Thread reference

Thread adds internal or external threads to cylindrical geometry.

Design > Solid > Create > Thread

Threads can be cosmetic or modeled on the geometry.

Enables the selection of cylindrical faces to add threads to.

Specify whether the threads a cosmetic or modeled on the geometry.

Specify whether the threads run the entire length of the face.

Available when Full Length is disabled. Specify the position to start the threads.

Available when Full Length is disabled. Specify the length of the threads.

Select the type of threads to use.

Select the size thread.

Select the thread designation.

Select the thread class.

Specify to create right hand or left hand threads.

Select to remember the specified settings the next time the Thread tool is invoked.