2025.3 Update
April-2025
| Add-Ins - Cable and Harness |
|---|
| Resolved an issue with the ability to create a harness in an existing model. INVGEN-82798 |
| Add-Ins - Design Accelerator |
|---|
| Resolved issue where the bolted connection drill hole passed through both components, including cases where the termination component had a cut out face. INVGEN-81070 |
| Add-Ins - Frame Generator |
|---|
| Improved stability in Frame Generator when a particular frame was edited INVGEN-81334 |
| Add-Ins - Simulation - Dynamic Simulation |
|---|
| Improved stability in Dynamic Simulation. Resolved issue with exporting to FEA. INVGEN-81429 |
| Add-Ins - Task Scheduler |
|---|
| Resolved issue where the "Skip Files with Unresolved References" setting in Task Scheduler was being ignored. INVGEN-78480 |
| Add-Ins - Tube and Pipe |
|---|
| Improved stability after disabling the Cable and Harness add-in. INVGEN-71265 |
| Resolved issue when publishing parts of 1/8 inch nominal size. INVGEN-77900 |
| Improved stability and robustness. INVGEN-79009 |
| Stability and robustness of tube and pipe. INVGEN-80751 |
| Assemblies |
|---|
| Resolved issue where the user received a read-only error for an assembly and was unable to edit it. INVGEN-83485 |
| Assemblies - Mirror-Copy-Replace |
|---|
| Resolved issue where constraints could fail after assembly mirroring. INVGEN-82157 |
| Assemblies - Weldments |
|---|
| Improved stability when editing weld bead features. INVGEN-82983 |
| Assemblies - Work Features |
|---|
| Resolved issue in the API regarding access to ToEntity and ToFace of a HoleFeature INVGEN-80122 |
| Drawings - Annotations |
|---|
| Resolved issue where centered pattern creation could cause disappearance of centerlines and dimensions. INVGEN-76786 |
| Resolved wrong offset of extension lines for chain dimension. INVGEN-79839 |
| Resolved an issue where the Sketch symbol with the leader could not positioned correctly with its insertion points.. INVGEN-80777 |
| Resolved issue with syncing preset for weld symbols. INVGEN-81338 |
| Resolved issue where title block in drawing was not updated after changing material in part. INVGEN-82367 |
| Resolved issue where Rebuild All removed the quantity note from the hole note attached to the punch tool. INVGEN-82505 |
| Resolved a problem with the quantity note for the derived part in the assembly. INVGEN-82829 |
| Resolved an issue where the update of a view caused an incorrect section view update. INVGEN-83222 |
| Drawings - Styles |
|---|
| Resolved issue where libraries were still available for saving after using Save to Library. INVGEN-78459 |
| Drawings - Tables |
|---|
| Resolved issue where drawing used as a template had wrong table content. INVGEN-76505 |
| Drawings - Text |
|---|
| Resolved issue where title block in drawing was not updated after changing material in part. INVGEN-82367 |
| Drawings - Views |
|---|
| Resolved an issue where the view section line changed position unexpectedly INVGEN-82064 |
| Resolved issue where the thread edge was not displayed for a tapped hole. INVGEN-83652 |
| Model States |
|---|
| Improve performance when accessing BOM with model states. INVGEN-81083 |
| Resolved issue where the component pattern of an iPart member was partially suppressed after changing the component in a model state and switching to another model state. INVGEN-83159 |
| Parts |
|---|
| Improved performance when editing pattern. INVGEN-80236 |
| Relationships command now lists work features which are not at the top level of the browser. INVGEN-81374 |
| Parts - Derive |
|---|
| Resolved issue where there were differences between Simplify Pocket range settings in the UI and API. INVGEN-77014 |
| Improved stability when undoing the derived part. INVGEN-78190 |
| Improved stability by resolving a performance issue for updating certain derived parts. INVGEN-81830 |
| Parts - Sheet Metal - Flange |
|---|
| Resolved issue where the cursor jumped to the HUD incorrectly when inputting values in the flange width. INVGEN-80889 |
| Improved stability when editing the sheet metal iPart. INVGEN-81599 |
| Platform |
|---|
| Improved stability when editing a Sketch INVGEN-81228 |
| Improved stability when placing a component in an assembly INVGEN-81275 |
| Improved stability when Rendering INVGEN-81298 |
| Improved stability when using the File Files dialog INVGEN-81729 |
| Improved stability when import application options INVGEN-81731 |
| Improved stability when projecting AutoCAD geometry in a Sketch INVGEN-81884 |
| Improved stability when dragging components between documents INVGEN-81936 |
| Improved stability when running Inventor on the Windows 11 24H2 operating system. INVGEN-83901 |
| Platform - API |
|---|
| Resolved issue where some files were not checked into the Vault when using the task scheduler. INVGEN-78664 |
| Platform - Framework |
|---|
| Resolved issue where ribbon customizations were not imported correctly from the command line using the importcustomizations switch. INVGEN-79949 |
| Platform - Inventor Server |
|---|
| Resolved issue with updating assemblies using Inventor Server. INVGEN-81983 |
| Translators |
|---|
| Improved performance when importing a STEP file. INVGEN-77514 |
| Improved stability by resolving an issue when importing certain PRT files. INVGEN-80898 |
| Translators - PDF |
|---|
| Resolved issue where a PDF with a higher DPI setting was very slow in the PDF Viewer. INVGEN-82178 |
| Translators - Revit |
|---|
| Resolved issue where the process could not access the file because it was being used by another process when exporting to RVT from Inventor. INVGEN-78243 |
| UI - Browser |
|---|
| Improved stability when using the search in the Model Browser INVGEN-77217 |