Fixed Issues
| Add-Ins - 3D Annotations |
|---|
| Resolved issue where edit via General Surface Profile Tolerance browser node, could cause unexpected Inventor termination. INVGEN-79240 |
| Resolved issue where using preset during creating General Note 3D annotation may caused unexpected termination of Inventor. INVGEN-79697 |
| Resolved issue where the application could terminate unexpectedly while creating a 3D annotation. INVGEN-80213 |
| Add-Ins - 3D PDF |
|---|
| Resolved issue where assembly sketch could not be exported to the 3D PDF. INVGEN-27856 |
| Add-Ins - BIM Simplify |
|---|
| Improved performance of displaying the dialog for editing simplified assemblies. INVGEN-76123 |
| Add-Ins - BIM Translator |
|---|
| Resolved issue to allow deletion of Revit Category folders from RVT files imported as a Convert model. INVGEN-76106 |
| Add-Ins - Cable and Harness |
|---|
| Resolved issue with Cable & Harness: The "Place Connector Views" workflow for copied assemblies was fixed. INVGEN-77513 |
| Resolved issue by adding missing Yellow Green bmp texture for striped wire style to Inventor setup. This ensured the striped style worked out of the box. Resolved issue where Appearance style editor synchronized styles to harness part (wires, etc.). INVGEN-78216 |
| Add-Ins - Content Center |
|---|
| Resolved issue in Content Center 'SKF with Tapered Bore' ball bearing template. INVGEN-29193 |
| Resolved issue in cap nut model DIN 1587. INVGEN-60849 |
| Resolved issue with the heads of bolts ISO 7047 (Z), DIN EN ISO 7046-2 Pozidriv. INVGEN-70635 |
| Resolved issue with the UN EN 10219-2 Rectangular Hollow Section family table data. INVGEN-73195 |
| Resolved issue with Content Center editor: It now prevents the creation of a family if the folder name includes a "dot". INVGEN-74526 |
| Resolved issue with cell colors: For expression columns, the values are now displayed in blue; for other columns, they are displayed in black. INVGEN-74895 |
| Resolved issue in Washer DIN 7349 category parameters mapping. INVGEN-74926 |
| Resolved issue with the bad definition of axis iMate for DIN 571. INVGEN-76022 |
| Resolved issue in the family table of the PN-79/M-82018. INVGEN-76089 |
| Resolved issue in the Content Center library migration process. INVGEN-76244 |
| Resolved issue where Content Center families copied in one language had the same table data, such as PartNumber and FileName, in other languages. INVGEN-76504 |
| Improved stability during the placement of Content Center components into assemblies. INVGEN-76706 |
| Resolved issue in the Content Center library migration process. INVGEN-76899 |
| Resolved issue in the family table of the ANSI L (Unequal angles). INVGEN-77742 |
| Resolved issue where a user could not type a negative value in a custom column range dialog. INVGEN-79960 |
| Resolved issue in the range of frame length. INVGEN-79972 |
| Add-Ins - Design Accelerator |
|---|
| Resolved issue with the disc cam where it provided an incorrect shape while using a swinging arm and custom motion. INVGEN-66890 |
| Resolved issue where the Bolted Connection couldn't drill a hole for some custom Content Center beams or profiles. INVGEN-75268 |
| Made it possible to change the Structure option when switching from Autodrop. INVGEN-76740 |
| Initiated bolted connections with settings defined in AutoDrop. INVGEN-76805 |
| Resolved issue where the bolted connection drill hole passed through both components, including cases where the termination component had a cut out face. INVGEN-81070 |
| Resolved issue in tolerance analysis limits. Resolved issue with lower and upper diameters in hole and shaft features. INVGEN-81696 |
| Resolved issue with the incorrect Bolted Connection position. INVGEN-82114 |
| Improved stability in Linear Cam. INVGEN-82979 |
| Add-Ins - ESKD |
|---|
| Improved stability when editing the text. INVGEN-77324 |
| Add-Ins - Frame Generator |
|---|
| Improved the layout of the Frame Generator naming dialog on 4K monitors. INVGEN-43828 |
| Resolved issue with the stability of the frame generator end treatments. INVGEN-74747 |
| Improved stability when a mirrored 3D sketch was selected from the Model Tree using the Insert Frame option, or when hovering over all lines in a 3D sketch. INVGEN-76571 |
