Share

Toolpath crosses rotary axis warning in Autodesk Fusion

Technical Support

Issue:

User's have reported seeing the following warning message:

Warning: Toolpath crosses rotary axis.
image.png

Causes:

There is no Clearance offset provided in the Radii tab under tool settings.

Solution:

Follow these steps:
  1. Right-click the toolpath.
  2. Click Edit.
  3. Select the Radii tab.
  4. Under Clearance offset, change the value of offset to be less than the inner radius offset.
Note: If the Inner Radius offset is set to zero, it will be necessary to give it an offset amount such as 0.1 or so.
image.png
 

Products:

Fusion;

Was this information helpful?