Share

Windows Installation

Autodesk Moldflow Data Fitting is installed as a bundle containing the Autodesk Moldflow Data Fitting product and optionally the Autodesk Moldflow Material Data Classifier product. The Autodesk Moldflow Material Data Classifier can be installed as an additional component during the initial installation of the bundle, or afterwards by using the Modify the bundle instructions below.

To install this bundle

The Autodesk Moldflow Data Fitting bundle is installed by the Autodesk Installer tool by the following steps:

  1. To install from a downloaded executable file, navigate to the file, and double-click on the setup executable to start the installation.
  2. The Autodesk Installer tool will start by initially displaying the Legal agreement page. Select the appropriate language and review the agreement. Check the "I agree" if the terms are acceptable and click Next. Note: If you reject the license agreement, then you cannot install the software.
  3. Choose the install location and click Next
  4. Select whether to include the Autodesk Moldflow Material Data Classifier as an additional component of this install. Then click Install to start the installation process.
  5. The Autodesk Installer tool will then display the installation progress and advise you when it has completed.
  6. Click Finish to exit the Autodesk Installation tool.
  7. The Autodesk Moldflow Data Fitting and, if selected, the Autodesk Moldflow Material Data Classifier will appear as separate products in the Windows Start Menu.

To install this bundle silently:

  1. Open a Command prompt as administrator

  2. In the Command prompt, navigate to the product install 'CDROM_AMDF' folder that contains the setup.exe

  3. Type this command, followed by Enter:

    Setup.exe --silent

Uninstall the bundle

The Autodesk Moldflow Data Fitting and Autodesk Moldflow Material Data Classifier products are installed as a bundle under the Autodesk Moldflow Data Fitting name. This entire bundle containing both products can be uninstalled by the following steps:

  1. Type "Add or remove programs" in the Windows search bar and press enter.
  2. Select the "Autodesk Moldflow Data Fitting" version and click on the Uninstall button once, and then again to launch the Autodesk Installer tool.
  3. The Autodesk Installer tool will present the products installed in this bundle. Click Uninstall to remove these products from the system.

To uninstall this bundle silently:

  1. Open a Command prompt as administrator

  2. In the Command prompt, navigate to the product install 'CDROM_AMDF' folder that contains the setup.exe

  3. Type this command, followed by Enter:

    Setup.exe -i uninstall --silent

Modify the bundle

The Autodesk Moldflow Material Data Classifier is an optional product of the Autodesk Moldflow Data Fitting bundle. So the Autodesk Moldflow Material Data Classifier product can either be added or removed by the following steps:

  1. Type "Add or remove programs" in the Windows search bar and press enter.
  2. Select the "Autodesk Moldflow Data Fitting" version and click on the Modify button to launch the Autodesk Installer tool.
  3. The Autodesk Installer tool will present the optional products available in this bundle, where you can select to add or remove this optional product.
  4. Click Finish to confirm your selection.

Was this information helpful?