MFnMesh Class Reference

#include <MFnMesh.h>

Class Description

Polygonal surface function set.

Note on Terminology: The following terms are used interchangeably:

• mesh and object,
• polygon and face,
• object-relative indices and global/mesh-relative indices,
• face-relative indices and local indices

object-relative indices - they range between 0..(numVertices()-1)

face-relative indices - they range between 0..(polygonVertexCount(faceId)-1)

This function set provides access to polygonal meshes. Objects of type MFn::kMesh, MFn::kMeshData, and MFn::kMeshGeom are supported. MFn::kMesh objects are shapes in the DAG, MFn::kMeshGeom objects are the raw geometry that the shapes use, and MFn::kMeshData objects are the data that is passed through dependency graph connections.

NOTE: If the function set has been initialized with a MFn::kMesh object then it must have geometry attached.

Mesh Construction Meshes are created by specifying a vertex list, a list of vertex counts per-polygon, and a list of vertices that make up the polygons. Edge data is also maintained for the mesh and can be returned to the caller. The following lists are used by the create method to construct a mesh:

• vertex list All of the vertices for the mesh are stored in a master vertex list which is an array indexed from 0 to numVertices()-1. Vertices in this list can be shared among polygons.

• polygon count list This is a list containing the number of vertices for each polygon. Each polygon in the mesh would have an entry in this list containing its number of vertices.

• vertex connection list This is a list of the vertex id's for each polygon. Since polygons can have different numbers of vertices, the polygon count list is used to determine which polygons are represented by the various sections of this list.

There are several cases in which the create method will alter the data passed in:

• If the data for the mesh is provided in such a way that the verticies for some polygons are specified in a clockwise direction, and others in a counter-clockwise direction, the edges between neighboring polygons with reversed orderings will be duplicated. In this context, "duplicating an edge" means that copies will be made of the edge's vertices and the index list for the adjoining polygons will be redefined to

use the appropriate vertices.

• If the vertex connection list for a polygon specifies an edge with the same start and end verticies, those edges will be removed. (ie. a polygon specified as 1 2 2 3 4 will be transformed into 1 2 3 4).

• If the same vertex appears in the vertex connection list for a polygon more than once, another vertex will be created at the same location, and the list will be altered to use the copy. (ie. a polygon specified as 1 2 3 1 4 will be transformed into 1 2 3 5 4, where 5 is in the same location as 1).

Texture Coordinates (UV's) You can optionally specify texture (uv) coordinates. UV coordinates are 2-d coordinates used for mapping textures to the polygons of a mesh. All of the uv coordinates are stored in one or more named UV sets. The default mesh uv list stores uv coordinates in an array indexed from 0 to numUVs()-1. UV's are referenced on a per-polygon per-vertex basis, so for a polygon with 4 vertices there would be 4 uv's. The uv values for a polygon are set by specifying the index of the uv for each vertex of the polygon. This index is the uv's position in the master uv array. UV's are optional so polygons do not have to have uv values associated with them. There may be only 1 or 2 polygons in a mesh that have uv coordinates set, or all of the polygons may have uv's. UV's can also be shared so several different polygons may reference the same uv's. If you are creating a UV for the first time or changing the order of the UV then you need to set the UV using one of the setUV methods and then assign new indices using one of the assignUV methods. It is not necessary to call assignUV if editing the position of an existing UV.

Color per vertex You can optionally specify color per vertex information using this class. It is possible to create and manipulate color per vertex information using the methods available. Many of the color per vertex methods have a default parameter: colorSet. If unspecified, the method will operate on the current color set.

Normals Some of the Normals in Maya are now user-settable. If the vertex normals are not set or locked, they are computed by maya when the mesh changes. If set or locked, the normals remain frozen relative to the object, unless the user unlocks them. There are 3 types of normals for a mesh:

• Per-vertex per-polygon Polygonal objects store a list of per-vertex per-polygon normals (similar to the vertex list) This list is what is returned by MFnMesh::getNormals and MItMeshPolygon::getNormal(index, normal). As well, MItMeshPolygon::normalIndex( vertexIndex ) returns the index into the normal list for a particular vertex of the polygon.

For a cube, the list would contain 24 normals (4 vertices * 6 polygons) since the edges for a cube are hard and the per-vertex per-polygon normals cannot be shared. For a sphere or torus, which has smooth edges, the normals can be shared, and thus the normal list contains the same number of normals as vertices.

• Per-polygon normals Polygonal objects store a normal for each polygon. These normals can be accessed via MItMeshPolygon::getNormal(normal) or MFnMesh::getPolygonNormal. So, a cube, which is comprised of 6 polygons would contain 6 such normals.

• Per-vertex You can also access a normal for each vertex of the mesh, independent of any polygons. Such normals are not stored in the object, but instead are calculated by Maya upon request as the average of all the per-polygon normals for the polygons adjacent to the vertex. These normals are what is returned by MFnMesh::getVertexNormal or MItMeshVertex::getNormal.

Blind Data MFnMesh allows you to create Blind Data types, and to create and access mesh component level blind data, but not object level blind data. Object level data may be assigned through the polyBlindData command or the Blind Data Editor. However, object level blind data is just an ordinary compound dynamic attribute directly on the object. The parent attribute name is BlindDataNNNN where NNNN is the blind data typeID. e.g. if your typeId is 1001 your object will have a compound dynamic attr called BlindData1001.

Handling Components There are also three iterator classes which provide more specific control over the vertices, edges, and polygons of a mesh and are useful when dealing with components. See MItMeshPolygon, MItMeshEdge, and MItMeshVertex.

Examples:

Inheritance diagram for MFnMesh:

Public Types
enum	MColorRepresentation { kAlpha = 1, kRGB = 3, kRGBA = 4 }
	Specifies which color components are used by a colorSet. More...
enum	SplitPlacement { kOnEdge, kInternalPoint, kInvalid }
	Specifies how a point along split is to be determined. More...
enum	BoolOperation { kUnion = 1, kDifference, kIntersection }
	Boolean operators. More...
Public Types inherited from MFnDagNode
enum	{ kNextPos = 0xff }
	Anonymous enum to store constant values. More...
enum	MObjectColorType { kUseDefaultColor = 0, kUseIndexColor, kUseRGBColor }
	Enum to set how an object is colored. More...
Public Types inherited from MFnDependencyNode
enum	MAttrClass { kLocalDynamicAttr = 1, kNormalAttr, kExtensionAttr, kInvalidAttr }
	Specifies the scope of the attribute. More...
enum	MdgTimerState { kTimerOff, kTimerOn, kTimerUninitialized, kTimerInvalidState }
	Possible states for the node's timer. More...
enum	MdgTimerMetric {   kTimerMetric_callback, kTimerMetric_compute, kTimerMetric_dirty, kTimerMetric_draw,   kTimerMetric_fetch, kTimerMetric_callbackViaAPI, kTimerMetric_callbackNotViaAPI, kTimerMetric_computeDuringCallback,   kTimerMetric_computeNotDuringCallback, kTimerMetrics }
	The different timer metrics which can be queried. More...
enum	MdgTimerType { kTimerType_self, kTimerType_inclusive, kTimerType_count, kTimerTypes }
	The types of timers which can be queried. More...

