Learn how to copy sketches and sketch elements. Whether you are copying sketch elements within one sketch or copying sketch elements or an entire sketch into a different sketch , the sketch you are pasting the entities into must be active, meaning you are editing the sketch you are bringing the copied sketch entities into.

Mirror The Mirror tool creates a copy of selected sketch curves mirrored across a line in the active sketch .

In the Copy dialog, you can copy sketch geometry in the Sketch contextual environment in the Drawing workspace in Fusion.

Learn how to use the Rectangular Pattern tool to create identical copies of sketch geometry in a rectangular pattern in Fusion.

Right-click and select OK to finish, or Repeat Center Circle Diameter for additional bolt holes. Click Finish Sketch to exit sketch mode. Click on Body1 in the Browser, right click, and select Copy , to make a copy of your starting model.

Click again to create an additional copy . Click OK. Trim sketch geometry On the toolbar, select Modify > Trim .

Learn how to use the Mirror tool to create an identical copy of sketch geometry across a line of symmetry in Fusion.

If you edit one instance of a sketch , copies you created before you made the change do not update to reflect the change.

Design > Sketch > Create > Project/Include > Project Use project geometry to create copies of existing model geometry and sketch entities in the active sketch .

Learn how to use the Circular Pattern tool to create identical copies of sketch geometry in a circular pattern in Fusion.

Move/ Copy (M) Move or copy a face, body, sketch curve, component, or sketch geometry.

You can use the following tools to modify sketch geometry: Fillet Equal Distance Chamfer Distance And Angle Chamfer Two Distance Chamfer Trim Extend Break Sketch Scale Offset Blend Curve Move/ Copy Change Parameters Note: Before you can modify sketch geometry, you must right-click the existing sketch and select Edit Sketch to enter the Sketch contextual environment.

The Sketch tab is divided into panels: Create Modify Text Inspect Finish Sketch Create panel Select any of the commands in the Create panel to create new geometry: Line 2-Point Rectangle Center Radius Circle 3-Point Arc Leader Modify panel Select any of the commands in the Modify panel to modify geometry: Move Rotate Copy Trim Extend Offset Delete Text panel Select the Text command to add text to the sketch .

Click this to access the Sketch Tools. Extrude Extend the shape of a 2D sketch , or curves, in a straight line, to create a surface shape.

Click Finish Sketch from the Sketch Palette to exit sketch .