| Improved stability in Frame Generator when a particular frame was edited. INVGEN-81334 |
| Add-Ins - Simulation - Dynamic Simulation |
|---|
| Improved stability in Dynamic Simulation. Resolved issue with exporting to FEA. INVGEN-81429 |
| Add-Ins - Simulation - Stress Analysis |
|---|
| Resolved issue in Stress Analysis where, in some cases, the glyph displayed as a flat dot instead of an arrow. INVGEN-74689 |
| Add-Ins - Task Scheduler |
|---|
| Resolved issue where the Bill of Materials (BOM) was cleared from an assembly item after migrating the assembly through the task scheduler. INVGEN-76035 |
| Add-Ins - Tube and Pipe |
|---|
| Improved stability after disabling the Cable and Harness add-in. INVGEN-71265 |
| Resolved issue when publishing parts of 1/8 inch nominal size. INVGEN-77900 |
| Improved stability within the Tube and Pipe add-in when exporting styles. INVGEN-80827 |
| Resolved issue where using the "Replace All" option from the right-click menu on a specific part in the assembly environment did not work. INVGEN-81689 |
| Add-Ins - iLogic |
|---|
| Improved stability by resolving an issue where iLogic code would cause Inventor to stop working if the Vault client was loaded. INVGEN-62528 |
| Resolved issue that allowed the creation of an iLogic rule in a substitute model state in an assembly under certain conditions. The fix disabled the Add Rule command. INVGEN-66853 |
| Resolved issue where entity assignment couldn't be completed when capturing with Constraints.Add from ModelState assembly. INVGEN-75525 |
| Resolved issue that allowed the top category in Custom Snippets to be renamed. INVGEN-77030 |
| Resolved issue where the iLogic API function GetNamedEntities did not work for entities that belonged to suppressed features. INVGEN-77338 |
| AnyCAD - Revit |
|---|
| Resolved issue where an error occurred when opening some RVT files. INVGEN-74216 |
| Improved stability when an RVT file was placed into an assembly from Autodesk Docs, which was uploaded through the Desktop Connector. INVGEN-76324 |
| Assemblies |
|---|
| Improved stability when hovering over Engineers Notebook. INVGEN-75876 |
| Improved stability when opening the assembly. INVGEN-77728 |
| Improved stability when opening certain assembly files. INVGEN-78904 |
| Assemblies - BOM |
|---|
| Resolved issue where thumbnails in BOM exported to XLS file were incorrectly resized. INVGEN-69745 |
| Resolved issue where BOMrow.TotalQuantity returned a period as the decimal symbol when the region was set to Italy. INVGEN-77698 |
| Improved stability when reordering and sorting parts in the Bill of Materials. INVGEN-80994 |
| Assemblies - Constraints-Joint-Assemble |
|---|
| Resolved issue where the direction of the Insert Constraint was inconsistent. INVGEN-72943 |
| Resolved issue where the constraint type would flip between Mate and Flush, depending on the selected faces. INVGEN-77638 |
| Resolved issue that prevented shortcut keys from functioning during ALT+drag workflows. INVGEN-77867 |
| Assemblies - Mirror-Copy-Replace |
|---|
| Resolved issue where renaming of File name, within the Mirror/Copy Component dialog, could cause, that Inventor has stopped working. INVGEN-76935 |
| Assemblies - Properties |
|---|
| Resolved issue of assembly file opening being affected when an invisible component enabled 'Update Mass'. INVGEN-76015 |
| Assemblies - Rep Position |
|---|
| Resolved issue where the order of view representations was different in various environments. INVGEN-74545 |
| Assemblies - Tools |
|---|
| Improved the Analyze Interference feature to correctly report component names when two components occupy exactly the same space. INVGEN-77484 |
| Assemblies - Update-Rebuild |
|---|
| Resolved issue where sub-assemblies still required updates when opened from the main assembly. INVGEN-75380 |
| Assemblies - Weldments |
|---|
| Resolved issue where the Weld Symbol Visibility option became disabled when the weld bead visibility was disabled. INVGEN-79715 |
| Improved stability when editing weld bead features. INVGEN-82983 |
| Design Views |
|---|
| Resolved issue where visibility broke after replacing an invisible component. INVGEN-77454 |
| Drawings |
|---|
| Resolved issue with high RAM usage after opening drawing. INVGEN-76214 |
| Drawings - Annotations |
|---|
