2026.2 Update
November-2025
| Add-Ins - Cable and Harness |
|---|
| Improved stability in Cable/Piping sketch route when using route workflow. INVGEN-86740 |
| Add-Ins - Content Center |
|---|
| Resolved issue with cell colors: For expression columns, the values are now displayed in blue; for other columns, they are displayed in black. INVGEN-74895 |
| Resolved issue where Content Center components were not recognized after updating CC parts. INVGEN-80544 |
| Resolved issue where a Content Center part showed as out of date after refresh. INVGEN-84378 |
| Improved stability when the Content Center window was locked via VBA. The window no longer stays open during the OnClose() event, which previously cleared the window's content and some pointers, leading to crashes when the user clicked anything. INVGEN-84844 |
| Resolved issue with being unable to create a component when placing from Content Center for a published custom iPart based on a custom Content Center member. INVGEN-85055 |
| Add-Ins - Design Accelerator |
|---|
| Resolved issue where the bolted connection did not sit correctly when using the concentric constraint. INVGEN-85705 |
| Resolved issue while creating an internal groove using the standard DIN 5842-30 with Involute Splines Connection Generator. INVGEN-86545 |
| Add-Ins - Design Checker - Feature Recognition - Mesh Enabler |
|---|
| Improved stability when converting the mesh to a base feature. INVGEN-86211 |
| Add-Ins - Frame Generator |
|---|
| Resolved issue where Break Reuse Members was not working for specific part in design. INVGEN-83385 |
| Resolved issue where the "Merge Frame Members" option was unavailable when using a derived 3D sketch for Insert Frame. INVGEN-83510 |
| Improved stability while inserting frames and zooming in and out. INVGEN-84963 |
| Improved stability while doing some operations in Frame Generator dialogs. INVGEN-86584 |
| Add-Ins - Simulation |
|---|
| PDF format is now available for installed MS Word or MS Edge web browser (using Print to PDF). INVGEN-85358 |
| Add-Ins - Simulation - Frame Analysis |
|---|
| Improved stability when simulating a frame analysis. INVGEN-85484 |
| Improved stability when simulating a stress analysis. INVGEN-85519 |
| Add-Ins - Simulation - Stress Analysis |
|---|
| Improved stability when activating the stress/frame analysis add-in with a 3D mouse. INVGEN-84212 |
| Add-Ins - Task Scheduler |
|---|
| Resolved issue where Task Scheduler stopped running on multiple processes. INVGEN-67056 |
| Resolved issue where printing files from IDW to PDF using Task Scheduler would not complete if a different model state was activated other than primary. INVGEN-84155 |
| Add-Ins - Tube and Pipe |
|---|
| Resolved issue where editing fitting orientation does not work after replacing a component in Inventor. INVGEN-84848 |
| Improved stability while using "Routed Systems: Cable & Harness" and "Routed Systems: Tube & Pipe" add-in. INVGEN-85382 |
| Resolved issue where the fitting thickness was not maintained when creating a pipe run. INVGEN-85384 |
| Add-Ins - iLogic |
|---|
| Improved stability by resolving an unhandled exception that occurred with the message "StartIndex ('-2') must be a non-negative value (Parameter 'startIndex')" when a parameter was inserted in the iLogic editor using the UI double-click interface. INVGEN-83524 |
| Resolved issue where the update of parameters linked to Excel was disrupted by the iLogic log. INVGEN-84527 |
| Resolved issue where the iLogic function DeleteAllRulesInDocument threw an error when called from a rule in the document. INVGEN-85927 |
| AnyCAD - FDX |
|---|
| Improved stability when loading a data exchange into Inventor. INVGEN-85904 |
| Assemblies |
|---|
| Improved stability placing a component in an assembly. INVGEN-85509 |
| Improved stability when in-place editing a part and right-clicking on a custom feature node. INVGEN-85994 |
| Improved stability when updating the assembly. INVGEN-86699 |
| Assemblies - BOM |
|---|
| Resolved issue where the model could not be opened from the Bill of Materials. INVGEN-85531 |
| Assemblies - Constrain - Joint - Assemble |
|---|
| Improved stability when using constraints with a circle. INVGEN-85399 |
