Bounding box - Contains toolpaths within a box defined by the maximum extents of the part as viewed from the WCS. Bounding box Silhouette - Contains toolpaths within a boundary defined by the part shadow as viewed from the WCS.

Learn more about Drawings Automation. New Breakout Section Views Breakout Section Views allow you to create a partial section view of your model, showing the internal details of a specific region.

We’ve added 20 new fields, meticulously organized into three sections : Component, Project, and Summary.

Improved Performance of Section View Edits When editing a section view , choosing which “objects to cut” is significantly faster than before.

You can add a break to a base view , edit the break, and adjust the spacing between the two “halves” of your view .

New Flip option in Section Analysis tool We’ve added a new Flip option in the Section Analysis tool, to make it easier flip the section over the cut plane.

You had to ball-park where you were placing your Section View lines Now you can rely on where you snap and track along a non-ortho path to get your section view to look just right.

This guy knows his stuff, credited with over 1,000 inventions while still being a successful businessman (Image source) Edison was a household name back in the day, with over 1,000 inventions under his belt.

So a Haas NGC control is 1000 Blocks per second A Heidenhain TNC530/640 is 2000 blocks per second. yours might be 500- 1000 Hi Andrew, One last question regarding machine model setup: What is a normal number for the block processing speed?

Learn more about Properties and Parameters Anywhere. Improve View Quality for Shaded Views Models with a mix of long thin and thick parts can have shaded views that are a bit tessellated when zooming in.

Using two separate ground planes results in different references for sections of your circuit and increases the chance for interference.

Example: A target of boss of 1.000 ” measured at 1.001” would require an incremental adjustment of -0.001”.

The machine has been upgraded with two cutting-edge fiberSYS heads, supporting dual 1000 -watt lasers from IPG Photonics, along with a two-color pyrometer from Sensortherm.

The CAM Processor is highly flexible; you can change or update sections for required output specifications.

The bench pieces were too big for wax, so they used a Voxeljet 1000 3D printer to print sprues and gatings.