These object snaps are: Object Snaps Description Endpoint Specifies the end point of an edge.

Hold Ctrl (Windows) or Command (macOS) to lock to snap points or hold shift to hide snap points.

On the Sketch contextual tab, select Create > Circle > Center Rectangle . In the canvas, click to place the center point.

Click on the snap point that represents the center of the radius on the top of the grip.

For example, when slot is active, Center to Center , Center Point, and Overall are listed.

Tips As you move the mouse cursor, object snap symbols display near the geometry when you snap to the sketch grid or other geometry in the design.

You can use construction geometry and snap points to place the center of the circle.

To sketch the first circle, select Sketch > Circle > Center Diameter circle . Snap the center to the left-side end point of the horizontal line.

Show Layout Grid Check or uncheck the box to show or hide the layout grid in the canvas as you edit the sketch. Snap to Grid Check the box to snap to the layout grid in the canvas as you edit the sketch.

As you move the mouse cursor, object snap symbols display near the geometry when you snap to the sketch grid or other geometry in the design.

The sketch geometry snaps to align the centers at the same point.

Show Layout Grid Select or deselect the checkbox to show or hide the layout grid in the canvas as you create the sketch symbol. Snap to Grid Select the checkbox to snap to the layout grid in the canvas as you create the sketch symbol.

Linetype Select a linetype from the dropdown menu to change the linetype of new or selected title block geometry. Continuous Center 2 Hidden2 Phantom2 Hidden Center Lineweight Select a lineweight from the dropdown menu to change the lineweight of new or selected title block geometry. 0.13mm 0.18mm 0.25mm 0.35mm 0.5mm 0.7mm 1.0mm Display section The Display section contains the Show Border, Show Layout Grid, and Snap to Grid settings.

Linetype Select a linetype from the dropdown menu to change the linetype of new or selected border geometry. Continuous Center 2 Hidden2 Phantom2 Hidden Center Lineweight Select a lineweight from the dropdown menu to change the lineweight of new or selected border geometry. 0.13mm 0.18mm 0.25mm 0.35mm 0.5mm 0.7mm 1.0mm Display The Display section contains the Show Sheet, Show Layout Grid, and Snap to Grid settings.

Between Two Faces : Select Plane 1 and Plane 2 to center the joint origin between them, then select a Snap point.