Deletes individual support geometry based on type and placement in Z
| Parameter | Description | Notes |
|---|---|---|
| Description |
Holds a text label for the action that remains visible even when the action parameters are collapsed in the script tab |
|
Color
|
Sets a display color for the support elements generated by this action |
Cannot be reverted once changed, only explicitly set to a new color Ignored for this action |
|
Support type
|
This action works only one type of support at a time. Use separate instances of this action to process other types. |
Bar, Polyline, Volume |
|
Z range
|
Enable or disable filtering by Z range above build platform |
|
| Above Z value, Below Z value, Apply Z range to |
Only those support elements are selected for modification that fall into this Z range above build platform either fully or at least partly |
Entire entity, Upper end, Lower end |
|
Height
|
Enable or disable filtering by vertical extension independent from absolute Z values |
|
| Minimum bounding box height, Maximum bounding box height |
Limit selection of support elements by their vertical extension |
|
|
Volume
|
Disable filtering based on volume completely or choose between open and closed or solid supports |
|
|
Minimum support volume,
Minimum support volume
|
Limit selection of closed or solid support elements by their volume |
Unavailable when filtering is disabled or set to Open supports |
| Connected support handling |
Supports consisting of multiple connected elements, like bars in bouquets, can either count as a whole for this filtering or have their individual elements count separately. For example, keep a long solid-bar stem and convert only the shorter branches to thin bars with single-pass cross-type cross-sections. |
Depends on selection of Support type |