Create geometry in a drawing sketch

Learn how to create geometry in a drawing sketch.

In the Drawing workspace, click Create > Create Sketch to enter the Sketch contextual environment.

Create a Line

On the toolbar, select Create > Line .
Click to specify the first point.
Click to specify another point.
- Click to specify a third point, which creates a second line connected to the first, or
- Press Enter to complete the first line and start a second separate line.
Press Esc to exit the tool.

Note: If you press Enter, but you want to connect your next line to the end of the one you just completed, press Enter again, and the next line will start at the last end point you specify.

Create a 2-Point Rectangle

On the toolbar, select Create > 2-Point Rectangle .
Click to specify the first corner.
Click to specify the opposite corner.
Press Esc to exit the tool.

Create a Center Radius Circle

On the toolbar, select Create > Center Radius Circle .
Click to specify the center point.
Click to specify the radius.
Press Esc to exit the tool.

Create a 3-Point Arc

On the toolbar, select Create > 3-Point Arc .
Click to specify the start point.
Click to specify the end point.
Click to specify the tangent direction.
- Click anywhere to specify the start point for a second separate arc, or
- Press Enter to start a second arc from the endpoint of the first arc.
Press Esc to exit the tool.

Create a Leader

On the toolbar, select Create > Leader .
Click to specify the start point.
Click to specify the end point.