Public Member Functions
virtual MFn::Type	type () const
	Function set type. More...
virtual	~MFnMesh ()
	Destructor. More...
	MFnMesh ()
	Default constructor.
	MFnMesh (MObject &object, MStatus *ReturnStatus=NULL)
	Constructor. More...
	MFnMesh (const MDagPath &object, MStatus *ret=NULL)
	Constructor. More...
MObject	create (int numVertices, int numPolygons, const MFloatPointArray &vertexArray, const MIntArray &polygonCounts, const MIntArray &polygonConnects, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	Creates a new polygonal mesh given an array of vertices and polygon connection information and sets this function set to operate on the new surface. More...
MObject	create (int numVertices, int numPolygons, const MPointArray &vertexArray, const MIntArray &polygonCounts, const MIntArray &polygonConnects, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	Creates a new polygonal mesh given an array of vertices and polygon connection information and sets this function set to operate on the new surface. More...
MObject	create (int numVertices, int numPolygons, const MPointArray &vertexArray, const MIntArray &polygonCounts, const MIntArray &polygonConnects, bool storeDoubles, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	Creates a new polygonal mesh given an array of vertices and polygon connection information and sets this function set to operate on the new surface. More...
MObject	create (int numVertices, int numPolygons, const MFloatPointArray &vertexArray, const MIntArray &polygonCounts, const MIntArray &polygonConnects, const MFloatArray &uArray, const MFloatArray &vArray, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	Creates a new polygonal mesh given an array of vertices, polygon connection information, UV information, and sets this function set to operate on the new surface. More...
MObject	create (int numVertices, int numPolygons, const MPointArray &vertexArray, const MIntArray &polygonCounts, const MIntArray &polygonConnects, const MFloatArray &uArray, const MFloatArray &vArray, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	Creates a new polygonal mesh given an array of vertices, polygon connection information, UV information, and sets this function set to operate on the new surface. More...
MObject	generateSmoothMesh (MObject parentOrOwner=MObject::kNullObj, MMeshSmoothOptions *options=NULL, MStatus *ReturnStatus=NULL)
	Creates a new polygonal mesh using either the Smooth Mesh Preview attributes of this mesh or a set of options specified in an MMeshSmoothOptions object. More...
MStatus	getSmoothMeshDisplayOptions (MMeshSmoothOptions &options) const
	Retrieve the current display smoothing options for the mesh. More...
MStatus	setSmoothMeshDisplayOptions (const MMeshSmoothOptions &options)
	Sets the current display smoothing options for the mesh. More...
MObject	addPolygon (const MPointArray &vertexArray, bool mergeVertices=true, double pointTolerance=kMFnMeshPointTolerance, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	Adds a new polygon to this polygonal mesh. More...
MObject	addPolygon (const MPointArray &vertexArray, int &faceIndex, bool mergeVertices=true, double pointTolerance=kMFnMeshPointTolerance, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	Adds a new polygon to this polygonal mesh. More...
MObject	addPolygon (const MPointArray &vertexArray, const MIntArray &loopCounts, int &faceIndex, bool mergeVertices=true, double pointTolerance=kMFnMeshPointTolerance, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	Adds a new polygon to this polygonal mesh. More...
MStatus	addHoles (int faceIndex, const MPointArray &vertexArray, const MIntArray &loopCounts, bool mergeVertices=true, double pointTolerance=kMFnMeshPointTolerance)
	Adds holes to a mesh polygon. More...
MStatus	deleteFace (int index, MDGModifier *modifier=NULL)
	Delete this face. More...
MStatus	deleteEdge (int index, MDGModifier *modifier=NULL)
	Delete this edge. More...
MStatus	deleteVertex (int index, MDGModifier *modifier=NULL)
	Delete this vertex. More...
MStatus	split (MIntArray &placements, MIntArray &edgeList, MFloatArray &edgeFactors, MFloatPointArray &internalPoints)
	This function splits a set of edges and faces in a continuous manner. More...
MStatus	subdivideFaces (MIntArray &faceList, int divisionCount)
	This function subdivides multiple faces. More...
MStatus	subdivideEdges (MIntArray &edgeList, int divisionCount)
	This function subdivides edges at regular intervals. More...
MStatus	extrudeFaces (MIntArray &faceList, int extrusionCount, MFloatVector *translation, bool extrudeTogether, float thickness=0.0f, float offset=0.0f)
	This function extrudes a set of faces. More...
MStatus	extrudeEdges (MIntArray &edgeList, int extrusionCount, MFloatVector *translation, bool extrudeTogether, float thickness=0.0f, float offset=0.0f)
	This function extrudes edges. More...
MStatus	duplicateFaces (MIntArray &faceList, MFloatVector *translation)
	This function duplicates a set of faces and detaches them from the rest of the mesh. More...
MStatus	extractFaces (MIntArray &faceList, MFloatVector *translation)
	This function detaches a set of faces from the mesh so that the resulting mesh will contain one more independant piece of geometry and leaves a hole where the faces use to be. More...
MStatus	collapseFaces (MIntArray &faceList)
	This function collapse faces into vertices. More...
MStatus	collapseEdges (MIntArray &edgeList)
	This function collapse edges into vertices. More...
int	numVertices (MStatus *ReturnStatus=NULL) const
	Returns the number of vertices in the vertex list for this mesh. More...
int	numEdges (MStatus *ReturnStatus=NULL) const
	Returns the number of edges for this mesh. More...
int	numPolygons (MStatus *ReturnStatus=NULL) const
	Returns the number of polygons for this mesh. More...
int	numFaceVertices (MStatus *ReturnStatus=NULL) const
	Returns the number of face-vertices for this mesh. More...
int	polygonVertexCount (int polygonId, MStatus *ReturnStatus=NULL) const
	Returns the number of vertices for the specified polygon. More...
int	numUVs (MStatus *ReturnStatus=NULL) const
	Returns the number of texture (uv) coordinates for this mesh. More...
int	numUVs (const MString &uvSet, MStatus *ReturnStatus=NULL) const
	Returns the number of texture (uv) coordinates for this mesh. More...
int	numColors (MStatus *ReturnStatus=NULL) const
	Returns the number of (vertex) color for this mesh. More...
int	numColors (const MString &colorSet, MStatus *ReturnStatus=NULL) const
	Returns the number of colors (vertex data) for this mesh. More...
int	numNormals (MStatus *ReturnStatus=NULL) const
	Returns the number of per-polygon per-vertex normals for this mesh. More...
bool	hasColorChannels (const MString &colorSet, MStatus *ReturnStatus=NULL) const
	This method returns if the color set has RGB components. More...
bool	hasAlphaChannels (const MString &colorSet, MStatus *ReturnStatus=NULL) const
	This method returns true if the color set has Alpha component. More...
MColorRepresentation	getColorRepresentation (const MString &colorSet, MStatus *ReturnStatus=NULL) const
	This method returns the color representation (RGB/RGBA/A) of a color set. More...
bool	isColorClamped (const MString &colorSet, MStatus *ReturnStatus=NULL) const
	This method returns if the color set has its R,G,B,and A components clamped in the range from 0 to 1. More...
MStatus	setIsColorClamped (const MString &colorSet, bool clamped)
	Set the color set to be clamped. More...
MStatus	getTriangles (MIntArray &triangleCounts, MIntArray &triangleVertices) const
	Returns the number of triangles for every polygon face and the vertex Ids of each triangle vertex. More...
MStatus	getTriangleOffsets (MIntArray &triangleCounts, MIntArray &triangleIndices) const
	Returns the number of triangles for every polygon face and the offset into the vertex indices array for each triangle vertex (see getVertices()). More...
MStatus	booleanOp (BoolOperation op, MFnMesh &mesh1, MFnMesh &mesh2)
	This method is obsolete. More...
MStatus	booleanOps (BoolOperation op, const MObjectArray &meshes, bool useLegacy=false)
	Computes the boolean between multiple meshes. More...
bool	closestIntersection (const MFloatPoint &raySource, const MFloatVector &rayDirection, const MIntArray *faceIds, const MIntArray *triIds, bool idsSorted, MSpace::Space space, float maxParam, bool testBothDirections, MMeshIsectAccelParams *accelerator, MFloatPoint &hitPoint, float *hitRayParam, int *hitFace, int *hitTriangle, float *hitBary1, float *hitBary2, float tolerance=1e-6, MStatus *ReturnStatus=NULL)
	Finds the closest intersection of a ray starting at raySource and travelling in rayDirection with the mesh. More...
bool	anyIntersection (const MFloatPoint &raySource, const MFloatVector &rayDirection, const MIntArray *faceIds, const MIntArray *triIds, bool idsSorted, MSpace::Space space, float maxParam, bool testBothDirections, MMeshIsectAccelParams *accelerator, MFloatPoint &hitPoint, float *hitRayParam, int *hitFace, int *hitTriangle, float *hitBary1, float *hitBary2, float tolerance=1e-6, MStatus *ReturnStatus=NULL)
	Finds any intersection of a ray starting at raySource and travelling in rayDirection with the mesh. More...
bool	allIntersections (const MFloatPoint &raySource, const MFloatVector &rayDirection, const MIntArray *faceIds, const MIntArray *triIds, bool idsSorted, MSpace::Space space, float maxParam, bool testBothDirections, MMeshIsectAccelParams *accelerator, bool sortHits, MFloatPointArray &hitPoints, MFloatArray *hitRayParams, MIntArray *hitFaces, MIntArray *hitTriangles, MFloatArray *hitBary1, MFloatArray *hitBary2, float tolerance=1e-6, MStatus *ReturnStatus=NULL)
	Finds all intersections of a ray starting at raySource and travelling in rayDirection with the mesh. More...
MStatus	sortIntersectionFaceTriIds (MIntArray *faceIds, MIntArray *triIds)
	Convenience routine for sorting faceIds or face/triangle ids before passing them into the closestIntersection(), allIntersections(), or anyIntersection() methods. More...
MStatus	freeCachedIntersectionAccelerator ()
	If the mesh has a cached accelerator structure, then this routine forces it to be deleted. More...
MString	cachedIntersectionAcceleratorInfo (MStatus *ReturnStatus=NULL)
	Retrieves a string that describes the intersection acceleration structure for this object, if any. More...
bool	intersect (const MPoint &raySource, const MVector &rayDirection, MPointArray &points, double tolerance=kMFnMeshPointTolerance, MSpace::Space space=MSpace::kObject, MIntArray *polygonIds=NULL, MStatus *ReturnStatus=NULL) const
	Determines whether the given ray intersects this polygon and if so, returns the points of intersection. More...
MStatus	getClosestPointAndNormal (const MPoint &toThisPoint, MPoint &theClosestPoint, MVector &theNormal, MSpace::Space space=MSpace::kObject, int *closestPolygon=NULL, MMeshIsectAccelParams *accelParams=NULL) const
	Returns the closest point on this surface to the given point. More...
MStatus	getClosestPoint (const MPoint &toThisPoint, MPoint &theClosestPoint, MSpace::Space space=MSpace::kObject, int *closestPolygon=NULL, MMeshIsectAccelParams *accelerator=NULL) const
	Returns the closest point on this surface to the given point. More...
MStatus	getClosestNormal (const MPoint &toThisPoint, MVector &theNormal, MSpace::Space space=MSpace::kObject, int *closestPolygon=NULL, MMeshIsectAccelParams *accelerator=NULL) const
	Returns the closest point on this surface to the given point. More...
MStatus	getClosestUVs (const float2 &toThisUVPoint, MIntArray &uvIds, const MString *uvSet=NULL) const
	Returns the IDs of the UVs on this surface which are nearest in uv space to the given uv set and coordinate. More...
MStatus	getConnectedShaders (unsigned int instanceNumber, MObjectArray &shaders, MIntArray &indices) const
	Returns all the shaders (sets) connected to the specified instance of this mesh, as well as an array of polygon/shader assignments. More...
MObject	copy (const MObject &source, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	This method creates a copy of a given source mesh. More...
MStatus	updateSurface ()
	Signal that this polygonal mesh has changed and needs to redraw itself. More...
MStatus	syncObject ()
	If a non-api operation happens that many have changed the underlying Maya object wrapped by this api object, make sure that the api object references a valid maya object. More...
const float *	getRawPoints (MStatus *) const
	This method returns a pointer to the internal vertex list for this mesh. More...
const double *	getRawDoublePoints (MStatus *) const
	This method returns a pointer to the internal vertex list for this mesh. More...
const float *	getRawNormals (MStatus *) const
	This method returns a pointer to the internal normal list for this mesh. More...
MStatus	getPoints (MFloatPointArray &vertexArray, MSpace::Space space=MSpace::kObject) const
	This method copies the vertex list for this mesh into the given point array. More...
MStatus	getPoints (MPointArray &vertexArray, MSpace::Space space=MSpace::kObject) const
	This method copies the vertex list for this mesh into the given point array. More...
MStatus	setPoints (MFloatPointArray &vertexArray, MSpace::Space space=MSpace::kObject)
	This method copies the points in the given point array to the vertices of this polygon. More...
MStatus	setPoints (MPointArray &vertexArray, MSpace::Space space=MSpace::kObject)
	This method copies the points in the given point array to the vertices of this mesh. More...
MStatus	getVertices (MIntArray &vertexCount, MIntArray &vertexList) const
	This method retrieves the object-relative (mesh-relative/global) vertex indices for all polygons. More...
MStatus	getPolygonVertices (int polygonId, MIntArray &vertexList) const
	This method retrieves the object-relative (mesh-relative/global) vertex indices for the specified polygon. More...
MStatus	getPolygonTriangleVertices (int polygonId, int triangleId, int triangleVertices[3]) const
	This method retrieves the object-relative (mesh-relative/global) vertex indices for the specified triangle in the specified polygon. More...
MStatus	setPoint (int vertexId, const MPoint &pos, MSpace::Space space=MSpace::kObject)
	Sets the position of specified vertex in the vertex list for this mesh. More...
MStatus	getPoint (int vertexId, MPoint &pos, MSpace::Space space=MSpace::kObject) const
	Get the position of the specified vertex in this mesh's vertex list. More...
MStatus	getNormals (MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject) const
	This method copies the normal list for this mesh into the given array. More...
MStatus	setNormals (MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject)
	Set the normal array (user normals) More...
MStatus	getFaceVertexNormal (int faceIndex, int vertexIndex, MVector &normal, MSpace::Space space=MSpace::kObject) const
	Return a per-vertex-per-face normal for a given face (polygon) and given vertex. More...
MStatus	getFaceVertexNormals (int faceIndex, MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject) const
	Return all per-vertex-per-face normals for a given face. More...
MStatus	getNormalIds (MIntArray &normalIdCounts, MIntArray &normalIds) const
	Return normal indices for all vertices for a all faces. More...
MStatus	getFaceNormalIds (int faceIndex, MIntArray &normals) const
	Return normal indices for all vertices for a given face. More...
MStatus	setFaceVertexNormal (MVector &normal, int faceIndex, int vertexIndex, MSpace::Space space=MSpace::kObject, MDGModifier *modifier=NULL)
	Set Normal for this face/vertex pair. More...
MStatus	setVertexNormal (MVector &normal, int vertexIndex, MSpace::Space space=MSpace::kObject, MDGModifier *modifier=NULL)
	Set Shared Normal for this vertex. More...
MStatus	setFaceVertexNormals (MVectorArray &normalArray, MIntArray &faceList, MIntArray &vertexList, MSpace::Space space=MSpace::kObject)
	Set Normals for the given face/vertex pairs. More...
MStatus	setVertexNormals (MVectorArray &normalArray, MIntArray &vertexList, MSpace::Space space=MSpace::kObject)
	Set Shared Normals for these vertices. More...
MStatus	getVertexNormal (int vertexId, MVector &normal, MSpace::Space space=MSpace::kObject) const
	This method is obsolete. More...
MStatus	getVertexNormal (int vertexId, bool angleWeighted, MVector &normal, MSpace::Space space=MSpace::kObject) const
	Return the normal at the given vertex. More...
MStatus	getVertexNormals (bool angleWeighted, MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject) const
	Return all vertex normals. More...
MStatus	getPolygonNormal (int polygonId, MVector &normal, MSpace::Space space=MSpace::kObject) const
	Return the normal at the given polygon. More...
bool	isNormalLocked (int normalId, MStatus *ReturnStatus=NULL) const
	Test if the normal for a face/vertex pairs is locked (user defined). More...
MStatus	lockVertexNormals (MIntArray &vertexList)
	Lock Shared Normals for these vertices. More...
MStatus	lockFaceVertexNormals (MIntArray &faceList, MIntArray &vertexList)
	Lock Normals for these face/vertex pairs. More...
MStatus	unlockVertexNormals (MIntArray &vertexList)
	Unlock Shared Normals for these vertices. More...
MStatus	unlockFaceVertexNormals (MIntArray &faceList, MIntArray &vertexList)
	Unlock Normals for these face/vertex pairs. More...
int	getTangentId (int faceIndex, int vertexIndex, MStatus *ReturnStatus=NULL) const
	Return the tangent index for a given face vertex. More...
MStatus	getTangents (MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL) const
	Return the tangent vectors for all face vertices. More...
MStatus	getFaceVertexTangent (int faceIndex, int vertexIndex, MVector &tangent, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL) const
	Return the normalized tangent vector at a given face vertex. More...
MStatus	getFaceVertexTangents (int faceIndex, MFloatVectorArray &tangents, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL) const
	Return all per-vertex-per-face tangents for a given face. More...
MStatus	getBinormals (MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL) const
	Return the binormal vectors for all face vertices. More...
MStatus	getFaceVertexBinormal (int faceIndex, int vertexIndex, MVector &normal, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL) const
	Return the binormal vector at a given face vertex. More...
MStatus	getFaceVertexBinormals (int faceIndex, MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL) const
	Return all per-vertex-per-face binormals for a given face. More...
bool	isRightHandedTangent (int tangentId, const MString *uvSetName=NULL, MStatus *ReturnStatus=NULL) const
	Returns true if the normal, tangent and binormal form a right handed coordinate system. More...
bool	isPolygonConvex (int faceIndex, MStatus *ReturnStatus=NULL) const
	This method determines if the specified polygon is convex. More...
MStatus	getEdgeVertices (int edgeId, int2 &vertexList) const
	This method retrieves the object-relative (mesh-relative/global) vertex indices corresponding to the specified edge. More...
bool	isEdgeSmooth (int edgeId, MStatus *ReturnStatus=NULL) const
	This method determines if the specified edge is smooth (soft). More...
MStatus	setEdgeSmoothing (int edgeId, bool smooth=true)
	This method sets the specified edge to be hard or smooth (soft). More...
MStatus	setEdgeSmoothings (const MIntArray &edgeIds, const MIntArray &smooths)
	This method sets the specified edges to be hard or smooth (soft). More...
MStatus	cleanupEdgeSmoothing ()
	This method updates the mesh after setEdgeSmoothing has been done. More...
MStatus	getCreaseEdges (MUintArray &edgeIds, MDoubleArray &creaseData) const
	This method returns the crease edges of the mesh, and also the crease data associated with those edges. More...
MStatus	setCreaseEdges (const MUintArray &edgeIds, const MDoubleArray &creaseData)
	This method sets the specified edges of the mesh as crease edges. More...
MUintArray	getInvisibleFaces (MStatus *ReturnStatus=NULL) const
	This method returns the invisible faces of the mesh. More...
MStatus	setInvisibleFaces (const MUintArray &faceIds, bool makeVisible=false)
	This method sets the specified faces of the mesh to be visible or invisible. More...
MStatus	getCreaseVertices (MUintArray &vertexIds, MDoubleArray &creaseData) const
	This method returns the crease vertices of the mesh, and also the crease data associated with those vertices. More...
MStatus	setCreaseVertices (const MUintArray &vertexIds, const MDoubleArray &creaseData)
	This method sets the specified vertices of the mesh as crease vertices. More...
int	numUVSets (MStatus *ReturnStatus=NULL) const
	Returns the number of uv sets for an object. More...
MString	createUVSetWithName (const MString &uvSetName, MDGModifier *modifier=NULL, MStatus *ReturnStatus=NULL, const MUintArray *instances=NULL)
	Create a new empty uv set for this mesh. More...
MString	copyUVSetWithName (const MString &fromName, const MString &toName, MDGModifier *modifier=NULL, MStatus *ReturnStatus=NULL)
