Learn how to use the Offset Plane tool to create a construction plane at a specified distance from an existing face or plane in Fusion.

Tips Use Rounded Offset type to create a full or partial result that you can modify with surface tools .

Origin (absolute): absolute offset from the Origin that is defined in either the Setup or in Tool Orientation within the specific operation.

Learn how to use the Offset Face tool to shift faces on a solid body in a positive or negative direction in Fusion.

Learn how to use the Offset tool to offset sketch geometry to a specified distance in an active sketch in Fusion.

Chamfer Tip Offset This is added to the toolpath depth, while keeping the tool in contact with the selected edge by adjusting the toolpath radial offset .

Offset The Offset tool offsets sketch geometry a specified distance from the original geometry.

Post processor tab settings Parameter Explanation Number The number used to identify the tool in the NC program. Length offset The number used to identify the tool length offset in the NC program.

Negative offset No offset Positive offset Tool is offset inside Tool stays on the boundary Tool is offset outside To ensure that the edge of the tool overlaps the boundary, select the Outside tool containment method and specify a small positive value.

Origin (absolute): absolute offset from the Origin that is defined in either the Setup or in Tool Orientation within the specific operation.

Offset Face The Offset Face tool shifts faces on a solid body in a positive or negative direction.

Origin (absolute): absolute offset from the Origin that is defined in either the Setup or in Tool Orientation within the specific operation.

Origin (absolute): absolute offset from the Origin that is defined in either the Setup or in Tool Orientation within the specific operation.

You can create solid bodies from surface bodies by adding thickness to surfaces or by using cells to generate solid bodies in Fusion. The Thicken tool offsets one or more faces, surfaces, or quilts, and add sides to create a solid.

Negative offset with tool center on boundary No offset with tool center on boundary Positive offset with tool center on boundary To ensure that the edge of the tool overlaps the boundary, select the Outside tool containment method and specify a small positive value.