The shoulder allows the part to go in to the axle nut and breaks it. It only needs to be pushed (hammered) in 10 mm or just till the teeth grab .

The shoulder allows the part to go in to the axle nut and breaks it. It only needs to be pushed (hammered) in 10 mm or just till the teeth grab .

And if you have 1000 screws you probably want to keep them in a folder.

And if you have 1000 screws you probably want to keep them in a folder.

If you are in Fabrication then you just need to know how many bolts, nuts and washers to order, you are not going to actually count them.

I've also noticed that if you insert a single nut , bolt, or washer, Fusion adds a joint in the timeline.

I've also noticed that if you insert a single nut , bolt, or washer, Fusion adds a joint in the timeline.

After exporting to Simplify the next export to STL is 1000 units even though nothing is changed from the first export.

After exporting to Simplify the next export to STL is 1000 units even though nothing is changed from the first export.

Have some components that were imported into F360 from an assembly STEP file. Have tried 1000 manipulations to export as STL four different bodies so as to be able to align them for 3d printing using Simplify3d.

Have some components that were imported into F360 from an assembly STEP file. Have tried 1000 manipulations to export as STL four different bodies so as to be able to align them for 3d printing using Simplify3d.

` Register for 9am PST | 12pm EST | 5pm BST Register for 10:00 am BST | 11:00am CEST | 2:30pm IST 10 Years of Designing Differently This year, 2023, Autodesk Fusion 360 is turning 10 years old.

Productivity has been enhanced in the construction of fastener stacks, now allowing for one-click placement of washers or nuts onto bolts. The content has also been expanded.

"Large" is over 300 components when you account for the screws, nuts , and washers. All joined accordingly.

"Large" is over 300 components when you account for the screws, nuts , and washers. All joined accordingly.