	Copies a uv set from one to another for this mesh. More...
MStatus	renameUVSet (const MString &origName, const MString &newName, MDGModifier *modifier=NULL)
	Renames a uv set from one name to another for this mesh. More...
MStatus	deleteUVSet (const MString &setName, MDGModifier *modifier=NULL, MSelectionList *currentSelection=NULL)
	Deletes a named uv set from the object. More...
MStatus	setCurrentUVSetName (const MString &setName, MDGModifier *modifier=NULL, MSelectionList *currentSelection=NULL)
	Set the "current" uv set for this object. More...
MString	currentUVSetName (MStatus *ReturnStatus=NULL, int instance=kMFnMeshInstanceUnspecified) const
	Get the name of the "current" uv set. More...
MStatus	getUVSetNames (MStringArray &setNames) const
	Get the names of all of the uv sets on this object. More...
MStatus	getUVSetFamilyNames (MStringArray &familyNames) const
	Get the names of all of the uv set families on this object. More...
MStatus	getUVSetsInFamily (const MString &familyName, MStringArray &setNames) const
	Get the names of the uv sets that belong to this set family. More...
bool	isUVSetPerInstance (const MString &name, MStatus *ReturnStatus=NULL) const
	Return true if this set is per-instance, and false if it is shared across all instances. More...
MStatus	getFaceUVSetNames (int polygonId, MStringArray &setNames) const
	This method returns the list of UV sets mapped to a face. More...
MStatus	getAssociatedUVSetTextures (const MString uvSetName, MObjectArray &textures) const
	Get a list of texture nodes which are using a given uv set. More...
MStatus	getAssociatedUVSetInstances (const MString &uvSetName, MIntArray &instances) const
	Get a list of the instance numbers associated with this uv map. More...
MStatus	setUVs (const MFloatArray &uArray, const MFloatArray &vArray, const MString *uvSet=NULL)
	Sets all of the texture coordinates (uv's) for this mesh. More...
MStatus	setSomeUVs (const MIntArray &uvIds, const MFloatArray &uArray, const MFloatArray &vArray, const MString *uvSet=NULL)
	Sets the specified texture coordinates (UV's) for this mesh. More...
MStatus	getUVs (MFloatArray &uArray, MFloatArray &vArray, const MString *uvSet=NULL) const
	This method copies the texture coordinate list for this mesh into the given uv arrays. More...
MStatus	setUV (int uvId, float u, float v, const MString *uvSet=NULL)
	Sets the specified texture coordinate. More...
MStatus	getUV (int uvId, float &u, float &v, const MString *uvSet=NULL) const
	Get the value of the specified texture coordinate from this mesh's uv list. More...
MStatus	getPointAtUV (int polygonId, MPoint &theClosestPoint, float2 &uvPoint, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL, float tolerance=0.0)
	Return the position of the point at the given UV value in the current polygon. More...
MStatus	getPointsAtUV (MIntArray &polygonIds, MPointArray &points, const float2 &uvPoint, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL, float tolerance=0.0) const
	Return the positions of the points at the given UV value on the mesh. More...
MStatus	getUVAtPoint (MPoint &pt, float2 &uvPoint, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL, int *closestPolygon=NULL)
	Find the point closest to the given point, and return the UV value at that point. More...
MStatus	getAxisAtPoint (MPoint &pt, MVector &normal, MVector &uTangent, MVector &vTangent, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL, int *closestPolygon=NULL)
	Find the point on the mesh which is closest to the given point, and return the axis at that point. More...
MStatus	getPolygonUV (int polygonId, int vertexIndex, float &u, float &v, const MString *uvSet=NULL) const
	Get the value of the specified texture coordinate for a vertex in a polygon. More...
MStatus	getPolygonUVid (int polygonId, int vertexIndex, int &uvId, const MString *uvSet=NULL) const
	Get the id of the specified texture coordinate for a vertex in a polygon. More...
MStatus	assignUV (int polygonId, int vertexIndex, int uvId, const MString *uvSet=NULL)
	Maps a texture coordinate to a specified vertex of a polygon. More...
MStatus	assignUVs (const MIntArray &uvCounts, const MIntArray &uvIds, const MString *uvSet=NULL)
	This method maps all texture coordinates for the mesh. More...
MStatus	clearUVs (const MString *uvSet=NULL)
	This method clears out all texture coordinates for the mesh, and leaves behind an empty UVset. More...
MStatus	getAssignedUVs (MIntArray &uvCounts, MIntArray &uvIds, const MString *uvSet=NULL) const
	Get assigned UVs. More...
MStatus	getUvShellsIds (MIntArray &uvShellIds, unsigned int &nbUvShells, const MString *uvSet=NULL) const
	Constructs an array of unique integer for each UV shell. More...
MStatus	getPinUVs (MUintArray &pinIds, MDoubleArray &pinData, const MString *uvSet=NULL) const
	This method returns the pin uvs of the mesh, and also the pin data associated with those uvs. More...
MStatus	setPinUVs (const MUintArray &pinIds, const MDoubleArray &pinData, const MString *uvSet=NULL)
	This method sets the specified uvs of the mesh as "pinned" uvs, a "pinned" uv is one which should not be modified. More...
bool	isPolygonUVReversed (int polygonId, const MString *uvSet=NULL, MStatus *ReturnStatus=NULL) const
	This method determines if the winding order of texture coordinates (uv's) for specified polygon are reversed (clockwise) More...
int	numColorSets (MStatus *ReturnStatus=NULL) const
	Returns the number of color sets for an object. More...
MString	createColorSetWithName (const MString &colorSetName, MDGModifier *modifier=NULL, const MUintArray *instances=NULL, MStatus *ReturnStatus=NULL)
	Create a new empty color set for this mesh. More...
MStatus	deleteColorSet (const MString &colorSetName, MDGModifier *modifier=NULL, MSelectionList *currentSelection=NULL)
	Deletes a named color set from the object. More...
MStatus	setCurrentColorSetName (const MString &setName, MDGModifier *modifier=NULL, MSelectionList *currentSelection=NULL)
	Set the "current" or "working" color set for this object. More...
MString	currentColorSetName (int instance=kMFnMeshInstanceUnspecified, MStatus *ReturnStatus=NULL) const
	Get the name of the "current" or "working" color set. More...
MStatus	getColorSetNames (MStringArray &setNames) const
	Get the names of all of the colors sets on this object. More...
MStatus	getColorSetFamilyNames (MStringArray &familyNames) const
	Get the names of all of the color set families on this object. More...
MStatus	getColorSetsInFamily (const MString &familyName, MStringArray &setNames) const
	Get the names of the color sets that belong to this set family. More...
bool	isColorSetPerInstance (const MString &name, MStatus *ReturnStatus=NULL) const
	Return true if this color set is per-instance, and false if it is shared across all instances. More...
MStatus	getAssociatedColorSetInstances (const MString &setName, MIntArray &instances) const
	Get a list of the instance numbers associated with this color map. More...
MStatus	setFaceColor (MColor &color, int index)
	Set vertex-face Color for all vertices on this face. More...
MStatus	setFaceColor (MColor &color, int index, MColorRepresentation rep)
	Set vertex-face Color of specified channels for all vertices on this face. More...
MStatus	setVertexColor (MColor &color, int index, MDGModifier *modifier=NULL)
	Set color for this vertex. More...
MStatus	setVertexColor (MColor &color, int index, MDGModifier *modifier, MColorRepresentation rep)
	Set color of specified channels for this vertex. More...
MStatus	setFaceVertexColor (MColor &color, int faceIndex, int vertexIndex, MDGModifier *modifier=NULL)
	Set color for this vertex in this face. More...
MStatus	setFaceVertexColor (MColor &color, int faceIndex, int vertexIndex, MDGModifier *modifier, MColorRepresentation rep)
	Set color of specified channels for this vertex in this face. More...
MStatus	setFaceVertexColor (int faceIndex, int localVertexIndex, MColor &color, MDGModifier *modifier=NULL)
	Set color for this vertex in this face. More...
MStatus	setFaceVertexColor (int faceIndex, int localVertexIndex, MColor &color, MDGModifier *modifier, MColorRepresentation rep)
	Set color of specified channels for this vertex in this face. More...
MStatus	setFaceColors (MColorArray &colors, MIntArray &faceList)
	Set color for these faces. More...
MStatus	setFaceColors (MColorArray &colors, MIntArray &faceList, MColorRepresentation rep)
	Set color of specified channels for these faces. More...
MStatus	setVertexColors (MColorArray &colors, MIntArray &vertexList, MDGModifier *modifier=NULL)
	Set color for these vertices. More...
MStatus	setVertexColors (MColorArray &colors, MIntArray &vertexList, MDGModifier *modifier, MColorRepresentation rep)
	Set color of specified channels for these vertices. More...
MStatus	setFaceVertexColors (MColorArray &colors, MIntArray &faceList, MIntArray &vertexList, MDGModifier *modifier=NULL)
	Set colors for these face/vertex pairs. More...
MStatus	setFaceVertexColors (MColorArray &colors, MIntArray &faceList, MIntArray &vertexList, MDGModifier *modifier, MColorRepresentation rep)
	Set colors of specified channels for these face/vertex pairs. More...
MStatus	removeFaceColors (MIntArray &faceList)
	Remove previously set color these faces. More...
MStatus	removeVertexColors (MIntArray &vertexList)
	Remove color from these vertices. More...
MStatus	removeFaceVertexColors (MIntArray &faceList, MIntArray &vertexList)
	Remove colors for these face/vertex pairs. More...
MStatus	getVertexColors (MColorArray &colors, const MString *colorSet=NULL, const MColor *defaultUnsetColor=NULL)
	Get colors for all Vertices of the given colorSet. More...
MStatus	getFaceVertexColors (MColorArray &colors, const MString *colorSet=NULL, const MColor *defaultUnsetColor=NULL)
	Get colors for all vertex/faces of the given color set. More...
MStatus	getFaceVertexColorIndex (int faceIndex, int localVertexIndex, int &colorIndex, const MString *colorSet=NULL)
	Get an index into the array returned by getFaceVertexColors. More...
MStatus	setColors (const MColorArray &colors, const MString *colorSet=NULL)
	Sets all of the colors for this mesh. More...
MStatus	setColors (const MColorArray &colors, const MString *colorSet, MColorRepresentation rep)
	Sets all of the colors of specified channels for this mesh. More...
MStatus	setSomeColors (const MIntArray &colorIds, const MColorArray &colors, const MString *colorSet=NULL)
	Sets the specified colors for this mesh. More...
MStatus	setSomeColors (const MIntArray &colorIds, const MColorArray &colors, const MString *colorSet, MColorRepresentation rep)
	Sets the specified colors of specified channels for this mesh. More...
MStatus	getColors (MColorArray &colors, const MString *colorSet=NULL, const MColor *defaultUnsetColor=NULL) const
	This method copies the color array for this mesh into the given color array. More...
MStatus	getColorIndex (int faceIndex, int localVertexIndex, int &colorIndex, const MString *colorSet=NULL)
	Get an index into the array returned by getColors. More...
MStatus	setColor (int colorId, const MColor &color, const MString *colorSet=NULL)
	Sets the specified color values. More...
MStatus	setColor (int colorId, const MColor &color, const MString *colorSet, MColorRepresentation rep)
	Sets the specified color values of specified channels. More...
MStatus	getColor (int colorId, MColor &color, const MString *colorSet=NULL, const MColor *defaultUnsetColor=NULL) const
	Get the value of the specified texture coordinate from this mesh's color list. More...
MStatus	assignColor (int polygonId, int vertexIndex, int colorId, const MString *colorSet=NULL)
	Maps a color value to a specified vertex of a polygon. More...
MStatus	assignColors (const MIntArray &colorIds, const MString *colorSet=NULL)
	This method maps all colors for the mesh. More...
MStatus	clearColors (const MString *colorSet=NULL)
	This method clears out all color for the mesh, and leaves behind an empty color set. More...
bool	displayColors (MStatus *ReturnStatus=NULL) const
	Determine if the mesh node is set to display vertex colors. More...
MStatus	setDisplayColors (bool enable)
	Set whether the mesh node should display vertex colors. More...
int	getHoles (MIntArray &holeInfoArray, MIntArray &holeVertexArray, MStatus *ReturnStatus=NULL)
	Retrieves a list of the holes in the polygon. More...
bool	onBoundary (int polygonId, MStatus *ReturnStatus=NULL) const
	A method to determines whether the specified face in the mesh is a boundary face. More...
bool	isBlindDataTypeUsed (int blindDataId, MStatus *ReturnStatus=NULL) const
	Is this BlindData type id is already in use in this scene? More...
MStatus	createBlindDataType (int blindDataId, MStringArray longNames, MStringArray shortNames, MStringArray formatNames)
	Create a new blind data type. More...
bool	hasBlindDataComponentId (int compID, MFn::Type compType, int blindDataId, MStatus *ReturnStatus=NULL) const
	Does this component have blind data with the given ID. More...
bool	hasBlindData (MFn::Type compType, int blindDataId, MStatus *ReturnStatus=NULL) const
	Returns true if any component of the given type on this mesh have blind data with the given ID. More...
bool	hasBlindDataComponentId (int compID, MFn::Type compType, MStatus *ReturnStatus=NULL) const
	Does this component have any kind of blind data. More...
bool	hasBlindData (MFn::Type compType, MStatus *ReturnStatus=NULL) const
	Does any component of this type have any blind data. More...
MStatus	getBlindDataTypes (MFn::Type compType, MIntArray &blindDataIds) const
	Get the list of blind data ID's associated with the given component type on this mesh. More...
MStatus	getBlindDataAttrNames (int blindDataId, MStringArray &longNames, MStringArray &shortNames, MStringArray &formatNames) const
	Get the blind data attribute names and types for the specified blind data type id. More...
MStatus	getFaceVertexBlindDataIndex (int faceIndex, int vertexIndex, int &blindDataIndex) const
	Get the single index to retrieve face-vertex blind data. More...
MStatus	getBlindDataFaceVertexIndices (int blindDataIndex, int &faceIndex, int &vertexIndex) const
	Get the face and vertex indices from the face-vertex blind data index. More...
MStatus	getIntBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, int &data) const
	Get the blind data value for the specified blind data attribute of the specified component. More...
MStatus	getIntBlindData (MFn::Type compType, int blindDataId, MString attrName, MIntArray &compIDs, MIntArray &data) const
	Get the blind data value for the specified blind data attribute of the given type of component. More...
MStatus	getFloatBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, float &data) const
	Get the blind data value for the specified blind data attribute of the specified component. More...
MStatus	getFloatBlindData (MFn::Type compType, int blindDataId, MString attrName, MIntArray &compIDs, MFloatArray &data) const
	Get the blind data value for the specified blind data attribute for all components of the given type. More...
MStatus	getDoubleBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, double &data) const
	Get the blind data value for the specified blind data attribute of the specified component. More...
MStatus	getDoubleBlindData (MFn::Type compType, int blindDataId, MString attrName, MIntArray &compIDs, MDoubleArray &data) const
	Get the blind data value for the specified blind data attribute for all components of the given type. More...
MStatus	getBoolBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, bool &data) const
	Get the blind data value for the specified blind data attribute of the specified component. More...
MStatus	getBoolBlindData (MFn::Type compType, int blindDataId, MString attrName, MIntArray &compIDs, MIntArray &data) const
	Get the blind data value for the specified blind data attribute for all components of the given type. More...
MString	stringBlindDataComponentId (int compID, MFn::Type compType, int blindDataId, MString attrName, MStatus *ReturnStatus=NULL) const
	Get the blind data value for the specified blind data attribute of the specified component. More...
MStatus	getStringBlindData (MFn::Type compType, int blindDataId, MString attrName, MIntArray &compIDs, MStringArray &data) const
	Get the blind data value for the specified blind data attribute for all components of the given type. More...
MString	binaryBlindDataComponentId (int compID, MFn::Type compType, int blindDataId, MString attrName, MStatus *ReturnStatus=NULL) const
	Get the blind data value for the specified blind data attribute of the specified component. More...
MStatus	getBinaryBlindData (MFn::Type compType, int blindDataId, MString attrName, MIntArray &compIDs, MStringArray &data) const
	Get the blind data value for the specified blind data attribute for all components of the given type. More...
MStatus	setIntBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, int data)
	Set a value for an integer blind data attribute. More...
MStatus	setIntBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, int data)
	Set a value for an integer blind data on an array of components. More...
MStatus	setIntBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MIntArray &data)
	Set a values for an integer blind data on an array of components. More...
MStatus	setFloatBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, float data)
	Set a value for a float blind data attribute. More...
MStatus	setFloatBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, float data)
	Set a value for float blind data on an array of components. More...
MStatus	setFloatBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MFloatArray &data)
	Set a values for a float blind data on an array of components. More...
MStatus	setDoubleBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, double data)
	Set a value for a double blind data attribute. More...
MStatus	setDoubleBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, double data)
	Set a value for double blind data on an array of components. More...
MStatus	setDoubleBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MDoubleArray &data)
	Set a values for a double blind data on an array of components. More...
MStatus	setBoolBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, bool data)
	Set a value for a boolean blind data attribute. More...
MStatus	setBoolBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, bool data)
	Set a value for boolean blind data on an array of components. More...
MStatus	setBoolBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MIntArray &data)
	Set a values for a boolean blind data on an array of components. More...
MStatus	setStringBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, MString data)
	Set a value for a string blind data attribute. More...
MStatus	setStringBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MString data)
	Set a value for string blind data on an array of components. More...
MStatus	setStringBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MStringArray &data)
	Set a values for a string blind data on an array of components. More...
MStatus	setBinaryBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, MString data)
	Set a value for a binary blind data attribute. More...
MStatus	setBinaryBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MString data)
	Set a value for binary blind data on an array of components. More...
MStatus	setBinaryBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MStringArray &data)
	Set a values for a binary blind data on an array of components. More...
MStatus	setBinaryBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, char *data, int length)
	Set a value for a binary blind data attribute. More...
MStatus	clearBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName)
	Delete a value for a binary blind data attribute on a particular componenr. More...
MStatus	clearBlindData (MFn::Type compType, int blindDataId, MString attrName)
	Delete the values for the given attribute on the given binary blind data type from all components of the given type. More...
MStatus	clearBlindData (MFn::Type compType)
	Delete all blind data from components of the given type, e.g. More...
MStatus	clearBlindData (int compID, MFn::Type compType, int blindDataId)
	Delete the values for a binary blind data type (all its attributes) from a particular component. More...
MStatus	clearBlindData (MFn::Type compType, int blindDataId)
	Delete the values for a binary blind data type (all its attributes) from all components of the given type. More...
void	setCheckSamePointTwice (bool check=true)
	This method allows the turning on or off of duplicate point checking when polygons are created or added using this class. More...
bool	getCheckSamePointTwice (void)
	Return true if checking for duplicate points is turned on. More...
MStatus	createInPlace (int numVertices, int numPolygons, const MFloatPointArray &vertexArray, const MIntArray &polygonCounts, const MIntArray &polygonConnects)