| Resolved issue with an incorrect count number for the hole note when used in a fold feature. INVGEN-62736 |
| Resolved issue where Linear Diameter was setting an incorrect value when selecting a line and point in an Inventor drawing. INVGEN-65925 |
| Improved behavior for Preserve Orphaned Annotations setting also for the part feature. INVGEN-72000 |
| Improved behavior for retrieve, where General Notes 3DA could be overlapped by border. INVGEN-76488 |
| Resolved issue where centered pattern creation could cause disappearance of centerlines and dimensions. INVGEN-76786 |
| Resolved issue where the API method BendNote.BendEdge failed after flipping the flat pattern. INVGEN-77309 |
| Resolved issue where ordinate dimensions were resetting to zero when the origin was moved. INVGEN-77569 |
| Resolved issue where ESC key could cause Inventor to stop working while inserting sketch symbol. INVGEN-77987 |
| Improved stability by resolving an issue where updates to the Bill of Materials (BOM) would permanently cause the sheet to be out of date due to parts list properties. INVGEN-78308 |
| Resolved issue where Retrieve Model Annotations command did not work correctly on Derive or Combine feature. INVGEN-79140 |
| Resolved issue when Arc Length dimensions were curved. INVGEN-79155 |
| Resolved issue where deleting a member from the ordinate set dimension could leave a gap on the extension line. INVGEN-79623 |
| Resolved wrong offset of extension lines for chain dimension. INVGEN-79839 |
| Resolved issue where the Sketch symbol with the leader could not positioned correctly with its insertion points. INVGEN-80777 |
| Resolved issue with syncing preset for weld symbols. INVGEN-81338 |
| Drawings - Annotations - Text |
|---|
| Resolved issue that prevented the text parameter from automatically updating the dynamic text width. INVGEN-76566 |
| Resolved issue involving the storage of text format in presets related to regional settings. INVGEN-77243 |
| Improved stability when presetting for leader text related to Regional settings. INVGEN-78481 |
| Resolved issue where title block in drawing was not updated after changing material in part. INVGEN-82367 |
| Drawings - DVTK |
|---|
| Improved performance when placing the first view of a model. INVGEN-75671 |
| Drawings - Sketch |
|---|
| Improved stability when editing the pattern. INVGEN-78043 |
| Resolved issue where the sketch pattern did not allow the use of parameters. INVGEN-79722 |
| Drawings - Styles |
|---|
| Resolved issue where changing Tolerance text style was not handled by Style Library update correctly. INVGEN-77180 |
| Resolved issue where the Object Defaults from the Style library, have not be correctly saved by Save Styles to Style Library command. INVGEN-77355 |
| Resolved issue when the Korean font was set incorrectly in the Edit Hole Note dialog by adding text using direct input. INVGEN-77462 |
| Resolved issue when the Japanese font was set incorrectly in the Edit Hole Note dialog by adding text using direct input. INVGEN-78473 |
| Resolved issue where Save in document, within the Styles Editor dialog, could cause unexpected Inventor termination. INVGEN-79897 |
| Drawings - Tables |
|---|
| Resolved issue where iProperties and custom properties changed in the model were not updated in the General Table - Model States drawing table. INVGEN-68220 |
| Resolved issue where drawing used as a template had wrong table content. INVGEN-76505 |
| Resolved issue where the table header was not visible if the first row had its visibility turned off and was followed by a merged region. INVGEN-77017 |
| Resolved issue where the table heading, located at the bottom of the table, became invisible when the table had no visible rows. INVGEN-77847 |
| Improved stability when right-clicking on the Parts List row of a part drawing that includes a projected, auxiliary, section, detail, or overlay view. INVGEN-79425 |
| Drawings - True Connect |
|---|
| Resolved issue of the "DB Synch" flag appearing when using the AutoCAD 2000 file format. INVGEN-75973 |
| Drawings - Views |
|---|
| Resolved issue where the position of view sketch was incorrect. INVGEN-52033 |
| Resolved issue where non-standard scale was used for detail views. INVGEN-70678 |
| Resolved issue where custom scale format was not used. INVGEN-71842 |
