Design > Solid > Create > Sweep Feature tab Select geometry and define the sweep settings.

Use the Sweep tool to sweep a sketch profile, planar face, or solid body along a path to create a swept solid body in Fusion.

Click Design > Surface > Create > Sweep . The Sweep dialog displays. On the Feature tab in the in the Sweep dialog, select one of the 3 Type settings: Single Path: Sweeps the selected profile along the path.

Learn how to use the Sweep tool to sweep a profile along a path to create a T-Spline body in Fusion.

In the Design workspace, click Create panel title bar > Sweep . In the Sweep dialog, from the Type drop-down list, select Path + Guide Rail.

Turn on the visibility for the Sweep Path and Sweep Profile sketches.

In this tutorial, you: Create bodies using sweep , extrude and revolve tools, from sketches.

A handle is formed, and the Sweep dialog changes. Enter these values in the Sweep dialog and click OK.

The sweep phase shift is delayed by reactive components in the circuit.

In the Simulation dialog, select the simulation type: Operating Point, DC Sweep , AC Sweep , or Transient. Set any other values for the simulation type, then click the Simulate button.

Square: Sweeps a square section profile along the path.

Square: Sweeps a square section profile along the coil path.

In this tutorial, you did the following: Created several bodies with the sweep , extrude and revolve tools.

Square: Sweeps a square section profile along the path.

If the geometry you're creating requires symmetry as you edit it, check Circular to embed symmetry into the body. Sweep The Sweep tool creates a T-Spline body by sweeping edges or sketch curves along a selected path.