	Replaces the existing polygonal mesh with a new one specified by array of vertices and polygon connection information. More...
MStatus	copyInPlace (const MObject &source)
	This method creates copies the given source mesh onto the current surface. More...
MString	createColorSetWithName (const MString &colorSetName, MDGModifier *modifier, MStatus *ReturnStatus)
	This method is obsolete. More...
MObject	generateSmoothMesh (MObject parentOrOwner, MStatus *ReturnStatus)
	This method is obsolete. More...
	MFnMesh (const MObject &object, MStatus *ret=NULL)
	Constructor. More...
MString	currentColorSetName (MStatus *ReturnStatus) const
	This method is obsolete. This method is not available in Python. More...
MObject	addPolygon (MPointArray &vertexArray, double polyTolerance, bool mergeVertices=true, double pointTolerance=kMFnMeshPointTolerance, bool forceGeometry=true, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	This method is obsolete. This method is not available in Python. More...
bool	intersect (MPoint &raySource, MVector &rayDirection, MPointArray &points, MStatus *ReturnStatus=NULL) const
	This method is obsolete. This method is not available in Python. More...
bool	intersect (const MPoint &raySource, const MVector &rayDirection, MPointArray &points, MStatus *ReturnStatus=NULL) const
	This method is obsolete. This method is not available in Python. More...
MStatus	getBlindDataAttrNames (int blindDataId, MStringArray &longNames, MStringArray &shortNames) const
	Get the blind data attribute names for the specified blind data type id. More...
bool	hasBlindData (int compID, MFn::Type compType, int blindDataId, MStatus *ReturnStatus=NULL) const
	This method is obsolete. This method is not available in Python. More...
bool	hasBlindData (int compID, MFn::Type compType, MStatus *ReturnStatus=NULL) const
	This method is obsolete. This method is not available in Python. More...
MStatus	createUVSet (MString &uvSetName, MDGModifier *modifier=NULL, const MUintArray *instances=NULL)
	This method is not available in Python. More...
MStatus	copyUVSet (const MString &fromName, MString &toName, MDGModifier *modifier=NULL)
	This method is not available in Python. More...
MStatus	getCurrentUVSetName (MString &setName, int instance=kMFnMeshInstanceUnspecified) const
	This method is not available in Python. More...
MStatus	createColorSet (MString &colorSetName, MDGModifier *modifier=NULL, const MUintArray *instances=NULL)
	This method is not available in Python. More...
MStatus	createColorSet (MString &colorSetName, MDGModifier *modifier, bool clamped, MColorRepresentation rep, const MUintArray *instances=NULL)
	This method is not available in Python. More...
MStatus	getCurrentColorSetName (MString &setName, int instance=kMFnMeshInstanceUnspecified) const
	This method is not available in Python. More...
MStatus	getStringBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, MString &data) const
	This method is obsolete. This method is not available in Python. More...
MStatus	getBinaryBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, MString &data) const
	This method is obsolete. This method is not available in Python. More...
virtual const adsk::Data::Associations *	metadata (MStatus *ReturnStatus=NULL) const
	This method is not available in Python. More...
virtual MStatus	setMetadata (const adsk::Data::Associations &)
	This method is not available in Python. More...
virtual MStatus	validateMetadata (MString &errors) const
	This method is not available in Python. More...
Public Member Functions inherited from MFnDagNode
virtual	~MFnDagNode ()
	Destructor. More...
	MFnDagNode ()
	Class Constructor. More...
	MFnDagNode (MObject &object, MStatus *ret=NULL)
	This method is not available in Python. More...
	MFnDagNode (const MDagPath &object, MStatus *ret=NULL)
	Class Constructor. More...
MObject	create (const MTypeId &typeId, MObject &parent=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	Creates a new DAG node with the given type tag. More...
MObject	create (const MTypeId &typeId, const MString &name, MObject &parent=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	Creates a new DAG node with the given type tag. More...
MObject	create (const MString &type, MObject &parent=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	Creates a new DAG node with the given type tag. More...
MObject	create (const MString &type, const MString &name, MObject &parent=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	Creates a new DAG node with the given type tag. More...
unsigned int	parentCount (MStatus *ReturnStatus=NULL) const
	Determines the number of parent Nodes of the Node. More...
MObject	parent (unsigned int i, MStatus *ReturnStatus=NULL) const
	Queries the DAG Node attached to the Function Set for the parent Node corresponding to the given index. More...
MStatus	addChild (MObject &child, unsigned int index=kNextPos, bool keepExistingParents=false)
	Makes the given DAG Node a child of the DAG Node to which this instance of the Function Set is attached. More...
MStatus	removeChild (MObject &child)
	Removes the given DAG Node from the parent. More...
MStatus	removeChildAt (unsigned int index)
	Removes the child at the given index from the parent. More...
unsigned int	childCount (MStatus *ReturnStatus=NULL) const
	Determines the number of child Nodes of the Node. More...
MObject	child (unsigned int i, MStatus *ReturnStatus=NULL) const
	Queries the DAG Node attached to the Function Set for the child Node corresponding to the given index. More...
MObject	dagRoot (MStatus *ReturnStatus=NULL)
	Determines the root of the first DAG Path to the DAG Node attached to the Function Set. More...
bool	hasParent (const MObject &node, MStatus *ReturnStatus=NULL) const
	Determines whether or not the given Node is a parent of the DAG Node attached to the Function Set. More...
bool	hasChild (const MObject &node, MStatus *ReturnStatus=NULL) const
	Determines whether or not the given Node is a child of the DAG Node attached to the Function Set. More...
bool	isChildOf (const MObject &node, MStatus *ReturnStatus=NULL) const
	Determines whether or not the DAG Node attached to the Function Set is a child of the given node. More...
bool	isParentOf (const MObject &node, MStatus *ReturnStatus=NULL) const
	Determines whether or not the DAG Node attached to the Function Set is a parent of the given node. More...
bool	inUnderWorld (MStatus *ReturnStatus=NULL) const
	Determines whether or not the DAG Node is an underworld node. More...
bool	inModel (MStatus *ReturnStatus=NULL) const
	Determines whether or not the DAG Node is in the model. More...
bool	isInstanceable (MStatus *ReturnStatus=NULL) const
	Returns true if the DAG node can be instanced, and false otherwise. More...
MStatus	setInstanceable (const bool how)
	Sets whether or not the DAG node is instanceable. More...
bool	isInstanced (bool indirect=true, MStatus *ReturnStatus=NULL) const
	Determines whether the DAG Node attached to the Function Set is directly or indirectly instanced. More...
bool	isInstancedAttribute (const MObject &attr, MStatus *ReturnStatus=NULL) const
	Returns true if the specified attribute is instanced. More...
unsigned int	instanceCount (bool total, MStatus *ReturnStatus=NULL) const
	Determines the number of times the Node attached to the Function Set is instanced. More...
MObject	duplicate (bool instance=false, bool instanceLeaf=false, MStatus *ReturnStatus=NULL) const
	This method duplicates the DAG hierarchy rooted at the current node. More...
MStatus	getPath (MDagPath &path) const
	Returns a DAG Path to the DAG Node attached to the Function Set. More...
MStatus	getAllPaths (MDagPathArray &paths) const
	Determines all DAG Paths to the DAG Node attached to the Function Set. More...
MString	fullPathName (MStatus *ReturnStatus=NULL) const
	Return a string representing the full path from the root of the dag to this object. More...
MString	partialPathName (MStatus *ReturnStatus=NULL) const
	Return a string representing the partial path from the root of the dag to this object. More...
MMatrix	transformationMatrix (MStatus *ReturnStatus=NULL) const
	Returns the object space transformation matrix for this DAG node. More...
bool	isIntermediateObject (MStatus *ReturnStatus=NULL) const
	Returns true if this object is an intermediate in a geometry calculation. More...
MStatus	setIntermediateObject (bool isIntermediate)
	Sets whether this object is an intermediate in a geometry calculation. More...
int	objectColor (MStatus *ReturnStatus=NULL) const
	This method is obsolete. More...
MStatus	setObjectColor (int color)
	Sets the index for the current user defined inactive color used by the node. More...
bool	usingObjectColor (MStatus *ReturnStatus=NULL) const
MStatus	setUseObjectColor (bool useObjectColor)
MObjectColorType	objectColorType (MStatus *ReturnStatus=NULL) const
	Determines whether or not the user defined inactive color will be used for the node, or whether the default inactive color will be used. More...
MStatus	setObjectColorType (MObjectColorType type)
	Sets whether or not the user defined inactive object color will be used. More...
MStatus	setObjectColor (const MColor &color)
	Sets the color value for the current user defined inactive color used by the node. More...
MColor	objectColorRGB (MStatus *ReturnStatus=NULL) const
	Determines the RGB color for the current user defined inactive color used by the node. More...
int	objectColorIndex (MStatus *ReturnStatus=NULL) const
	Determines the index for the current user defined inactive color used by the node. More...
MColor	hiliteColor (MStatus *ReturnStatus=NULL) const
	Determines the current hilite color used by the node. More...
bool	usingHiliteColor (MStatus *ReturnStatus=NULL) const
	Determines whether or not the hilite color will be used for the node. More...
MColor	dormantColor (MStatus *ReturnStatus=NULL) const
	Determines the dormant color used by this node. More...
MColor	activeColor (MStatus *ReturnStatus=NULL) const
	Determines the active color used by this node. More...
bool	drawOverrideEnabled (MStatus *ReturnStatus=NULL) const
	Determines whether or not draw override is turned on for this node. More...
bool	drawOverrideIsReference (MStatus *ReturnStatus=NULL) const
	Determines whether or not Display Type of the draw override is Reference for this node. More...
bool	drawOverrideIsTemplate (MStatus *ReturnStatus=NULL) const
	Determines whether or not Display Type of the draw override is Template for this node. More...
bool	drawOverrideColor (MColor &color, MStatus *ReturnStatus=NULL) const
	Determines the draw override color used by this node. More...
MStatus	getConnectedSetsAndMembers (unsigned int instanceNumber, MObjectArray &sets, MObjectArray &comps, bool renderableSetsOnly) const
	Returns all the sets connected to the specified instance of this DAG object. More...
MBoundingBox	boundingBox (MStatus *ReturnStatus=NULL) const
	Returns the bounding box for the dag node in object space. More...
MDagPath	dagPath (MStatus *ReturnStatus=NULL) const
	Returns the DagPath to which the Function Set is attached. More...
virtual MStatus	setObject (const MDagPath &path)
	Attaches Function Set to the DAG Node that has the given DAG Path. More...
virtual MStatus	setObject (MObject &object)
	Attaches Function Set to given DAG Node. More...
MObject	model (MStatus *ReturnStatus=NULL) const
	This method is obsolete. More...
	MFnDagNode (const MObject &object, MStatus *ret=NULL)
	No script support. More...
virtual MStatus	setObject (const MObject &object)
	No script support. More...
Public Member Functions inherited from MFnDependencyNode
virtual	~MFnDependencyNode ()
	Destructor.
	MFnDependencyNode ()
	Default constructor.
	MFnDependencyNode (MObject &object, MStatus *ReturnStatus=NULL)
	Constructor. More...
MObject	create (const MTypeId &typeId, MStatus *ReturnStatus=NULL)
	Creates a new dependency node with the given type tag. More...
MObject	create (const MTypeId &typeId, const MString &name, MStatus *ReturnStatus=NULL)
	Creates a new dependency node with the given type tag. More...
MObject	create (const MString &type, MStatus *ReturnStatus=NULL)
	Creates a new dependency node with the given type. More...
MObject	create (const MString &type, const MString &name, MStatus *ReturnStatus=NULL)
	Creates a new dependency node with the given type. More...
MTypeId	typeId (MStatus *ReturnStatus=NULL) const
	Returns the type id of this node. More...
MString	typeName (MStatus *ReturnStatus=NULL) const
	Returns the type name of this node. More...
MString	name (MStatus *ReturnStatus=NULL) const
	Returns the name of this node. More...
MString	absoluteName (MStatus *ReturnStatus=NULL) const
	Returns the absolute name of this node. More...
MString	pluginName (MStatus *ReturnStatus=NULL) const
	Returns the name of the plug-in this MFnDependendencyNode was defined in. More...
MString	setName (const MString &name, bool createNamespace=false, MStatus *ReturnStatus=NULL)
	Sets the name of this node. More...
MUuid	uuid (MStatus *ReturnStatus=NULL) const
	Returns the node's UUID. More...
void	setUuid (const MUuid &uuid, MStatus *ReturnStatus=NULL)
	Sets the node's UUID. More...
MStatus	getConnections (MPlugArray &array) const
	Get all of the current connections to this node as an array of plugs. More...
unsigned int	attributeCount (MStatus *ReturnStatus=NULL) const
	Returns the number of attributes that this node has. More...
MObject	attribute (unsigned int index, MStatus *ReturnStatus=NULL) const
	Finds the attribute of this node at the given index. More...
MObject	reorderedAttribute (unsigned int index, MStatus *ReturnStatus=NULL) const
	Some nodes, such as the various animCurve nodes, require that their attributes be set in a specific order for proper operation. More...
MObject	attribute (const MString &attrName, MStatus *ReturnStatus=NULL) const
	Finds the attribute of this node that has the given name. More...
MAttrClass	attributeClass (const MObject &attr, MStatus *ReturnStatus=NULL) const
	Returns the class (normal, dynamic, extension) of the specified attribute. More...
MStatus	getAffectedAttributes (const MObject &attr, MObjectArray &affectedAttributes) const
	Returns an array of attributes that are affected by the attribute passed in. More...
MStatus	getAffectedByAttributes (const MObject &attr, MObjectArray &affectedByAttributes) const
	Returns an array of attributes that affect the attribute passed in, attr. More...
MPlug	findPlug (const MObject &attr, bool wantNetworkedPlug, MStatus *ReturnStatus=NULL) const
	Attempt to find a plug for the given attribute. More...
MPlug	findPlug (const MString &attrName, bool wantNetworkedPlug, MStatus *ReturnStatus=NULL) const
	Attempt to find a plug for the given attribute. More...
MPlug	findPlug (const MObject &attr, MStatus *ReturnStatus=NULL) const
	This method is obsolete. More...
MPlug	findPlug (const MString &attrName, MStatus *ReturnStatus=NULL) const
	This method is obsolete. More...
MStatus	addAttribute (const MObject &attr)
	Add a new dynamic attibute to this node. More...
MStatus	removeAttribute (const MObject &attr)
	Remove a dynamic attribute from a node. More...
MPxNode *	userNode (MStatus *ReturnStatus=NULL) const
	If the function set's node is a plug-in node, then this method will extract the MPxNode pointer from it. More...
bool	isFromReferencedFile (MStatus *ReturnStatus=NULL) const
	Indicates whether or not this node came from a referenced file. More...
bool	isShared (MStatus *ReturnStatus=NULL) const
	Indicates whether or not this node is shared. More...
bool	isTrackingEdits (MStatus *ReturnStatus=NULL) const
	Returns whether or not edits on the given node are being tracked by the generalized edit system. More...
bool	hasUniqueName (MStatus *ReturnStatus=NULL) const
	Indicates whether or not this node's name is unique within the scene. More...
MString	parentNamespace (MStatus *ReturnStatus=NULL) const
	Returns the name of the namespace in which this node resides. More...
bool	isLocked (MStatus *ReturnStatus=NULL) const
	Indicates whether or not this node is locked. More...
MStatus	setLocked (bool locked)
	Locks or unlocks this node. More...
bool	isNewAttribute (const MObject &attr, MStatus *ReturnStatus=NULL) const
	Indicates whether or not the specified attribute was added to this node within the current scene. More...
MStatus	setFlag (unsigned int flag, bool state)
	Sets the state of the specified flag for the node. More...
bool	isFlagSet (unsigned int flag, MStatus *ReturnStatus=NULL) const
	Retrieves the current state of the specified flag for a node. More...
bool	isDefaultNode (MStatus *ReturnStatus=NULL) const
	Returns true if the node is a default node. More...
MStatus	setDoNotWrite (bool flag)
	Use this method to mark the "do not write" state of this node. More...
bool	canBeWritten (MStatus *ReturnStatus=NULL) const
	Returns the do not write state of the node. More...
bool	hasAttribute (const MString &name, MStatus *ReturnStatus=NULL) const
	Returns true if the node already has an attribute with the given name. More...
MObject	getAliasAttr (bool force, MStatus *ReturnStatus=NULL)
	Returns the node's alias attribute, which is a special attribute used to store information about the node's attribute aliases. More...
bool	setAlias (const MString &alias, const MString &name, const MPlug &plug, bool add=true, MStatus *ReturnStatus=NULL)
	Sets or removes an alias (i.e. More...
bool	findAlias (const MString &alias, MObject &attrObj, MStatus *ReturnStatus=NULL) const
	Retrieves the attribute with the given alias. More...
bool	getAliasList (MStringArray &strArray, MStatus *ReturnStatus=NULL)
	Returns a list of all attribute aliases for this node. More...
MString	plugsAlias (const MPlug &plug, MStatus *ReturnStatus=NULL)
	Returns the alias for the plug's attribute or the empty string if that attribute has no alias. More...
MStatus	setIcon (const MString &filename)
	Associates a custom icon with the node for display in the Maya UI. More...
MString	icon (MStatus *ReturnStatus=NULL) const
	Returns the custom icon filename associated with the node. More...
MStatus	getExternalContent (MExternalContentInfoTable &table) const
	Returns the external content (files) that this node depends on. More...
MStatus	addExternalContentForFileAttr (MExternalContentInfoTable &table, const MObject &attr) const
	Adds content info to the specified table from a file path attribute. More...
MStatus	setExternalContentForFileAttr (const MObject &attr, const MExternalContentLocationTable &table)
	Sets content info in the specified attribute from the table. More...
MStatus	setExternalContent (const MExternalContentLocationTable &table)
	Changes the location of external content. More...
MString	setName (const MString &name, MStatus *ReturnStatus)
	OBSOLETE FUNCTION, NO SCRIPT SUPPORT. More...
	MFnDependencyNode (const MObject &object, MStatus *ReturnStatus=NULL)
	NO SCRIPT SUPPORT. More...
bool	getPlugsAlias (const MPlug &plug, MString &aliasName, MStatus *ReturnStatus=NULL)
	NO SCRIPT SUPPORT. More...
virtual MStatus	deleteMetadata ()
	This method is not available in Python. More...
MStatus	dgTimerOn ()
	Indicates that this node should collect DG timing data whenever DG timing is enabled. More...
MStatus	dgTimerOff ()
	Indicates that this node should no longer collect DG timing data when DG timing is enabled. More...
MdgTimerState	dgTimerQueryState (MStatus *ReturnStatus=NULL)
	The function returns the current on/off state of the node's timer. More...
MStatus	dgTimerReset ()
	The function resets the dependency graph timers and counters for this node to zero. More...
double	dgTimer (const MdgTimerMetric timerMetric, const MdgTimerType timerType, MStatus *ReturnStatus=NULL) const
	The function returns the specified timer value for the current node. More...
MStatus	dgCallbacks (const MdgTimerType type, MStringArray &callbackName, MDoubleArray &value)
	Node callbacks that occur when timing is enabled get logged with the node and can be queried via this method. More...
MStatus	dgCallbackIds (const MdgTimerType type, const MString &callbackName, MCallbackIdArray &callbackId, MDoubleArray &value)
	This method provides a further breakdown of the per-callback time returned via dgCallbacks() by returning the data on a per-callbackId basis. More...
MStatus	addAttribute (const MObject &attr, MAttrClass type)
	This method is obsolete. More...
MStatus	removeAttribute (const MObject &attr, MAttrClass type)
	This method is obsolete. More...
Public Member Functions inherited from MFnBase
virtual	~MFnBase ()
	Class Destructor. More...
bool	hasObj (MFn::Type) const
	Determines whether or not the Function Set is compatible with the specified Maya Object within the API RTTI system. More...
bool	hasObj (const MObject &) const
	Determines whether or not the Function Set is compatible with the specified Maya Object within the API RTTI system. More...
MObject	object (MStatus *ReturnStatus=NULL) const
	Returns the MObject that is attached to the Function Set. More...

