This dialog allows users to generate and configure incident runs or response runs.
The options available on this dialog are displayed below:
|
Option |
Description |
|---|---|
|
Run Name |
Name of the run. IWLive Pro provides an automatically generated name that can be overwritten by the user. |
| Duration | Duration of the simulation in a dd:::hh:mm format. |
|
Warning Template |
Drop-down list containing the available warning templates. Warning templates present in this list are warning templates that have been associated with the baseline. |
|
Water Quality Run |
Tick to indicate that the run is a Water Quality Run. |
|
Solute Data |
Enabled for Water Quality runs. Drop-down list containing the available solute data objects. Solute Data objects present in this list are the ones that have been associated with the baseline. See Water Quality page of the baseline. |
|
Clear initial concentrations |
Enabled for Water Quality runs. Reset the initial concentration of the solute data to zero. This is to be used if the run about to be generated (incident run or response run) is for a different substance to the run it originates from (projection or incident run, respectively). |
|
Trace Node |
Enabled for Water Quality runs. Set a node in the network to be used as a trace node. Source tracing tracks over time the percent of water reaching any node in the network that had its origin at a particular node, called trace node. |
| Use BalanceNet |
Enabled for BalanceNet runs. This option is available for runs that have been optimised using BalanceNet. Enable this option to indicate that the incident or response run about to be created is to be optimised using BalanceNet. |
|
OK |
Create the run. The Simulate button of the Runs Window needs to be pressed for the simulation to start. |
|
Cancel |
Abort run creation and close the dialog. |