S Properties Reference (ActiveX)

These ActiveX properties all start with 'S'.

Properties

  • SaveAsType

    Specifies the drawing type for saving the drawing.

  • Saved

    Specifies if the document has any unsaved changes.

  • SavePreviewThumbnail

    Specifies if BMP preview images are saved with the drawing.

  • Scale

    Specifies the scale factor from start to the end of the sweep path.

  • ScaleFactor

    Specifies the scale factor for the object.

  • ScaleHeight

    Specifies the height of the object as a percentage of its original height.

  • ScaleLineweights

    Specifies if the lineweight is scaled with the rest of the geometry when a layout is printed.

  • ScaleWidth

    Specifies the width of the object as a percentage of its original width.

  • SCMCommandMode

    Determines right-click functionality in the drawing area while in Command mode, which means that a command is currently in progress.

  • SCMDefaultMode

    Determines right-click functionality in the drawing area while in Default mode, which means that no objects are selected and no commands are in progress.

  • SCMEditMode

    Determines right-click functionality in the drawing area while in Edit mode, which means that one or more objects are selected and no commands are in progress.

  • SCMTimeMode

    Controls time-sensitive right-click behavior.

  • SCMTimeValue

    Controls time-sensitive right-click behavior by setting the duration of the long click that displays a shortcut menu.

  • SecondPoint

    Specifies the second point of the ray or xline.

  • SecondSegmentAngleConstraint

    Specifies the SecondSegmentAngleConstraint of the mleaderstyle.

  • SectionManager

    Returns the section manager object.

  • SectionPlaneOffset

    Specifies the offset distance of the section plane.

  • Segmentation

    Returns the segmentation data status of the point cloud.

  • SegmentPerPolyline

    Specifies the number of line segments to be generated for each polyline curve.

  • Selection

    Gets the PreferencesSelection object.

  • SelectionSets

    Gets the SelectionSets collection for the document.

  • SerialNumber

    Specifies the serial number of the digital certificate.

  • Settings

    Retrieves the section geometry settings for the Section object.

  • ShadePlot

    Specifies the shaded viewport plotting mode of a viewport.

  • ShadowDisplay

    Specifies the shadow display property of the object.

  • SheetView

    Returns and sets the sheet view associated with the viewport.

  • ShortcutMenu

    Determines if the specified popup menu is the shortcut menu.

  • ShortCutMenuDisplay

    Controls whether right-clicking in the drawing area displays a shortcut menu or issues Enter.

  • Show

    Specifies whether the property is shown in the user interface.

  • ShowAssociativity

    Specifies if dependent surfaces are highlighted when the surface is selected.

  • ShowClipped

    Enables or disables the clipping boundary.

  • ShowCropped

    Specifies if the point cloud is shown cropped.

  • ShowHistory

    Specifies whether to show history of the solid.

  • ShowIntensity

    Specifies if the point cloud is displayed using a shaded color scheme.

  • ShowPlotStyles

    Specifies whether or not plot styles and plot style names are displayed in the drawing.

  • ShowProxyDialogBox

    Specifies if AutoCAD displays a warning message when you open a drawing that contains custom objects.

  • ShowRasterImage

    Controls the display of raster images during real-time pan and zooms.

  • ShowRotation

    Determines if a raster image is displayed at its rotation value.

  • ShowWarningMessages

    Resets all dialog boxes that have the "Don't Display This Warning Again" check box so they display again.

  • SingleDocumentMode

    Determines if AutoCAD runs in single- or multiple-document mode.

  • SliceDepth

    Specifies the thickness of the section plane.

  • Smoothness

    Specifies the level of smoothness for the SubD mesh.

  • SnapBasePoint

    Specifies the snap base point for the viewport.

  • SnapOn

    Specifies the status of snap.

  • SnapRotationAngle

    Specifies the snap rotation angle of the viewport relative to the current UCS.

  • SolidFill

    Specifies if multilines, traces, solids, all hatches (including solid-fill), and wide polylines are filled in.

  • SolidType

    Indicates the type of solid.

  • SourceObjects

    Specifies the source objects for section generation.

  • SplineFrame

    Specifies the display of the control vertices (CVs) for a spline.

  • SplineMethod

    Specifies the type of the spline.

  • StandardScale

    Specifies the standard scale for the layout, viewport, or plot configuration.

  • StandardScale2

    Specifies a standard scale for the viewport.

  • StartAngle

    Specifies the start angle of an arc or an ellipse.

  • StartDraftAngle

    Specifies the draft angle of the surface for the first cross section.

  • StartDraftMagnitude

    Specifies the draft magnitude of the surface for the first cross section.

  • StartParameter

    Specifies the start parameter for an ellipse.

  • StartPoint

    Specifies the start point for the arc, line, or ellipse.

  • StartSmoothContinuity

    Specifies the tangency and curvature of the first cross section.

  • StartSmoothMagnitude

    Specifies the size of the curve of the first cross section.

  • StartTangent

    Specifies the start tangent for the spline.

  • State

    Specifies section object type.

  • State2

    Specifies section object type.

  • StatusID

    Gets the current active status of the viewport.

  • StoreSQLIndex

    Determines if the SQL index is stored in the drawing.

  • StyleName

    Specifies the name of the style used with the object.

  • StyleSheet

    Specifies the style sheet for the layout or plot configuration.

  • Stylization

    Specifies color stylization for selected point cloud.

  • Subject

    Specifies the subject name of the digital ID (certificate) or drawing.

  • SubMenu

    Gets the popup menu associated with a sub menu.

  • SubUnitsFactor

    Specifies the sub-units scale factor for dimension when unit changes to sub-unit.

  • SubUnitsSuffix

    Specifies the sub-units suffix for dimensions when unit changes to sub-unit.

  • SummaryInfo

    Specifies the properties of a drawing.

  • SupportPath

    Specifies the directories where AutoCAD searches for support files.

  • SuppressLeadingZeros

    Specifies the suppression of leading zeros in dimension values.

  • SuppressTrailingZeros

    Specifies the suppression of trailing zeros in dimension values.

  • SuppressZeroFeet

    Specifies the suppression of a zero foot measurement in dimension values.

  • SuppressZeroInches

    Specifies the suppression of a zero inch measurement in dimension values.

  • SurfaceNormals

    Specifies for which cross-section curves the surface is normal to the cross section.

  • SurfaceType

    Indicates the type of surface.

  • SurfTrimAssociativity

    Specifies if associativity is maintained between the surface and the objects used to trim the object.

  • SymbolPosition

    Specifies placement of the arc length dimension symbol.

  • System

    Gets the PreferencesSystem object.

Related Reference