Static Public Member Functions
static MMeshIsectAccelParams	uniformGridParams (int xDiv, int yDiv, int zDiv)
	Creates a MMeshIsectAccelParams configuration object that can be passed to several of the geometric query methods available on MFnMesh. More...
static MMeshIsectAccelParams	autoUniformGridParams ()
	Creates a MMeshIsectAccelParams configuration object that can be passed to several of the geometric query methods on MFnMesh to speed up their operation. More...
static MString	globalIntersectionAcceleratorsInfo ()
	Retrieves a string that describes the systemwide resource usage for cached mesh intersection accelerators. More...
static void	clearGlobalIntersectionAcceleratorInfo ()
	As described above, clears the "total count", "total build time", and "peak memory" fields from the information string returned by globalIntersectionAcceleratorsInfo(). More...
static MString	componentTypeName (MFn::Type compType, MStatus &status)
	Get a string representing a particular component type. More...
static MFn::Type	componentTypeFromName (const MString &assocName)
	Get a component type from its string name. More...
static MStatus	polyTriangulate (const float *pointsAndHoles, unsigned int pointsCount, unsigned int outerPointsCount, unsigned int holesCount, bool considerNormal, const float *normals, unsigned short *triangles, int &trianglesCount)
	Triangulates a polygon. More...
static MStatus	polyTriangulate (const MFloatPointArray &points, const MIntArray &holes, unsigned int outerPointsCount, const MFloatVectorArray &normals, MIntArray &triangles)
	Triangulates a polygon. More...
Static Public Member Functions inherited from MFnDependencyNode
static MString	classification (const MString &nodeTypeName)
	Retrieves the classification string for a node type. More...
static unsigned int	allocateFlag (const MString pluginName, MStatus *ReturnStatus=NULL)
	Allocates a node flag for sole use by the caller. More...
static MStatus	deallocateFlag (const MString pluginName, unsigned int flag)
	Deallocates a node flag which was previously allocated by a call to allocateFlag. More...
static MStatus	deallocateAllFlags (const MString pluginName)
	Deallocates all of the node flags which are currently allocated to the specified plugin. More...
static void	enableDGTiming (bool enable)
	Globally enables or disables the DG node timing mechanism. More...
Static Public Member Functions inherited from MFnBase
static const char *	className ()
	Returns the name of this class. More...

