Activity 2: Create a center mark

In this activity, you:

• Create a Center Mark.

Prerequisites

• Activity 1 is complete.

Steps

1. Create a Center Mark.

   A center mark is used to indicate the center of a rounded edge or object.

   1. From the Geometry toolbar, select Center Mark.

      

      The Center Mark command is located under the Geometry drop-down list.

   2. Select the large opening on the front view. Make sure you select the inner closed circular edge.

   3. Press Esc to complete the command.

      

      The Center Mark is created.

Activity 2 summary

In this activity, you:

• Created a Center Mark.