| Resolved issue where the section line could not be dragged to a new location. INVGEN-73846 |
| Resolved issue with drawing lines color not matching the color scheme when the model was updated. INVGEN-76265 |
| Resolved issue where Interference lines were shown. INVGEN-77025 |
| Resolved issue where Automated Centerline command could cause the application could to quit unexpectedly. INVGEN-78049 |
| Resolved issue where parts list properties were losing association after saving the drawing. INVGEN-78305 |
| Resolved issue where the position of the tweak lines was incorrect after the view was cropped. INVGEN-79134 |
| Resolved issue where the position of the view label was not constrained to the view border when created from a sheet format. INVGEN-81086 |
| Resolved issue where the view section line changed position unexpectedly. INVGEN-82064 |
| Measure |
|---|
| Improved stability when running the measure command with a specified machine setting. INVGEN-79643 |
| Model States |
|---|
| Resolved issue where the "Update Mass" button remained enabled after clicking, and mass properties were not stored. INVGEN-76365 |
| Resolved issue where deleted components in sub-assemblies were causing prompts for unresolved components. INVGEN-76619 |
| Resolved issue where the joint/constraint column in the model state table was not recognized in different language versions of Inventor. INVGEN-77146 |
| Resolved issue where Design Doctor is active randomly when working with Model Sates. INVGEN-77381 |
| Improved performance when updating mass properties with a large model state table. INVGEN-79677 |
| Improve performance when accessing the Bill of Materials (BOM) with model states. INVGEN-81083 |
| Parameters |
|---|
| Resolved issue where the error message "A cyclical constraint dependency was detected" was appearing when creating a new 3D model from a sketch in an ipt file, particularly when using a text parameter. INVGEN-76609 |
| Improved stability when opening the Parameters dialog. INVGEN-77857 |
| Resolved issue where the Relationships command now listed work features that were not at the top level of the browser. INVGEN-81374 |
| Parts |
|---|
| Improved stability where there was an error RTTI when updating the specific customer dataset. INVGEN-75866 |
| Improved stability while interacting with Notes in the Model Tree of a corrupted document. INVGEN-76982 |
| Improved stability by resolving the issue where Inventor previously crashed when dragging the EOP to the end. INVGEN-79073 |
| Parts - 2D Sketch |
|---|
| Resolved issue with the API-created Arc2d by adding the CreateArc2dByThreePoints2 method and retiring the CreateArc2dByThreePoints method. INVGEN-70671 |
| Improved performance when calling API PlanarSketch.CopyContentsTo with many dimension constraints in the sketch entities. INVGEN-74376 |
| Resolved issue that involved moving a dependent browser note above its parent node. INVGEN-76184 |
| Improved stability during sketch editing. INVGEN-76628 |
| Improved stability during the trimming of sketch blocks. INVGEN-76836 |
| Improved stability while opening legacy assembly files with sketch patterns. INVGEN-76932 |
| Parts - 2D Sketch - Projection |
|---|
| Resolved issue by correctly handling non-associative cross part projections. INVGEN-67682 |
| Parts - 3D Sketch |
|---|
| Improved stability by enhancing the extension of 3D sketches. INVGEN-76764 |
| Parts - Combine-Sculpt-Split |
|---|
| Resolved issue of instability that could occur when splitting the part. INVGEN-77556 |
| Parts - Derive |
|---|
| Improved performance by speeding up derived assembly selection tenfold and update fourfold. INVGEN-76028 |
| Resolved issue where there were differences between Simplify Pocket range settings in the UI and API. INVGEN-77014 |
| Improved stability when updating the derived part. INVGEN-77340 |
| Improved stability when undoing the derived part. INVGEN-78190 |
| Parts - Direct Edit |
|---|
| Improved stability during the process of editing the body. INVGEN-70338 |
| Improved stability during the process of editing the Direct Edit feature. INVGEN-76912 |
| Parts - Extrude-Revolve-Sweep-Coil |
|---|
| Improved stability when deleting the Revolution feature. INVGEN-76937 |
| Parts - Fillet-Chamfer |
|---|