Protected Member Functions
virtual const char *	className () const
	Class name. More...

Member Enumeration Documentation

enum MColorRepresentation

Specifies which color components are used by a colorSet.

Enumerator
kAlpha	Alpha only.
kRGB	Red, green and blue only.
kRGBA	Red, green, blue and alpha.

enum SplitPlacement

Specifies how a point along split is to be determined.

Enumerator
kOnEdge	Split at a position along an edge.
kInternalPoint	Split at a point within a face.
kInvalid

enum BoolOperation

Boolean operators.

Enumerator
kUnion	Boolean union.
kDifference	Boolean difference.
kIntersection	Boolean intersection.

Constructor & Destructor Documentation

~MFnMesh ( )

virtual

Destructor.

Class destructor.

MFnMesh	(	MObject &	object,
		MStatus *	ReturnStatus = NULL
	)

Constructor.

Class constructor that initializes the function set to the given MObject.

Parameters

[in]	object	The MObject to attach the function set to
[out]	ReturnStatus	the return status

Status Codes:

• MS::kSuccess if the function set is successfully attached
• MS::kInvalidParameter if the MObject does not represent a valid Maya object or if the function set is not allowed to attach to this MObject

MFnMesh	(	const MDagPath &	object,
		MStatus *	ReturnStatus = NULL
	)

Constructor.

Class constructor that initializes the function set to the given constant MDagPath object.

Parameters

[in]	object	The const MDagPath to attach the function set to
[out]	ReturnStatus	The return status

Status Codes:

• MS::kSuccess if the function set is successfully attached
• MS::kInvalidParameter if the MObject does not represent a valid Maya object or if the function set is not allowed to attach to this MObject

MFnMesh	(	const MObject &	object,
		MStatus *	ReturnStatus = NULL
	)

Constructor.

Class constructor that initializes the function set to the given MObject.

Parameters

[in]	object	The MObject to attach the function set to
[out]	ReturnStatus	the return status

Status Codes:

• MS::kSuccess if the function set is successfully attached
• MS::kInvalidParameter if the MObject does not represent a valid Maya object or if the function set is not allowed to attach to this MObject

Member Function Documentation

MFn::Type type ( ) const

virtual

Function set type.

Return the class type : MFn::kMesh.

Reimplemented from MFnDagNode.

const char * className ( ) const

protectedvirtual

Class name.

Return the class name : "MFnMesh".

Reimplemented from MFnDagNode.

MObject create	(	int	numVertices,
		int	numPolygons,
		const MFloatPointArray &	vertexArray,
		const MIntArray &	polygonCounts,
		const MIntArray &	polygonConnects,
		MObject	parentOrOwner = MObject::kNullObj,
		MStatus *	ReturnStatus = NULL
	)

Creates a new polygonal mesh given an array of vertices and polygon connection information and sets this function set to operate on the new surface.

This method is meant to be as efficient as possible and thus assumes that all the given data is topologically correct.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

Parameters

[in]	numVertices	number of vertices
[in]	numPolygons	number of polygons
[in]	vertexArray	point (vertex) array. This should include all the vertices in the mesh, and no extras. For example, a cube could have the vertices: { (-1,-1,-1), (1,-1,-1), (1,-1,1), (-1,-1,1), (-1,1,-1), (-1,1,1), (1,1,1), (1,1,-1) }
[in]	polygonCounts	array of vertex counts for each polygon. For example the cube would have 6 faces, each of which had 4 verts, so the polygonCounts would be {4,4,4,4,4,4}.
[in]	polygonConnects	array of vertex connections for each polygon. For example, in the cube, we have 4 vertices for every face, so we list the vertices for face0, face1, etc consecutively in the array. These are specified by indexes in the vertexArray: e.g for the cube: { 0, 1, 2, 3, 4, 5, 6, 7, 3, 2, 6, 5, 0, 3, 5, 4, 0, 4, 7, 1, 1, 7, 6, 2 }
[in]	parentOrOwner	parent of the polygon that will be created
[out]	ReturnStatus	Status code

Returns

• If parentOrOwner is NULL then the transform for this surface is returned
• If parentOrOwner is a DAG object then the new surface shape is returned
• The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

• MS::kSuccess The method was successful.
• MS::kLicenseFailure Application not licensed for attempted operation
• MS::kInvalidParameter Array length does not match given item count; parentOrOwner was not valid; or there was no model present to add the object to
• MS::kFailure An object error has occurred.
• MS::kInsufficientMemory Insufficient memory to complete this method

Examples:

MObject create	(	int	numVertices,
		int	numPolygons,
		const MPointArray &	vertexArray,
		const MIntArray &	polygonCounts,
		const MIntArray &	polygonConnects,
		MObject	parentOrOwner = MObject::kNullObj,
		MStatus *	ReturnStatus = NULL
	)

Creates a new polygonal mesh given an array of vertices and polygon connection information and sets this function set to operate on the new surface.

This method is meant to be as efficient as possible and thus assumes that all the given data is topologically correct.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

Parameters

[in]	numVertices	number of vertices
[in]	numPolygons	number of polygons
[in]	vertexArray	point (vertex) array. This should include all the vertices in the mesh, and no extras. For example, a cube could have the vertices: { (-1,-1,-1), (1,-1,-1), (1,-1,1), (-1,-1,1), (-1,1,-1), (-1,1,1), (1,1,1), (1,1,-1) }
[in]	polygonCounts	array of vertex counts for each polygon. For example the cube would have 6 faces, each of which had 4 verts, so the polygonCounts would be {4,4,4,4,4,4}.
[in]	polygonConnects	array of vertex connections for each polygon. For example, in the cube, we have 4 vertices for every face, so we list the vertices for face0, face1, etc consecutively in the array. These are specified by indexes in the vertexArray: e.g for the cube: { 0, 1, 2, 3, 4, 5, 6, 7, 3, 2, 6, 5, 0, 3, 5, 4,0, 4, 7, 1, 1, 7, 6, 2 }
[in]	parentOrOwner	parent of the polygon that will be created
[out]	ReturnStatus	Status code

Returns

• If parentOrOwner is NULL then the transform for this surface is returned
• If parentOrOwner is a DAG object then the new surface shape is returned
• The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

• MS::kSuccess The method was successful.
• MS::kLicenseFailure Application not licensed for attempted operation
• MS::kInvalidParameter Array length does not match given item count; parentOrOwner was not valid; or there was no model present to add the object to
• MS::kFailure An object error has occurred.
• MS::kInsufficientMemory Insufficient memory to complete this method

MObject create	(	int	numVertices,
		int	numPolygons,
		const MPointArray &	vertexArray,
		const MIntArray &	polygonCounts,
		const MIntArray &	polygonConnects,
		bool	storeDoubles,
		MObject	parentOrOwner = MObject::kNullObj,
		MStatus *	ReturnStatus = NULL
	)

Creates a new polygonal mesh given an array of vertices and polygon connection information and sets this function set to operate on the new surface.

This method is meant to be as efficient as possible and thus assumes that all the given data is topologically correct.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

Parameters

[in]	numVertices	number of vertices
[in]	numPolygons	number of polygons
[in]	vertexArray	point (vertex) array. This should include all the vertices in the mesh, and no extras. For example, a cube could have the vertices: { (-1,-1,-1), (1,-1,-1), (1,-1,1), (-1,-1,1), (-1,1,-1), (-1,1,1), (1,1,1), (1,1,-1) }
[in]	polygonCounts	array of vertex counts for each polygon. For example the cube would have 6 faces, each of which had 4 verts, so the polygonCounts would be {4,4,4,4,4,4}.
[in]	polygonConnects	array of vertex connections for each polygon. For example, in the cube, we have 4 vertices for every face, so we list the vertices for face0, face1, etc consecutively in the array. These are specified by indexes in the vertexArray: e.g for the cube: { 0, 1, 2, 3, 4, 5, 6, 7, 3, 2, 6, 5, 0, 3, 5, 4,0, 4, 7, 1, 1, 7, 6, 2 }
[in]	storeDoubles	Whether to store the vertex data at double precision internally.
[in]	parentOrOwner	parent of the polygon that will be created
[out]	ReturnStatus	Status code

Returns

• If parentOrOwner is NULL then the transform for this surface is returned
• If parentOrOwner is a DAG object then the new surface shape is returned
• The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

• MS::kSuccess The method was successful.
• MS::kLicenseFailure Application not licensed for attempted operation
• MS::kInvalidParameter One of the following parameter errors

• Array length does not match given item count
• parentOrOwner was not valid
• There was no model present to add the object to

• MS::kFailure An object error has occurred.
• MS::kInsufficientMemory Insufficient memory to complete this method

MObject create	(	int	numVertices,
		int	numPolygons,
		const MFloatPointArray &	vertexArray,
		const MIntArray &	polygonCounts,
		const MIntArray &	polygonConnects,
		const MFloatArray &	uArray,
		const MFloatArray &	vArray,
		MObject	parentOrOwner = MObject::kNullObj,
		MStatus *	ReturnStatus = NULL
	)

Creates a new polygonal mesh given an array of vertices, polygon connection information, UV information, and sets this function set to operate on the new surface.

This method is meant to be as efficient as possible and thus assumes that all the given data is topologically correct.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

The uv arrays must be of equal size. After using this method to create the mesh and the UV values, you can call assignUVs to assign the corresponding UV ids to the geometry.

Parameters

[in]	numVertices	number of vertices
[in]	numPolygons	number of polygons
[in]	vertexArray	point (vertex) array. This should include all the vertices in the mesh, and no extras. For example, a cube could have the vertices: { (-1,-1,-1), (1,-1,-1), (1,-1,1), (-1,-1,1), (-1,1,-1), (-1,1,1), (1,1,1), (1,1,-1) }
[in]	polygonCounts	array of vertex counts for each polygon. For example the cube would have 6 faces, each of which had 4 verts, so the polygonCounts would be {4,4,4,4,4,4}.
[in]	polygonConnects	array of vertex connections for each polygon. For example, in the cube, we have 4 vertices for every face, so we list the vertices for face0, face1, etc consecutively in the array. These are specified by indexes in the vertexArray: e.g for the cube: { 0, 1, 2, 3, 4, 5, 6, 7, 3, 2, 6, 5, 0, 3, 5, 4,0, 4, 7, 1, 1, 7, 6, 2 }
[in]	uArray	The array of u values to be set
[in]	vArray	The array of v values to be set
[in]	parentOrOwner	parent of the polygon that will be created
[out]	ReturnStatus	Status code

Returns

• If parentOrOwner is NULL then the transform for this surface is returned
• If parentOrOwner is a DAG object then the new surface shape is returned
• The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

• MS::kSuccess The method was successful.
• MS::kLicenseFailure Application not licensed for attempted operation
• MS::kInvalidParameter Array length does not match given item count; parentOrOwner was not valid; or there was no model present to add the object to
• MS::kFailure An object error has occurred.
• MS::kInsufficientMemory Insufficient memory to complete this method

MObject create	(	int	numVertices,
		int	numPolygons,
		const MPointArray &	vertexArray,
		const MIntArray &	polygonCounts,
		const MIntArray &	polygonConnects,
		const MFloatArray &	uArray,
		const MFloatArray &	vArray,
		MObject	parentOrOwner = MObject::kNullObj,
		MStatus *	ReturnStatus = NULL
	)

Creates a new polygonal mesh given an array of vertices, polygon connection information, UV information, and sets this function set to operate on the new surface.

This method is meant to be as efficient as possible and thus assumes that all the given data is topologically correct.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

The uv arrays must be of equal size. After using this method to create the mesh and the UV values, you can call assignUVs to assign the corresponding UV ids to the geometry.

Parameters

[in]	numVertices	number of vertices
[in]	numPolygons	number of polygons
[in]	vertexArray	point (vertex) array. This should include all the vertices in the mesh, and no extras. For example, a cube could have the vertices: { (-1,-1,-1), (1,-1,-1), (1,-1,1), (-1,-1,1), (-1,1,-1), (-1,1,1), (1,1,1), (1,1,-1) }
[in]	polygonCounts	array of vertex counts for each polygon. For example the cube would have 6 faces, each of which had 4 verts, so the polygonCounts would be {4,4,4,4,4,4}.
[in]	polygonConnects	array of vertex connections for each polygon. For example, in the cube, we have 4 vertices for every face, so we list the vertices for face0, face1, etc consecutively in the array. These are specified by indexes in the vertexArray: e.g for the cube: { 0, 1, 2, 3, 4, 5, 6, 7, 3, 2, 6, 5, 0, 3, 5, 4,0, 4, 7, 1, 1, 7, 6, 2 }
[in]	uArray	The array of u values to be set
[in]	vArray	The array of v values to be set
[in]	parentOrOwner	parent of the polygon that will be created
[out]	ReturnStatus	Status code

Returns

• If parentOrOwner is NULL then the transform for this surface is returned
• If parentOrOwner is a DAG object then the new surface shape is returned
• The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

• MS::kSuccess The method was successful.
• MS::kLicenseFailure Application not licensed for attempted operation
• MS::kInvalidParameter Array length does not match given item count; parentOrOwner was not valid; or there was no model present to add the object to
• MS::kFailure An object error has occurred.
• MS::kInsufficientMemory Insufficient memory to complete this method

MObject generateSmoothMesh	(	MObject	parentOrOwner = MObject::kNullObj,
		MMeshSmoothOptions *	options = NULL,
		MStatus *	ReturnStatus = NULL
	)

Creates a new polygonal mesh using either the Smooth Mesh Preview attributes of this mesh or a set of options specified in an MMeshSmoothOptions object.

