| E5046
|
WARNING: E5046
|
NO CONVERGENCE IN THE MAXIMUM NUMBER OF ITERATIONS PERMITTED
|
|
|
Cause:
|
The convergence tolerance (default 1.0E-6) for eigenvalue extraction could not be achieved in the maximum number of iterations permitted (default zero value will iterate until convergence is achieved).
|
|
|
Action:
|
Change one or both of the following parameters on the
EIGRL or
EIGC Bulk Data entry:
- Increase the maximum number of iterations permitted.
- Increase the convergence tolerance.
|
|
|
Remarks:
|
See Autodesk Nastran Reference Guide, Section 4,
Bulk Data, for entry format.
|
