Refine By
  • Knowledge Source
    • Accepted Solutions In Forums
    • Blogs
  • Information Category
    • Learn & Explore
  • Content Provider
    • Individual User
    • Autodesk
Showing 1-5 of 5 results for explode/1000 (0.21 seconds)
  • Once that capacitor is fully charged by the camera’s battery, all of that energy explodes outward in a blinding flash of light!
    Blogs | 2022-11-04
  • You have the option to use the clearance height this does come after the first X and Y move so you have to make sure you lift the Z axis up before you hit cycle start(you should always do this anyway) it gives you below. (1001) (Chuck Holder) (T1 D=13.208 CR=0 TAPER=30deg - ZMIN=4.804 - chamfer mill) G90 G94 G17 G21 (Engrave1) T1 S5000 M3 The call for spindle start G54 first offset G0 X-159.508 Y-109.884 first X and Y move Z22.7 First Z move Z17.7 G1 Z11.657 F 1000 for haveing G28 or G53 (1001) (Chuck Holder) (T1 D=13.208 CR=0 TAPER=30deg - ZMIN=4.804 - chamfer mill) G90 G94 G17 G21 G28 G91 Z0 Move the Z axis to its home postion G90 (Engrave1) T1 S5000 M3 spindle start G54 G0 X-159.508 Y-109.884 first X and Y move Z22.7 Z moves down to this hight Z17.7 G1 Z11.657 F 1000 You have to use one of them for the safty of the machine and you cutters can explode if they are slamed into something or it will eat the machine.
    Accepted Solutions In Forums | 2021-05-09
  • You have the option to use the clearance height this does come after the first X and Y move so you have to make sure you lift the Z axis up before you hit cycle start(you should always do this anyway) it gives you below. (1001) (Chuck Holder) (T1 D=13.208 CR=0 TAPER=30deg - ZMIN=4.804 - chamfer mill) G90 G94 G17 G21 (Engrave1) T1 S5000 M3 The call for spindle start G54 first offset G0 X-159.508 Y-109.884 first X and Y move Z22.7 First Z move Z17.7 G1 Z11.657 F 1000 for haveing G28 or G53 (1001) (Chuck Holder) (T1 D=13.208 CR=0 TAPER=30deg - ZMIN=4.804 - chamfer mill) G90 G94 G17 G21 G28 G91 Z0 Move the Z axis to its home postion G90 (Engrave1) T1 S5000 M3 spindle start G54 G0 X-159.508 Y-109.884 first X and Y move Z22.7 Z moves down to this hight Z17.7 G1 Z11.657 F 1000 You have to use one of them for the safty of the machine and you cutters can explode if they are slamed into something or it will eat the machine.
    Accepted Solutions In Forums | 2021-05-09
  • Capteurs tactiles capacitifs L’une des dernières avancées en matière d’applications des condensateurs est liée à l’ explosion des technologies d’écran tactile.
    Blogs | 2023-08-25
  • N35 G1 G41 X55.478 Y-62.5 F 1000 . N40 G1 X26.61 Y-12.5 N45 G1 X20.36 Y-1.675 N50 G1 X17.459 Y0.
    Accepted Solutions In Forums | 2019-12-16