| G3030 | WARNING: G3030 | THERE WERE n GRID POINTS WITH NO CONNECTIVITY |
| Cause: | One or more points existed in the model database that was not associated with any element or multipoint constraint. | |
| Action: | Investigate the grid points listed in the Geometry Processor output of the Model Results Output File. If PARAM, AUTOSPC is set to ON, these grid points will be automatically constrained out. If PARAM, AUTOSPC is set to OFF, a singularity error will result at the first unconnected grid point encountered in the global stiffness matrix. | |
| Remarks: | None. |