitor. INVGEN-77458 |
| Resolved issue where "Save Copy As" and "Export CAD Format" did not use the previously used file path and name. INVGEN-79673 |
| UI - Framework |
|---|
| Resolved issue where values were not picked up correctly when entered too quickly. INVGEN-77255 |