About Exchanging Data Between AutoCAD Civil 3D and Autodesk InfraWorks 360

You can bring Autodesk InfraWorks 360 data into AutoCAD Civil 3D by referencing a local InfraWorks 360 model or an IMX file that was exported from InfraWorks 360. You can bring AutoCAD Civil 3D data into InfraWorks 360 by linking to an AutoCAD Civil 3D DWG file as a data source.

Data Exchange Workflow

You can complete your conceptual design with InfraWorks 360 and then bring the InfraWorks 360 model into AutoCAD Civil 3D to complete the detailed design. When you want to refer to the updated design from within InfraWorks 360, you can link to the AutoCAD Civil 3D drawing as a data source.

Alternatively, you can start your project in AutoCAD Civil 3D and then bring it into InfraWorks 360 when you want to create a design presentation.

Use InfraWorks 360 to complete your conceptual design	Design road created in InfraWorks 360
Open the model in AutoCAD Civil 3D and select the data to bring into AutoCAD Civil 3D	Alignment created when the InfraWorks 360 design road is brought into AutoCAD Civil 3D
Use AutoCAD Civil 3D to complete your detailed design	Corridor and corridor top surface created in AutoCAD Civil 3D from the alignment and profile
Open the AutoCAD Civil 3D drawing in InfraWorks 360 and configure the data	Terrain modeling created when the AutoCAD Civil 3D corridor surface is brought into InfraWorks 360 Coverages created when the AutoCAD Civil 3D link styles that are used in the corridor are brought into InfraWorks 360 For more information about how to bring an AutoCAD Civil 3D drawing into InfraWorks 360, see About Exchanging Data with AutoCAD Civil 3D and To Add AutoCAD Civil 3D Data to an InfraWorks model.

Application Requirements

You do not need to have Autodesk InfraWorks 360 installed on the same computer as AutoCAD Civil 3D in order bring InfraWorks 360 data into AutoCAD Civil 3D. However, the option to open a local InfraWorks 360 model (SQLITE file) is only available if you have InfraWorks 360 installed on the same computer. If InfraWorks 360 is not installed, you can bring InfraWorks 360 data into AutoCAD Civil 3D using an IMX file that was exported from InfraWorks 360.

Within InfraWorks 360, the option to use a local AutoCAD Civil 3D DWG is available if AutoCAD Civil 3D is installed on the same computer as InfraWorks 360. If AutoCAD Civil 3D is not installed, you can reference an AutoCAD Civil 3D DWG from the cloud.

Coordinate Systems and Units

When preparing to exchange objects between an InfraWorks 360 model and an AutoCAD Civil 3D drawing, it is recommended that you use the following guidelines when setting coordinate systems and units:

• Set a UCS in the InfraWorks 360 model that is compatible with the coordinate system that will be used in the AutoCAD Civil 3D drawing. By default, InfraWorks 360 models that are created with the Model Builder use the LL84 coordinate system, which is not supported in AutoCAD Civil 3D. If the AutoCAD Civil 3D drawing does not have a coordinate system specified, or if the coordinate systems are not compatible, you can set or change the drawing coordinate system when you open the InfraWorks 360 model in AutoCAD Civil 3D. The AutoCAD Civil 3D drawing must have a coordinate system specified in order to bring in InfraWorks 360 data.
• If you export an IMX file from InfraWorks 360 to be used in AutoCAD Civil 3D, it is recommended that you specify a target coordinate system for the IMX file that is the same coordinate system that will be used in the AutoCAD Civil 3D drawing.
• Use the same unit type in both the InfraWorks 360 model and in the AutoCAD Civil 3D drawing. By default, InfraWorks 360 models use metric units. When you set up an object settings file in AutoCAD Civil 3D, ensure that the part catalogs that you specify for planning utilities and drainage networks have the same units that are used in the InfraWorks 360 model.

Object Settings

An object settings file specifies what types of InfraWorks 360 objects will be brought into AutoCAD Civil 3D and also specifies settings for the objects. You can set up multiple files to handle different scenarios.

Pre-defined object settings files are provided in the following folders:

• C:\ProgramData\Autodesk\C3D 2016\enu\Data\InfraWorks Object Settings\Metric
• C:\ProgramData\Autodesk\C3D 2016\enu\Data\InfraWorks Object Settings\Imperial

The following pre-defined object settings files are provided:

• All Objects.xml: Brings in all types of InfraWorks 360 objects
• Design Objects.xml: Brings in only InfraWorks 360 design objects
• Planning Objects.xml: Brings in only InfraWorks 360 planning objects

InfraWorks 360 Data that Can Be Brought Into AutoCAD Civil 3D

The following table lists what types of InfraWorks 360 model objects can be brought into AutoCAD Civil 3D and what types of AutoCAD Civil 3D drawing objects they become.