| Resolved issue where chamfer returned an unexpected result. INVGEN-70844 |
| Parts - iFeature-iPart |
|---|
| Improved performance when placing parts in specific assembly scans of iPart files continuously with the Vault add-in. INVGEN-78574 |
| Parts - Mirror-Pattern |
|---|
| Improved performance when switching the Model States. INVGEN-77564 |
| Resolved issue where hole notes were incorrect for patterned holes. INVGEN-79967 |
| Parts - Sheet Metal |
|---|
| Resolved issueImproved placement of the sketch representation for punches when patterning multiple punch features. INVGEN-70327 |
| Improved stability when using shortcut key in the disabled environment. INVGEN-78704 |
| Resolved issue where the direction of the third face was wrongly reversed during creation. INVGEN-79200 |
| Resolved issue of inability to select dimension from unconsumed sketch for Flange using the Select Feature Dimension command. INVGEN-79528 |
| Improved stability when creating a Flange in an in-place edit part. INVGEN-80556 |
| Resolved issue where the cursor jumped to the HUD incorrectly when inputting values in the flange width. INVGEN-80889 |
| Parts - Sheet Metal - Mark Feature |
|---|
| Improved stability where Inventor was unstable when marking the sketch on a radial surface of the part. INVGEN-77493 |
| Parts - iFeature-iPart |
|---|
| Resolved issue where errors occurred when two separate fillets were extracted to an ifeature. INVGEN-54522 |
| Resolved issue where a warning appeared when the iPart column count exceeded 700 columns. INVGEN-79851 |
| Platform |
|---|
| Resolved issue where the Inventor.exe process was orphaned. INVGEN-71492 |
| Resolved issue where an ordinal error displayed and prevented the creation of a new PackAndGoComponent. INVGEN-79836 |
| Improved stability when editing a driven constraint. INVGEN-80104 |
| Improved stability when using the Measure command. INVGEN-80116 |
| Improved stability when exporting a BOM to Excel. INVGEN-80135 |
| Improved stability when editing constraints. INVGEN-80138 |
| Improved stability when saving a drawing. INVGEN-80312 |
| Improved stability when creating a pipe run. INVGEN-80602 |
| Improved stability when editing a Sketch. INVGEN-81228 |
| Improved stability when placing a component in an assembly. INVGEN-81275 |
| Improved stability when Rendering. INVGEN-81293 |
| Improved stability when using the File Files dialog. INVGEN-81729 |
| Improved stability when import application options. INVGEN-81731 |
| Improved stability when projecting AutoCAD geometry in a Sketch. INVGEN-81884 |
| Improved stability when dragging components between documents. INVGEN-81936 |
| Platform - API |
|---|
| Resolved issueResolved issue where FileManager.IsInventorComponent unexpectedly returned 'True' when the input was not a valid full file path. INVGEN-38943 |
| Resolved issueImproved stability when utilizing iLogic rules with the Vault add-in activated. INVGEN-68541 |
| Resolved issue where no error was returned when a failure occurred while saving a document via iLogic or the API. INVGEN-75630 |
| Improved stability by resolving a performance issue with Vault projects when placing files into an assembly. INVGEN-76988 |
| Resolved issue that prevented the Batch Style Updater user tool from continuing to update files when it encountered a file that could not be updated. INVGEN-77135 |
| Resolved issue of file extension truncation for customized FileMetadata.FileName within the OnPopulateFileMetadata event during the Save As operation. INVGEN-77335 |
| Resolved issue where DocumentDescriptorsEnumerator.Item did not work when indexing into a suppressed file. INVGEN-80078 |
| Resolved issue where the assembly tab displayed when using the API to convert sheet metal occurrences to regular parts. INVGEN-80085 |
| Resolved issue where CommandManager.Pick API responded to the Esc key unexpectedly. INVGEN-81324 |
| Resolved issue where returning InterferenceResults failed for InterferenceResult.InterferenceBody.Volume(). INVGEN-82604 |
| Platform - API - Client Graphics |
|---|
| Resolved issue where the iLogic Measure.Extents functions were including entity name graphics. INVGEN-77479 |
| Platform - API - Drawing |
|---|
| Improved performance when opening or editing the Parts List dialog. INVGEN-75902 |
| Platform - Framework |