| Resolved issue while defining a constraint and confirming it using the "Apply" button. INVGEN-85753 |
| Resolved issue where the second rotation arrow displayed flipped in the graphic symbol for motion constraint. INVGEN-85870 |
| Improved stability when dragging the part to create an insert constraint. INVGEN-85912 |
| Assemblies - Create - Place - Edit |
|---|
| Improved stability by resolving the issue related to AMxChangeCompState::OnTerminate as identified. INVGEN-86068 |
| Assemblies - Derived - Simplify |
|---|
| Resolved issue where the Include command was grayed out in drawing. INVGEN-82133 |
| Improved stability when editing a simplified assembly. INVGEN-85972 |
| Assemblies - Update - Rebuild |
|---|
| Improved stability while working on an assembly file or while executing the update command. INVGEN-85731 |
| Cloud Services - Inventor IO |
|---|
| Resolved issue with 3D annotation improvement during SVF export generation on the Autodesk Platform service. INVGEN-68752 |
| Drawings |
|---|
| Resolved issue with incorrect thumbnail size in the drawing. INVGEN-85209 |
| Drawings - Balloons |
|---|
| Resolved issue where attached balloons could not be moved. INVGEN-84411 |
| Improved stability when selecting a line of a Parts list. INVGEN-86737 |
| Drawings - Dimensions |
|---|
| Resolved issue where Punch notes removed the tolerance value from the previously created dimension. INVGEN-81898 |
| Resolved issue for Angular Sum dimension type creation. INVGEN-85127 |
| Drawings - Print - Plot |
|---|
| Improved stability when viewing a print preview of a drawing that is rotated by 90 degrees. INVGEN-85782 |
| Drawings - Styles |
|---|
| Resolved issue where changing the color of the layer did not change the tolerance color. INVGEN-84745 |
| Resolved issue when editing Tolerance Text Style in the Styles manager did not set the correct text style. INVGEN-85346 |
| Resolved issue where the section view hatch angle set in the style was not applied correctly. INVGEN-85498 |
| Drawings - Symbols |
|---|
| Resolved issue where, in a drawing view within a break view environment, creating a centerline for a slot on the side of a cylinder resulted in an incorrect centerline. INVGEN-80165 |
| Drawings - Tables |
|---|
| Resolved issue where a backslash was replaced by a double-backslash in the revision table. INVGEN-84046 |
| Drawings - Text |
|---|
| Resolved issue where the property source of drawing notes was getting lost. INVGEN-83959 |
| Resolved issue where the GeneralNote.FormattedText.Replace(OldText, NewText) function broke ordered number lists. INVGEN-84671 |
| Resolved issue where View Sheet Zone was not updated after changing the sheet size. INVGEN-85126 |
| Drawings - True Connect |
|---|
| Resolved issue when editing a view after using Save Copy As for an Inventor DWG drawing. INVGEN-85577 |
| Drawings - Views - Aux - Section - Detail |
|---|
| Resolved issue where the hatch on the large-scale views was rendered outside of the geometry. INVGEN-85832 |
| Drawings - Views - Break - Break Out - Slice - Crop |
|---|
| Resolved issue where the crop disappeared after placing a constraint on the crop line. INVGEN-83027 |
| iAssembly - iPart |
|---|
| Resolved issue where a sheet metal iPart could not be switched in the flat pattern environment. INVGEN-86185 |
| Resolved issue where the iPart table became disorganized when setting key parameters. INVGEN-86601 |
| Improved stability when switching iAssembly member. INVGEN-87078 |
| Measure |
|---|
| Resolved issue where Face.GetClosestPointTo() returned the same point as the specified point. INVGEN-86569 |
| Model States |
|---|
| Improved stability when deleting a column in the Model States Table. INVGEN-85544 |
| Improved stability by resolving the issue where opening a file with many model states caused Inventor to hang. INVGEN-86039 |
| Model States - API |
|---|
| Resolved issue where FullFileName in OnFileDirty returned the [Primary] model state name. INVGEN-85917 |
| Parameters |
|---|
| Resolved issue where, after editing a linked spreadsheet without making changes and then saving it, the referenced files threw warnings in Inventor. INVGEN-82260 |
