In the Form contextual environment in Fusion, you can create organic T-Spline designs with tools that are similar to sculpting clay. You can push and pull faces, edges, and vertices on T-Spline bodies.

In this tutorial, you: Create T-Spline forms using the Box and Revolve tools Create T-Spline forms using the Sweep and Loft tools Modify a T-Spline form Change the display mode and insert edges into a T-Spline form Prerequisites In the Data Panel, browse to the Samples section and open: Basic Training> 03 - Sculpting > 03_ Sculpting _Introduction.f3d

Prerequisites Basic Training> 03 - Sculpting > 03_ Sculpting _Introduction.f3d Steps In the Design workspace, on the Solid tab, select Create Form to access the Form tools.

Prerequisites Basic Training > 03 - Sculpting > 03_ Sculpting _Introduction.f3d Complete Activity 1: Create a T-Spline box and a T-Spline form using the Revolve tool Steps Hide the previously created Body 2 (1) and turn on the visibility of the sweep sketches.

When sculpting a shape with T-Splines it is helpful to have a reference image to guide you.

Prerequisites Basic Training > 03 - Sculpting > 03_ Sculpting _Introduction.f3d Complete Activity 1: Create a T-Spline box and a T-Spline form using the Revolve tool Complete Activity 2: Create T-Spline forms using the Sweep and Loft tools Steps Hide the previously created loft body, Body 4 (1), and turn on the visibility of the T-Spline box created in Activity 1.

Prerequisites Basic Training > 03 - Sculpting > 03_ Sculpting _Introduction.f3d Complete Activity 3: Modifying a T-Spline form Steps Change display mode from Smooth to Box to Control Frame and back to Box to compare the different modes.

Degree 3: Recommended for use in the sculpt environment. In the canvas, click to place the first end point of the spline.

A design is a 2D or 3D creation in Fusion that conveys the idea, part, or product you want to create.

Hello everyone, I've just started trying to use the forms feature to create a vacuum duct and am wondering if I am doing something wrong when trying to modify or manipulate the form.

Hello everyone, I've just started trying to use the forms feature to create a vacuum duct and am wondering if I am doing something wrong when trying to modify or manipulate the form.

- I want the inside of the ring to remain smooth, and also protect the outside circumference of the ring as I'm sculpting the sides. Can I fix or freeze some of the splines so that they remain uneffected by my sculpting actions?

- I want the inside of the ring to remain smooth, and also protect the outside circumference of the ring as I'm sculpting the sides. Can I fix or freeze some of the splines so that they remain uneffected by my sculpting actions?

I am trying to learn more about sculpting w/ Fusion360. I need to replicate a .stp file as a scultped file.

hi, im sculpting a Leaf, any ideas to make the upper lines (the veins) of the leaf?