Share

Modify geometry in a title block

Learn how to modify geometry in a title block.

In the Drawing workspace, select the title block, right-click, then select Edit Title Block to enter the Title Block contextual environment.

Note: If the New Title Block displays first, you need to create a new title block before you can modify it.
Templates

If you plan to reuse title blocks, borders, document settings, or sheet settings across multiple drawings, create a drawing template to save time and apply consistent standards. You can also create placeholder views and placeholder tables that automatically generate drawing views and part lists from the referenced design when you use the template to create a new drawing.

Move title block geometry

  1. On the toolbar, select Modify > Move move icon.

  2. Click to select geometry.

  3. In the Move dialog, next to Transform, click Point to Point.

  4. Click to specify the base point.

  5. Click to specify the second point.

    To move the same selection set again, click to specify a new base point, then click to specify a new second point.

  6. Click OK.

Rotate title block geometry

  1. On the toolbar, select Modify > Rotate rotate icon.

  2. Click to select geometry.

  3. In the Rotate dialog, next to Transform, click Point to Point.

  4. Click to specify the base point.

  5. Click to specify the rotation angle.

    To rotate the same selection set again, click to specify a new base point, then click to specify a new rotation angle.

  6. Click OK.

Copy title block geometry

  1. On the toolbar, select Modify > Copy copy icon.

  2. Click or click and drag to select geometry.

  3. In the Copy dialog, next to Transform, click Point to Point.

  4. Click to specify the base point.

  5. Click to specify the second point.

    Click again to create an additional copy.

  6. Click OK.

Trim title block geometry

  1. On the toolbar, select Modify > Trim trim icon.

  2. Click to trim geometry.

    To extend geometry, press Shift, then click.

  3. To complete the Trim command, press Enter.

Extend title block geometry

  1. On the toolbar, select Modify > Extend extend icon.

  2. Click to extend geometry.

    To trim geometry, press Shift, then click.

  3. To complete the Extend command, press Enter.

Offset title block geometry

  1. On the toolbar, select Modify > Offset offset icon.

  2. Click to select the geometry to offset.

  3. Click to specify the Distance to offset.

    Click again to offset the geometry again.

  4. Click OK.

Delete title block geometry

  1. On the toolbar, select Modify > Delete delete icon.
  2. Click to select geometry.
  3. In the Delete dialog, click OK.
Parent page: Create or edit a title block

Was this information helpful?