| Parts |
|---|
| Improved stability while opening the IDW. INVGEN-83991 |
| Parts - 2D Sketch |
|---|
| Resolved issue with the Textbox formatted text for font size. INVGEN-68932 |
| Resolved issue where the Sketch.OriginPoint could not be changed to a SketchPoint in a sketch block via iLogic. INVGEN-77837 |
| Resolved issue where the parameter of the sketch pattern pitch could not be seen. INVGEN-85353 |
| Resolved issue related to Sketch Circular Pattern. INVGEN-85710 |
| Improved stability by resolving the issue where checking the SketchCircularPattern Fitted option caused Inventor to crash. INVGEN-85715 |
| Improved stability when adding a dimension. INVGEN-86830 |
| Parts - Extrude - Revolve - Sweep - Coil |
|---|
| Improved stability by resolving the edit feature failure. INVGEN-86500 |
| Parts - Finish Feature |
|---|
| Resolved issue where the Finish feature could not be created on multiple occurrences of the same body or face in an assembly. INVGEN-86300 |
| Parts - Loft - Draft |
|---|
| Improved stability when deleting the sketch while creating a surface loft. INVGEN-86521 |
| Parts - Mirror - Pattern |
|---|
| Resolved issue where a renamed axis was not displayed when selecting the direction to add a pattern. INVGEN-84360 |
| Improved stability when restoring the second framework window from being minimized. INVGEN-85365 |
| Parts - Sheet Metal - Face - Flange - Contour Flange - Corner Seam |
|---|
| Improved stability by resolving the issue where making the sheet metal thin caused a crash. INVGEN-81991 |
| Resolved issue where the face or edge of a sheet metal part could not be selected. INVGEN-83099 |
| Resolved issue where, when opening previous version data that created contour flanges in two directions from one sketch, the position of the second contour flange moved. INVGEN-84207 |
| Resolved issue where the flange error was caused by the Sheet Metal Default overriding solid-specific thickness in multi-solid part files. INVGEN-84914 |
| Platform |
|---|
| Improved stability when migrating Style Libraries. INVGEN-85287 |
| Improved stability when updating an assembly. INVGEN-86732 |
| Improved stability updating the mass properties of an assembly. INVGEN-86767 |
| Improved stability of File Dialog. INVGEN-87302 |
| Platform - API |
|---|
| Resolved issue where the BrowserPane.Activate did not function correctly for the Model browser pane. INVGEN-82910 |
| Improved stability when closing all documents that had been checked into the Vault. INVGEN-83765 |
| Platform - API - Drawing |
|---|
| Resolved issue where running an iLogic rule placed the parts list onto the sheet. INVGEN-83666 |
| Improved stability when selecting a dimension after executing the DLxCopyDimPropertiesCmd. INVGEN-85760 |
| Platform - Framework |
|---|
| Improved stability of keeping the customization of the ribbon through different Inventor sessions. INVGEN-84061 |
| Improved stability with the file dialog. INVGEN-84563 |
| Resolved issue where saving files showed them as outside the project. INVGEN-84888 |
| Importing application options setting from the command line no longer overrides the iLogic external paths. INVGEN-85237 |
| Improved stability for the File Open Dialog. INVGEN-85329 |
| Improved stability with Design Assistant when selecting a Project. INVGEN-86477 |
| Improved behavior of File Dialog's project dropdown list to sort by file names instead of file paths. INVGEN-86802 |
| Platform - Graphics - Drawing |
|---|
| Resolved issue where radial dimensions disappeared on a drawing when moving views. INVGEN-80626 |
| Presentations |
|---|
| Improved stability when editing the Storyboard of a Presentation file. INVGEN-86083 |
| Translators |
|---|
| Improved stability when opening the PRT file. INVGEN-84975 |
| UI |
|---|
| Improved stability of customizing the QAT with commands. INVGEN-81263 |
| Resolved issue by adding support for the scroll wheel to work in the Application Options dialog. INVGEN-84034 |
| UI - Framework |
|---|
| Resolved issue where the Property Panel commands, such as Rectangular Pattern, Fillet, did not hide the tool palette when switching to the Home. INVGEN-85027 |