Name — Enter a name for the feature.
— Select an option from the list to specify the type of groove:
- Face — Creates a groove feature on a face which points in the positive Z direction.
- Back face — Creates a groove feature on a face which points in the negative Z direction.
- Outer diameter — Creates a groove feature on the outer surface of a turned part.
- Inner diameter — Creates a groove feature on the inner surface of a turned part.
Edit profile curve — Click to create or edit the profile curve of the feature using the Curve Editor tab.
Extract pattern — Click to extract the curves that define the selected features into the active Pattern. If no Pattern exists a new one is created.
Discard curves — Click to deselect all selected curves and remove any features created from them.
Workspace — Select which workspace you are working in:
- Feature group — Specifies the point with respect to the active feature group workplane.
- World — Specifies the point with respect to the global coordinate system.
Z Value — Enter a value to specify the position of the feature along the Z axis with respect to the workspace.
Reset — Click to reset the feature creation parameters to their default values.