Coil reference (Surface)

The Coil tool creates a surface body in the shape of a primitive coil in Fusion.

Design > Surface > Create > Coil

Type

Select the type of coil to create.

• Revolution And Height: Creates a coil with a specific number of revolutions and a specific height.
• Revolution And Pitch: Creates a coil with a specific number of revolutions and a specific pitch.
• Height And Pitch: Creates a coil with a specific height and a specific pitch.
• Spiral: Creates a coil in a spiral, using the same settings as the Revolution And Pitch coil type, without an Angle value.

Rotation

Click to switch the rotation of the coil from clockwise to counterclockwise, or vice versa.

Radius

Specify the radius of the coil from the center of the coil to the center of the profile.

Revolutions

Specify the number of revolutions the coil makes.

Height

Specify the height of the coil from the center of the profile at the start to the center of the profile at the end.

Pitch

Specify the elevation gain of each revolution of the helix.

Angle

Specify the taper angle for all coil types except spiral.

Section

Select the shape of the section profile.

• Circular: Sweeps a circular section profile along the coil path.
• Square: Sweeps a square section profile along the coil path.
• Triangular (External): Sweeps an equilateral triangular section profile along the coil path, pointed to the outside of the coil.
• Triangular (Internal): Sweeps an equilateral triangular section profile along the coil path, pointed to the inside of the coil.

Section Position

Specify the position of the section profile on the coil.

• Inside: Positions the section inside the coil diameter.
• On Center: Centers the section on the coil diameter.
• Outside: Positions the section outside the coil diameter.

Section Size

Specify the diameter of the section profile. The size of the profile is determined by a circumscribed sketch circle.

Operation

Select an operation to control how the feature affects the design.

• New Body: Creates a new body in the active component.
• New Component: Creates a new body in a new component.