To return to the folded model, click Finish Flat Pattern .

You can switch between the folded state and the flat pattern state with the Activate Flat Pattern radio button.

The sheet metal component returns to its folded state and you exit unfold mode.

The effect of the variation of injection pressure against injection time is two- fold : As the injection time increases from zero, the pressure to force the molten plastic through the part decreases.

They represent both folded sheet metal design and flat pattern.

Representation (sheet metal components only) Select an option to represent a sheet metal component. Folded Model: Uses the folded sheet metal model to generate the drawing views.

To add bends, create a sketch and position the sketch lines, exit the sketch, and use the Bend tool to fold the sheet metal body. The sketch lines must be planar to the stationary face of the flange to create bends on the sheet metal body.

Create drawing view that contains the folded sheet metal body and the flat pattern In the Create Drawing dialog, select Flat Pattern Representation, and click OK.

In the Drawing View dialog, click OK to apply the tool and close the dialog.Note: To add a representation of the folded body, click (Drawing Workspace > Create panel > Base View) and click on the drawing to place it.

These images preview the bends reliefs in both folded sheet metal design and flat pattern.

In the Document Settings of your drawing template, on the Automation Settings tab, you can set your preferred dimensioning strategy of these sheet types: Assembly Component Folded Component Flat Pattern Storyboard

There are 5 base view placeholder representations: Assembly Component Folded Component Flat Pattern Storyboard When you create a new drawing template, Fusion prompts you to place a base view placeholder.

Component: Creates a base view that represents a single component in the design assembly. Folded Component: Creates a base view that represents a folded sheet metal component.

Note: Self contact occurs when a body is highly deformable and folds onto itself. In this activity you: Generate contacts with sufficient friction to move the steel slab under the roller Review the contact conditions and suppress those that are unlikely to occur in this analysis, to reduce the solve time Review the set up pre-check to ensure the analysis is ready to solve Solve the analysis Review the results Prerequisites Activity 5 is complete.

Assembly Component Folded Component Flat Pattern Storyboard Adjust the Appearance settings: Orientation: Select one of the standard orthographic views or a named view.