Unlike the MFnMesh::create functions, this function does not set this function set to operate on the new surface.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

Parameters

[in]	parentOrOwner	parent of the polygon that will be created
[in]	options	Set of options to use when generating the smoothed mesh
[out]	ReturnStatus	Status code

Returns

• If parentOrOwner is NULL then the transform for this surface is returned
• If parentOrOwner is a DAG object then the new surface shape is returned
• The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

• MS::kSuccess The method was successful.
• MS::kLicenseFailure Application not licensed for attempted operation
• MS::kInvalidParameter parentOrOwner was not valid; or there was no model present to add the object to
• MS::kFailure An object error has occurred, or the mesh has no geometry to smooth.
• MS::kInsufficientMemory Insufficient memory to complete this method

MStatus getSmoothMeshDisplayOptions

(

MMeshSmoothOptions &

options

)

const

Retrieve the current display smoothing options for the mesh.

Parameters

[out]

options

storge for the options

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus setSmoothMeshDisplayOptions

(

const MMeshSmoothOptions &

options

)

Sets the current display smoothing options for the mesh.

Parameters

[in]

options

Options to set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MObject addPolygon	(	const MPointArray &	vertexArray,
		bool	mergeVertices = true,
		double	pointTolerance = kMFnMeshPointTolerance,
		MObject	parentOrOwner = MObject::kNullObj,
		MStatus *	ReturnStatus = NULL
	)

Adds a new polygon to this polygonal mesh.

If there is no current geometry then a new polygonal mesh is created and parentOrOwner is used to specify the owner of the new surface. If parentOrOwner is NULL or a DAG parent is specified, then a new transform will be created in the DAG and returned. If the parentOrOwner is kMeshData then the new surface will become its data and the geometry will be returned.

If we are adding to an existing polygonal mesh then parentOrOwner is ignored and the geometry is returned.

Parameters

[in]	vertexArray	array of ordered vertices that make up the polygon
[in]	mergeVertices	If true then if a vertex falls within pointTolerance of an existing vertex then the existing vertex is reused.
[in]	pointTolerance	specifies how close verticies have to be to before they are merged. This merging is only done if mergeVerticies is true.
[in]	parentOrOwner	the DAG parent or kMeshData the new surface will belong to
[out]	ReturnStatus	status code

Returns

The transform if one is created, otherwise the geometry.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MObject addPolygon	(	const MPointArray &	vertexArray,
		int &	faceIndex,
		bool	mergeVertices = true,
		double	pointTolerance = kMFnMeshPointTolerance,
		MObject	parentOrOwner = MObject::kNullObj,
		MStatus *	ReturnStatus = NULL
	)

Adds a new polygon to this polygonal mesh.

Return an index of the created polygon.

If there is no current geometry then a new polygonal mesh is created and parentOrOwner is used to specify the owner of the new surface. If parentOrOwner is NULL or a DAG parent is specified, then a new transform will be created in the DAG and returned. If the parentOrOwner is kMeshData then the new surface will become its data and the geometry will be returned.

If we are adding to an existing polygonal mesh then parentOrOwner is ignored and the geometry is returned.

Parameters

[in]	vertexArray	Array of ordered vertices that make up the polygon.
[out]	faceIndex	Index of the newly added polygon.
[in]	mergeVertices	If true then if a vertex falls within pointTolerance of an existing vertex then the existing vertex is reused.
[in]	pointTolerance	Specifies how close verticies have to be to before they are merged. This merging is only done if mergeVerticies is true.
[in]	parentOrOwner	The DAG parent or kMeshData the new surface will belong to.
[out]	ReturnStatus	Status code.

Returns

The transform if one is created, otherwise the geometry.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MObject addPolygon	(	const MPointArray &	vertexArray,
		const MIntArray &	loopCounts,
		int &	faceIndex,
		bool	mergeVertices = true,
		double	pointTolerance = kMFnMeshPointTolerance,
		MObject	parentOrOwner = MObject::kNullObj,
		MStatus *	ReturnStatus = NULL
	)

Adds a new polygon to this polygonal mesh.

Return an index of the created polygon.

This version of addPolygon() allows for the creation of faces with holes. The loopCounts argument is used for this. loopCounts is an array of vertex counts. The first entry gives the count of vertices that make up the exterior of the polygon (using that many entries in vertexArray). The following entries in loopCounts give the count of vertices that make up each hole, using the following entries in vertexArray.

Therefore the sum of the entries of loopCounts should equal the total length of vertexArray.

If loopCounts is an empty array, it is treated as if it had one entry equal to the length of vertexArray i.e. the face has no holes.

Note that holes should normally be specified with the opposite winding order to the exterior polygon.

If there is no current geometry then a new polygonal mesh is created and parentOrOwner is used to specify the owner of the new surface. If parentOrOwner is NULL or a DAG parent is specified, then a new transform will be created in the DAG and returned. If the parentOrOwner is kMeshData then the new surface will become its data and the geometry will be returned.

If we are adding to an existing polygonal mesh then parentOrOwner is ignored and the geometry is returned.

Parameters

[in]	vertexArray	Array of ordered vertices that make up the polygon.
[in]	loopCounts	Array of vertex loop counts.
[out]	faceIndex	Index of the newly added polygon.
[in]	mergeVertices	If true then if a vertex falls within pointTolerance of an existing vertex then the existing vertex is reused.
[in]	pointTolerance	Specifies how close verticies have to be to before they are merged. This merging is only done if mergeVerticies is true.
[in]	parentOrOwner	The DAG parent or kMeshData the new surface will belong to.
[out]	ReturnStatus	Status code.

Returns

The transform if one is created, otherwise the geometry.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus addHoles	(	int	faceIndex,
		const MPointArray &	vertexArray,
		const MIntArray &	loopCounts,
		bool	mergeVertices = true,
		double	pointTolerance = kMFnMeshPointTolerance
	)

Adds holes to a mesh polygon.

loopCounts is an array of vertex counts. The first entry gives the count of vertices that make up the first hole to add to the polygon (using that many entries in vertexArray). The following entries in loopCounts give the count of vertices that make up each remaining hole, using the following entries in vertexArray.

Therefore the sum of the entries of loopCounts should equal the total length of vertexArray.

Note that holes should normally be specified with the opposite winding order to the exterior polygon.

Parameters

[in]	faceIndex	Index of the face to which to add holes.
[in]	vertexArray	Array of ordered vertices that make up the polygon.
[in]	loopCounts	Array of vertex loop counts.
[in]	mergeVertices	If true then if a vertex falls within pointTolerance of an existing vertex then the existing vertex is reused.
[in]	pointTolerance	Specifies how close verticies have to be to before they are merged. This merging is only done if mergeVerticies is true.

Returns

Status code.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus deleteFace	(	int	faceId,
		MDGModifier *	modifier = NULL
	)

Delete this face.

The method will return failure if an attempt is made to delete the last polygonal face in the object.

Parameters

[in]	faceId	The face to delete
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid face index or attempt to delete mesh's last face.
• MS::kFailure An object error has occurred.

MStatus deleteEdge	(	int	edgeId,
		MDGModifier *	modifier = NULL
	)

Delete this edge.

Parameters

[in]	edgeId	The edge to delete
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid edge id.
• MS::kFailure An object error has occurred.

MStatus deleteVertex	(	int	vertexId,
		MDGModifier *	modifier = NULL
	)

Delete this vertex.

Parameters

[in]	vertexId	The object-relative (mehs-relative/global) vertex index to delete
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid vertex id.
• MS::kFailure An object error has occurred.

MStatus split	(	MIntArray &	placements,
		MIntArray &	edgeList,
		MFloatArray &	edgeFactors,
		MFloatPointArray &	internalPoints
	)

This function splits a set of edges and faces in a continuous manner.

The elements of the placements array must be elements of the SplitPlacement enumeration. For each SplitPlacement::kOnEdge element in the placements array, an equivalent edge ID and factor must be included in the edgeList and edgeFactors arrays. Similarly for SplitPlacement::kInternalPoint elements and the internalPoints array. The equivalent elements must be in the same order in all three arrays so that the first SplitPlacement::kOnEdge element in the placements array maps to the first elements in the edgeList and edgeFactors arrays. If one of the vertices cannot be created, the whole algorithm fails. The same edge cannot be split more than once.

The split must also start and end on an edge. This means that the first and last elements in the placements array must be SplitPlacement::kOnEdge values. If the placements array does not start and end on an edge then the code will still succeed but the mesh will not be split.

NOTE: the algorithm used by this method is the same as the polySplit command and has similar limitations.

Parameters

[in]	placements	array that contains elements of the SplitPlacement enumeration. They represent where to place the new vertices for the split.
[in]	edgeList	array of edge IDs to be split, in order of their appearance in the split. There must be as many elements in this array as there are SplitPlacement::kOnEdge elements in the placements array.
[in]	edgeFactors	array of factors in the range [0,1] that represent how far along each edge must the split be done. This array must have the same number of elements as the edgeList array.
[in]	internalPoints	array of positions for the vertices that will be added inside existing faces. There must be as many elements in this array as there are SplitPlacement::kInternalPoint elements in the placements array. This array can be empty. Internal points should be specified on the face between the previous edge id and the next edge id.

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter One or more of the edge IDs are not on the mesh; one or more of the edge factors are not within the [0,1] range; the given placements list is empty; the array sizes are not appropriate; or the split algorithm could not be completed successfully
• MS::kFailure An object error has occurred; or the mesh shape has no geometry to work on

Examples:

MStatus subdivideFaces	(	MIntArray &	faceList,
		int	divisionCount
	)

This function subdivides multiple faces.

This method only accepts faces that are three of four-sided. The operation adds a vertex in the middle of each given face and connects it to the middle of every edge in the given face. This results in three or four new faces for each original face.

Parameters

[in]	faceList	array of face IDs to subdivide
[in]	divisionCount	number of subsequent subdivisions to do

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter The given subdivision count is less than 1; the given faceIDs are not on the mesh; the given face list is empty; or the given information cannot produce a valid subdivision of the faces
• MS::kFailure An object error has occurred; or the mesh shape has no geometry to work on

Examples:

MStatus subdivideEdges	(	MIntArray &	edgeList,
		int	divisionCount
	)

This function subdivides edges at regular intervals.

The divisionCount argument is the number of subdivisions per edges and represents the number of new vertices created on each edge.

For example, a divisionCount of 2 will add a new vertex on every edge in the edgeList 33% along the edges and a new vertex at 67% along the edges.

Parameters

[in]	edgeList	array of edge component IDs to be subdivided
[in]	divisionCount	number of subsequent subdivisions to do

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter The given edge IDs are not on the mesh; the given subdivision count is less than 1; the given edge list is empty; or the subdivision could not be completed successfully
• MS::kFailure An object error has occurred; or the mesh shape has no geometry to work on

Examples:

MStatus extrudeFaces	(	MIntArray &	faceList,
		int	extrusionCount,
		MFloatVector *	translation,
		bool	extrudeTogether,
		float	thickness = 0.0f,
		float	offset = 0.0f
	)

This function extrudes a set of faces.

The resulting mesh will have extra parallelograms coming out of the edges of the given polygons going to the new extruded edges. The extrusionCount argument is the number of subsequent extrusions per polygon and represents the number of faces that will be created for each edge of the polygons in the list.

The difference between using thickness or offset instead of providing a vector with the translation variable is that the translation will be applied to each vertex in the extrusion along its local direction. This can result in vertices being moved the same distance, but the angles between the original components are not maintained so the overall shape is not the same. Both the thickness and offset variables will attempt to move the components a distance that will maintain angles between edges at the border of the extrusion.

Parameters

[in]	faceList	array of face component IDs to be extruded
[in]	extrusionCount	number of subsequent extrusions to do
[in]	translation	translation vector to apply to the extruded elements. This is a world-space translation. Use NULL if not required.
[in]	extrudeTogether	sets whether the components should be extruded individually or together, as if one complex component was being extruded.
[in]	thickness	Faces are moved outwards this distance from their original position to give the object a consistent thickness.
[in]	offset	Faces are moved this distance towards the inside of the face.

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter The given face IDs are not on the mesh; the given extrusion count is less than 1; the given face list is empty; or the extrusion could not be completed successfully
• MS::kFailure An object error has occurred; or the mesh shape has no geometry to work on

Examples:

MStatus extrudeEdges	(	MIntArray &	edgeList,
		int	extrusionCount,
		MFloatVector *	translation,
		bool	extrudeTogether,
		float	thickness = 0.0f,
		float	offset = 0.0f
	)

This function extrudes edges.

The resulting mesh will have extra parallelograms coming out of the given edges and going to the new extruded edges. The extrusionCount argument is the number of subsequent extrusions per edges and represents the number of polygons that will be created from each given edge to the extruded edges.

The difference between using thickness or offset instead of providing a vector with the translation variable is that the translation will be applied to each vertex in the extrusion along its local direction. This can result in vertices being moved the same distance, but the angles between the original components are not maintained so the overall shape is not the same. Both the thickness and offset variables will attempt to move the components a distance that will maintain angles between edges at the border of the extrusion.

Parameters

[in]	edgeList	array of edge component IDs to be extruded
[in]	extrusionCount	number of subsequent extrusions to do
[in]	translation	translation vector to apply to the extruded elements. This is a world-space translation. Use NULL if not required.
[in]	extrudeTogether	sets whether the components should be extruded individually or together, as if one complex component was being extruded.
[in]	thickness	Edges are moved this distance in the direction of the connected face normals. original position to give the object a consistent thickmess.
[in]	offset	Edges are moved this distance in the opposite direction of the edge.