InfraWorks 360 Model Objects	AutoCAD Civil 3D Drawing Objects	Data Exchange Notes
Terrain surfaces	TIN surfaces	Terrain surfaces are brought into AutoCAD Civil 3D as AIW_Existing_Ground, AIW_Existing_Transportation, and AIW_Proposed_Ground.
Planning utilities	Pipe networks (Utility Type = Undefined)	Planning utilities in InfraWorks 360 are pipelines with generic pipeline connectors (instead of inlets or manholes) and have an undefined Utility Type. A new property called Utility Type has been added to pipe networks in AutoCAD Civil 3D and this property is set to Undefined for planning utilities that are brought into AutoCAD Civil 3D from InfraWorks 360. All pipes are created using the first part in the selected pipe catalog. All structures are created as null structures.
Planning roads	Alignments	Planning roads are roads that are created with the Add Roads tool in InfraWorks 360, or are created when data that reflects existing conditions is brought into a model.
Design roads	Alignments, finished ground profiles, existing ground profiles (optional)	Design roads are roads that are created with Roadway Design for InfraWorks 360. The option to create existing ground surface profiles is specified in the object settings file.
Intersections	Intersections with curb return alignments	InfraWorks 360 intersections are converted into static curb return alignments in AutoCAD Civil 3D instead of intersections in the following situations: If the intersection contains more than four legs If the intersection uses the Simple Curve with Taper curb return If the centerlines of a T-shaped intersection do not actually intersect If the offsets that are on the same side of a road in the intersection are not equal, such as in the following illustration, where offset 1 is wider than offset 2:
Drainage networks	Pipe networks (Utility Type = Drainage)	Drainage networks in InfraWorks 360 are pipelines with inlets and manholes instead of generic pipeline connectors and have a Utility Type of Drainage. A new property called Utility Type has been added to pipe networks in AutoCAD Civil 3D and this property is set to Drainage for drainage networks that are brought into AutoCAD Civil 3D from InfraWorks 360. Manholes are assigned a Cover property and inlets are assigned a Grate property in the AutoCAD Civil 3D structure properties. A new part catalog has been included in AutoCAD Civil 3D for use when you bring InfraWorks 360 inlets and manholes into AutoCAD Civil 3D. Inlet and manhole structures will use the equivalent parts in the imperial or metric version of this new catalog. Pipes will use the closest matching pipe shape, material, and size from the specified pipe catalog. A pipe network part list named Import is created when the InfraWorks 360 model is opened in AutoCAD Civil 3D. This parts list contains only the parts that are needed. For an overview of the data exchange process for drainage networks, please see the Drainage Design Update video playlist in the InfraWorks 360 Help.
Coverages (terrain modifying)	3D polylines	Only the coverages that modify the InfraWorks 360 terrain are included.
Water areas	3D polylines
Bridges	3D solids	For an overview of the data exchange process for bridges, please see the Bridge Design Update video playlist in the InfraWorks 360 Help.

Note: Alignments that are created in AutoCAD Civil 3D from InfraWorks 360 data are not assigned to a site.

AutoCAD Civil 3D Data that Can Be Brought Into InfraWorks 360

The following table lists what types of AutoCAD Civil 3D drawing objects can be brought into InfraWorks 360 and what types of model objects they become.

AutoCAD Civil 3D Drawing Object	InfraWorks 360 Model Object	Data Exchange Notes
TIN surfaces	Terrain surfaces	Each surface will be listed in the Data Sources panel in InfraWorks 360. If a surface that you bring into InfraWorks 360 obscures other surfaces, you can adjust the order of the terrain surface layers by using the Surface Layers dialog box, which you can access from the Data Sources panel.
Alignments and profiles	Design roads (horizontal and vertical geometry)	Only Centerline type alignments can be brought into InfraWorks 360 as design roads. You can import a set of style rules in InfraWorks 360 to use for default AutoCAD Civil 3D alignment styles. If you use custom alignment styles, you may need to create create style rules. A single profile is used in InfraWorks 360 for each design road. The first finished ground profile that was created in the AutoCAD Civil 3D drawing is used. You can use the Profile View tool in InfraWorks 360 to review the profile geometry. The design roads that are created in InfraWorks 360 from AutoCAD Civil 3D objects may be read-only. Best fit profile entities are not brought into InfraWorks 360.
Corridors and corridor surfaces	Coverages and terrain surfaces	To visualize corridors properly in InfraWorks 360, it is recommended that you create one or more corridor surfaces in AutoCAD Civil 3D to bring into InfraWorks 360 (for example, a surface that represents the top of the corridor). The corridor surface is what models the ground in InfraWorks 360. AutoCAD Civil 3D link styles are used to create coverages in InfraWorks 360, which show the materials of the corridor. The coverages allow you to stylize the different corridor components like pavement. You can import a set of style rules in InfraWorks 360 to use for default AutoCAD Civil 3D link styles. If you use custom link styles, you may need to create create style rules.
Pipe networks	Pipelines with inlets and manholes or pipeline connectors	If a structure in the AutoCAD Civil 3D drawing has a Utility Type of Drainage specified, and it uses a part from the new part catalog, then it will be assigned a part from the new part catalog when it is brought back into InfraWorks 360. If the Part Family and Size IDs match a part within the InfraWorks 360 part catalog, then the same exact part will be used.  If the Part Family and Size IDs do not match a part within the InfraWorks 360 part catalog, then a default part will be used (the first manhole part found). Important: If are using parts from the new catalog in both InfraWorks 360 and AutoCAD Civil 3D for pipeline connectors/structures, and the network has a Utility Type of Drainage, the same part will be used in both applications. If a structure in the AutoCAD Civil 3D drawing does not have a Utility Type of Drainage specified, then the part will be created as a generic pipeline connector.