Measure displays measurement values for distance, angle, area, arc radius and so on, for selected geometry.

Optional: at any time, click Clear Selection in the Measure dialog to clear selections and make new measurements .

Steps Use the Measure tool to compare the radii of the mating radii on the cross and rotor components.

In the Measure dialog, you can measure sketch geometry in the Sketch contextual environment in the Drawing workspace in Fusion.

In this tutorial, you practice measuring an assembly to ensure the assembly components will fit together as desired.

In this tutorial, you measured three areas on the assembly to ensure the assembly components fit together as desired.

But if your measuring instrument does not directly support such measurement , you can get Fusion to calculate the distance instead using other measurements .

Distance The distance is set to half of your design's depth by default, but you can type in any depth value. Measure Half Depth Click to go back to the default depth distance.

On the canvas, click the point from which you want to start the measurement . Press and hold the Shift key.

Click to specify the second point. Measurements display in the canvas. Press Enter or click Restart Selection to measure again.

On the sheet, select the rounded edge to measure . Move the mouse pointer to position the dimension.

On the sheet, select the rounded edge to measure . Move the mouse pointer to position the dimension.

Click to specify the second point. Measurements display in the canvas. Press Enter or click Restart Selection to measure again.

Learn how to use the Aligned Dimension tool in the Drawing workspace in Fusion to create dimensions that measure the precise distance between two points on a sheet.

It is common in a simulation to add probes are used to measure outputs at a specific point in the circuit.