|---|
| Resolved issue where the commands ribbon turned black when opening an Inventor file from Excel. INVGEN-69336 |
| Resolved issue where not all settings from an XML in the Preferences folder were imported correctly. INVGEN-77409 |
| Resolved issue with Drawing Transfer Wizard when a different version of Inventor was the last one run. INVGEN-78517 |
| Improved stability when opening multiple files with Design Assistant from Windows Explorer. INVGEN-78951 |
| Resolved issue where ribbon customizations were not imported correctly from the command line using the importcustomizations switch. INVGEN-79949 |
| Platform - Graphics |
|---|
| Resolved issue where Zebra analysis was incorrectly displayed. INVGEN-77098 |
| Resolved issue where the Sketch opacity application option did not work. INVGEN-78025 |
| Platform - Graphics - Drawing |
|---|
| Resolved issue of stability enhancement while updating the drawing file post assembly rebuild. INVGEN-76061 |
| Platform - Naming and Matching |
|---|
| Improved stability when updating derived sheet metal part. INVGEN-75794 |
| Platform - OEM |
|---|
| Resolved issue where it was not possible to copy/cut and paste between AutoCAD OEM, Inventor, and Inventor OEM. INVGEN-76203 |
| Share View |
|---|
| Improved stability during the creation of new shared views with large assembly data. INVGEN-75542 |
| Resolved issue where a shared view could not be created when access to www.gstatic.com was blocked. INVGEN-76282 |
| Translators |
|---|
| Resolved issue where colors defined in the assembly were not displayed in the STEP export. INVGEN-69559 |
| Improved stability in the exportation of SAT files. INVGEN-73490 |
| Improved stability during STEP export with certain imported obj files. INVGEN-75825 |
| Resolved issue where an additional 3D Sketch was created upon opening a STEP file. INVGEN-76842 |
| Improved stability issue when importing certain SAT files into Inventor. INVGEN-76944 |
| Resolved issue that caused incorrect visibility in exported STP files. INVGEN-77216 |
| Improved performance when importing a STEP file. INVGEN-77514 |
| Improved stability when exporting to JT versions older than 9.0. INVGEN-77661 |
| Improved performance when importing large STEP files into Inventor. INVGEN-78842 |
| Translators - DWF |
|---|
| Resolved issue where the revolved component was missing when exporting to DWF. INVGEN-76124 |
| Translators - DWG-DXF |
|---|
| Resolved issue where a DWG exported from Inventor displayed incorrect dimensions when opened in AutoCAD. INVGEN-75414 |
| Resolved issue where the displayed value of a dimension was incorrect in DXF exports. INVGEN-76492 |
| Resolved issue where Inventor displayed layers during the import of Autocad DWG files. INVGEN-77603 |
| Resolved issue where the layer map was not applied during dwg export through Inventor server 2023. INVGEN-78014 |
| Translators - PDF |
|---|
| Improved stability when importing to PDF. INVGEN-77028 |
| Translators - Revit |
|---|
| Resolved issue where the process could not access the file because it was being used by another process when exporting to RVT from Inventor. INVGEN-78243 |
| UI |
|---|
| Resolved issue where the mini toolbar did not display near the cursor on a second monitor. INVGEN-77458 |
| Resolved issue where "Save Copy As" and "Export CAD Format" did not use the previously used file path and name. INVGEN-79673 |
| UI - Browser |
|---|
| Improved stability when selecting a sketch in a part file. INVGEN-75729 |
| Improved stability when using the search in the Model Browser. INVGEN-77217 |
| Resolved issue where the OnHelp and OnActive events were not sent for the Model browser panel. INVGEN-78000 |
| Resolved issue where the GetBrowserNodeFromObject API was causing file corruption in certain situations. INVGEN-78220 |
| Resolved issue where a custom dockable window always had a Close button. INVGEN-79556 |
| UI - Framework |
|---|
| Resolved issue where the API incorrectly added a flat pattern tab to the top assembly when calling the Unfold method for inactive sheet metal parts. INVGEN-72690 |
| Resolved issue where values were not picked up correctly when entered too quickly. INVGEN-77255 |
| Resolved issue where the components in the folder were skipped when using invert selection. INVGEN-80023 |