Share
Tolerance Advisor Messages
List and explanation of Tolerance Advisor browser messages.
Pages in this section
- Datum feature label has syntax errors
- Datum object is missing
- Datum reference string has syntax errors
- Datum type is unknown
- Dimension reference feature is not valid
- DRF failed
- DRF is invalid
- DRF is not referenced
- DRF may have poor repeatability
- DRF referenced is not valid
- DRF specification is incomplete
- Failed objects in the model
- Form is not fully constrained
- Form tolerance value must be smaller
- Gage size does not fall within the feature extents
- GCS is not valid for the feature/DRF combination
- Geometric tolerance has syntax errors
- Geometric tolerance is over-constraining
- Geometry references not valid
- Insufficient opposing region to be a feature of size
- Location not fully constrained
- Model contains external annotation elements
- Not all part DOF are constrained
- Orientation is not fully constrained
- Orientation of secondary datum is not allowed
- Orientation of tertiary datum is not allowed
- Pattern is not valid
- Primary datum feature may be too small
- Projected Tolerance Zone value must be greater than zero
- Referenced datum does not exist
- Referenced datum is not supported
- Should be set as a datum feature or reordered
- Size is not fully constrained
- System of units not compatible with tolerancing standard
- Target reference is missing
- Tolerance Feature and modeling occurrence count do not match
- Tolerance Feature Failed
- Tolerance feature shares faces
- Tolerance on subfeature must be smaller than related tolerance
- Tolerance specification is incomplete
- Tolerance value must be smaller than preceding value
- Unequally Disposed profile value not within valid range
- Unspecified tolerances for some dimensions
- Unsupported datum reference attributes
- User-specified unit basis tolerance
- Zero-value (or inconsistent) tolerance not allowed
- One or more surfaces are unconstrained
Parent page: About 3D Annotation and Model-Based Definition