Post Library reference
The Post Library allows you to include post processors from the standard Fusion Library, into your Local or Cloud libraries. These posts processors can be used in a machine definition. The library can be accessed directly through the Post Library tool or indirectly through the Machine Library. Both methods are discussed below.
Direct access
Manufacture > Manage > Post Library 
The Post Library is divided into three general sections:
- Available post processor libraries shown on the left
- Available post processors shown in the middle
- Filters to limit the available post processors and Info about a selected post processor are shown on the right
The Fusion Library includes common post processors for a variety of machine types. The Local folder is for personal post processors available on your local device. The Cloud folder is for personal post processors available from the cloud, for use on any device. The Linked folder is for accessing post processors that are located in a folder elsewhere on your device.
To find a post processor, you can select the Capabilities from the Filters section in the right window. The Vendor pull down allows additional filtering by machine or control manufacturer. The Filters limit what is displayed in the Middle section. Once a desired post processor is found, you can drag it to your Local or Cloud folder.
The icons on the toolbar above the post processors provide additional capabilities:
- Edit selected
allows you to edit the selected post processor. - Copy
the selected post processor. - Paste
the post processor to the selected library. - Import
post processors saved on the local drive. - Export
selected post processors to the local drive.
If you have a post processor already
Right-click the Linked library folder and select Linked Folder.
Navigate to the folder location for your existing post processor and click Select Folder. The center window will display any Post Processors available in the folder.
Select the desired post processor from the list and click Select.
Access through the Machine Library
Manufacture > Manage > Machine Library 
This method requires the Machine Library be open and a machine be selected from the Local or Cloud libraries. With the machine selected, you see a message that says a "Post is not selected". Click the folder icon next to this message to open the Post Library.