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter The given edge IDs are not on the mesh; the given extrusion count is less than 1; the given edge list is empty; or the extrusion could not be completed successfully.
• MS::kFailure An object error has occurred; or the mesh shape has no geometry to work on

Examples:

MStatus duplicateFaces	(	MIntArray &	faceList,
		MFloatVector *	translation
	)

This function duplicates a set of faces and detaches them from the rest of the mesh.

The resulting mesh will contain one more independant piece of geometry.

Parameters

[in]	faceList	array of face component IDs to be duplicated
[in]	translation	translation vector to apply to the duplicated elements. This is a world-space translation. Use NULL if not required.

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter The given face IDs are not on the mesh; the given face list is empty; or the duplication could not be completed successfully
• MS::kFailure An object error has occurred; or the mesh shape has no geometry to work on

Examples:

MStatus extractFaces	(	MIntArray &	faceList,
		MFloatVector *	translation
	)

This function detaches a set of faces from the mesh so that the resulting mesh will contain one more independant piece of geometry and leaves a hole where the faces use to be.

Parameters

[in]	faceList	array of face component IDs to be extracted
[in]	translation	translation vector to apply to the extracted elements. This is a world-space translation. Use NULL if not required.

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter The given face IDs are not on the mesh; the given face list is empty; or the extraction could not be completed successfully
• MS::kFailure An object error has occurred; or the mesh shape has no geometry to work on

Examples:

MStatus collapseFaces

(

MIntArray &

faceList

)

This function collapse faces into vertices.

Non-adjacent faces will be collapsed individually so that each pieces of adjacent faces turn into one vertex.

Parameters

[in]

faceList

array of face component IDs to be collapsed

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter The given face IDs are not on the mesh; the given face list is empty; or the collapse could not be completed successfully
• MS::kFailure An object error has occurred; or the mesh shape has no geometry to work on

Examples:

MStatus collapseEdges

(

MIntArray &

edgeList

)

This function collapse edges into vertices.

The two vertices that create each given edge are replaced in turn by one vertex placed at the average of the two initial vertex.

Parameters

[in]

edgeList

array of edge component IDs to be collapsed

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter The given edge IDs are not on the mesh; the given edge list is empty; or the collapse could not be completed successfully.
• MS::kFailure An object error has occurred; or the mesh shape has no geometry to work on

Examples:

int numVertices

(

MStatus *

ReturnStatus = NULL

)

const

Returns the number of vertices in the vertex list for this mesh.

This number will be the same as the length of the vertex array returned with the getPoints method.

Parameters

[out]

ReturnStatus

Status code

Returns

The number of vertices of the mesh

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

int numEdges

(

MStatus *

ReturnStatus = NULL

)

const

Returns the number of edges for this mesh.

Parameters

[out]

ReturnStatus

Status code

Returns

The number of edges for this mesh

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

int numPolygons

(

MStatus *

ReturnStatus = NULL

)

const

Returns the number of polygons for this mesh.

Parameters

[out]

ReturnStatus

Status code

Returns

The number of polygons for this mesh

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

int numFaceVertices

(

MStatus *

ReturnStatus = NULL

)

const

Returns the number of face-vertices for this mesh.

Parameters

[out]

ReturnStatus

Status code

Returns

The number of face-vertices for this mesh

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

int polygonVertexCount	(	int	polygonId,
		MStatus *	ReturnStatus = NULL
	)		const

Returns the number of vertices for the specified polygon.

Parameters

[in]	polygonId	The polygon index
[out]	ReturnStatus	Status code

Returns

The number of vertices for the specified polygon

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid polygon index.
• MS::kFailure An object error has occurred.

Examples:

int numUVs

(

MStatus *

ReturnStatus = NULL

)

const

Returns the number of texture (uv) coordinates for this mesh.

The uv's are stored in a list which is referenced by polygons requiring textures on a per-polygon per-vertex basis. This method returns the number of elements in this list.

Parameters

[out]

ReturnStatus

Status code

Returns

The number of texture coordinates

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

int numUVs	(	const MString &	uvSet,
		MStatus *	ReturnStatus = NULL
	)		const

Returns the number of texture (uv) coordinates for this mesh.

The uv's are stored in a list which is referenced by polygons requiring textures on a per-polygon per-vertex basis. This method returns the number of elements in this list.

Parameters

[in]	uvSet	UV set to work with
[out]	ReturnStatus	Status code

Returns

The number of texture coordinates

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

int numColors

(

MStatus *

ReturnStatus = NULL

)

const

Returns the number of (vertex) color for this mesh.

The color are stored in a list which is referenced by polygons requiring color on a per-polygon per-vertex basis. This method returns the number of elements in this list.

Parameters

[out]

ReturnStatus

Status code

Returns

The number of colors

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

int numColors	(	const MString &	colorSet,
		MStatus *	ReturnStatus = NULL
	)		const

Returns the number of colors (vertex data) for this mesh.

The colors are stored in a list which is referenced by polygons requiring textures on a per-polygon per-vertex basis. This method returns the number of elements in this list.

Parameters

[in]	colorSet	Color set to work with
[out]	ReturnStatus	Status code

Returns

The number of colors

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

int numNormals

(

MStatus *

ReturnStatus = NULL

)

const

Returns the number of per-polygon per-vertex normals for this mesh.

This number will correspond to the length of the normal array returned by getNormals( normalArray, space ).

This method is not threadsafe.

Parameters

[out]

ReturnStatus

Status code

Returns

The number of per-polygon per-vertex normals

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

bool hasColorChannels	(	const MString &	colorSet,
		MStatus *	ReturnStatus = NULL
	)		const

This method returns if the color set has RGB components.

Parameters

[in]	colorSet	Color set to work with
[out]	ReturnStatus	Status code

Returns

• true The color set has RGB components
• false The color set doesn't have RGB components

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

bool hasAlphaChannels	(	const MString &	colorSet,
		MStatus *	ReturnStatus = NULL
	)		const

This method returns true if the color set has Alpha component.

Parameters

[in]	colorSet	Color set to work with
[out]	ReturnStatus	Status code

Returns

• true The color set has Alpha component
• false The color set doesn't have Alpha component

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MFnMesh::MColorRepresentation getColorRepresentation	(	const MString &	colorSet,
		MStatus *	ReturnStatus = NULL
	)		const

This method returns the color representation (RGB/RGBA/A) of a color set.

Parameters

[in]	colorSet	Color set to work with
[out]	ReturnStatus	Status code

Returns

• kAlpha The color set contains only Alpha component
• kRGB The color set contains only RGB components
• kRGBA The color set contains RGBA components

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure The color set doesn't exist

bool isColorClamped	(	const MString &	colorSet,
		MStatus *	ReturnStatus = NULL
	)		const

This method returns if the color set has its R,G,B,and A components clamped in the range from 0 to 1.

Parameters

[in]	colorSet	Color set to work with
[out]	ReturnStatus	Status code

Returns

• true All components in the color set are clamped
• false All components in the color set are not clamped

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus setIsColorClamped	(	const MString &	colorSet,
		bool	clamped
	)

Set the color set to be clamped.

Parameters

[in]	colorSet	Color set to work with
[in]	clamped	If the color set should be set clamped

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getTriangles	(	MIntArray &	triangleCounts,
		MIntArray &	triangleVertices
	)		const

Returns the number of triangles for every polygon face and the vertex Ids of each triangle vertex.

The triangleVertices array holds each vertex for each triangle in sequence, so it has three times as many elements as there are triangles. (i.e. three times the sum of the elements of the triangleCounts array)

This method is not threadsafe.

Parameters

[out]	triangleCounts	The number of triangles for each polygon face
[out]	triangleVertices	The triangle vertex Ids for each triangle

Returns

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getTriangleOffsets	(	MIntArray &	triangleCounts,
		MIntArray &	triangleIndices
	)		const

Returns the number of triangles for every polygon face and the offset into the vertex indices array for each triangle vertex (see getVertices()).

The triangleVertices array holds each vertex for each triangle in sequence, so it has three times as many elements as there are triangles. (i.e. three times the sum of the elements of the triangleCounts array)

This method is not threadsafe.

Parameters

[out]	triangleCounts	The number of triangles for each polygon face
[out]	triangleIndices	The index array for each triangle in face vertex space

Returns

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MStatus booleanOp	(	BoolOperation	op,
		MFnMesh &	mesh1,
		MFnMesh &	mesh2
	)

This method is obsolete.

Deprecated:

This method uses Maya's legacy boolean algorithm. Use MFnMesh::booleanOps instead to choose between Maya's newer boolean algorithm and the legacy algorithm.

Computes the boolean between two meshes. The result is stored in the current MFnMesh instance. The current instance must point to a valid mesh, which can be empty. Such a mesh can result from using MFnMesh::create() for example.

The union operation adds the two meshes together. The difference operation subtracts the second mesh from the first. The intersection operation takes only the parts of the two mesh volumes which overlap.

The operation is performed in object space, so transformations applied by the DAG hierarchy are ignored. If you want transformations to be taken into account then you will have to first bake them onto the geometry, for example by using the makeIdentity command.

Parameters

[in]	op	Operation to perform (kUnion, kDifference or kIntersection)
[in]	mesh1	The first mesh in the boolean operation
[in]	mesh2	The second mesh in the boolean operation

Returns

Status Code

Status Codes:

• MS::kFailure Mesh1, mesh2, this mesh is invalid, or the boolean operation failed.
• MS::kSuccess Operation successful.

MStatus booleanOps	(	BoolOperation	op,
		const MObjectArray &	meshes,
		bool	useLegacy = false
	)

Computes the boolean between multiple meshes.

The result is stored in the current MFnMesh instance. The current instance must point to a valid mesh, which can be empty. Such a mesh can result from using MFnMesh::create() for example.

The union operation adds the meshes in the array together. The difference operation subtracts the proceeding meshes from the first mesh in the array. The intersection operation takes only the parts of the mesh volumes which overlap. The current MFnMesh instance is not used as input to the boolean operation.

The operation is performed in object space, so transformations applied by the DAG hierarchy are ignored. If you want transformations to be taken into account then you will have to first bake them onto the geometry, for example by using the makeIdentity command.

Parameters

[in]	op	Operation to perform (kUnion, kDifference or kIntersection)
[in]	meshes	The meshes for the boolean operation
[in]	useLegacy	Flag to indicate if Maya's legacy boolean algorithm should be used. The legacy algorithm produces lower quality results, and should only be used when required to match boolean results from versions of Maya prior to 2015.

Returns

Status Code

Status Codes:

• MS::kFailure Any of the meshes in the array are invalid, this mesh is invalid, meshes contains less than two elements, or the boolean operation failed.
• MS::kSuccess Operation successful.
• MS::kInvalidParameter meshes array contains too many or too few items for the boolean operation, an element in the mesh array was invalid, or a MFnMesh function set could not be attached to it.

MMeshIsectAccelParams uniformGridParams ( int  xDiv, int  yDiv, int  zDiv  )

static

Creates a MMeshIsectAccelParams configuration object that can be passed to several of the geometric query methods available on MFnMesh.

For example, the MFnMesh closest point and intersection methods can optionally make use of this object to speed up their operation.

This object specifies the number of voxel cells to be used in the x, y, and z dimensions. The grid acceleration structure will be cached with the mesh, so that if the same MMeshIsectAccelParams configuration is used on the next call, the acceleration structure will not need to be rebuilt.

To see details of the acceleration structure, including build time and memory usage, refer to the cachedIntersectionAcceleratorInfo() method.

Parameters

[in]	xDiv	Number of voxels in the x direction
[in]	yDiv	Number of voxels in the y direction
[in]	zDiv	Number of voxels in the z direction

Returns

Intersection accelerator object.

MMeshIsectAccelParams autoUniformGridParams ( )

static

Creates a MMeshIsectAccelParams configuration object that can be passed to several of the geometric query methods on MFnMesh to speed up their operation.

For example, the MFnMesh closest point and intersection methods can optionally make use of this object.

This object specifies that a uniform voxel grid structure should be used by these routines, and that the system should automatically determine the number of voxel cells to use based on the density of triangles in the mesh. The grid acceleration structure will be cached with the mesh, so that if the same MMeshIsectAccelParams configuration is used on the next call, the acceleration structure will not need to be rebuilt.

To see details of the acceleration structure, including build time and memory usage, refer to the cachedIntersectionAcceleratorInfo() method.

Returns

Intersection accelerator object.

Examples:

bool closestIntersection	(	const MFloatPoint &	raySource,
		const MFloatVector &	rayDirection,
		const MIntArray *	faceIds,
		const MIntArray *	triIds,
		bool	idsSorted,
		MSpace::Space	space,
		float	maxParam,
		bool	testBothDirections,
		MMeshIsectAccelParams *	accelParams,
		MFloatPoint &	hitPoint,
		float *	hitRayParam,
		int *	hitFace,
		int *	hitTriangle,
		float *	hitBary1,
		float *	hitBary2,
		float	tolerance = 1e-6,
		MStatus *	ReturnStatus = NULL
	)

Finds the closest intersection of a ray starting at raySource and travelling in rayDirection with the mesh.

If faceIds is non-NULL and triIds is NULL, then only the faces specified by faceIds will be considered for intersection. If both faceIds and triIds are non-NULL, then each pair of entries will be taken as a (face,triangle) pair to be considered for intersection, where triangles are numbered on each face starting from 0. Thus, the face-triangle pair (10,0) means the first triangle on face 10. If both faceIds and triIds are NULL, then all face-triangles in the mesh will be considered.

The maxParam and testBothDirections flags can be used to control the radius of the search around the raySource point.

If accelParams is NULL, the search proceeds by testing all applicable face-triangles looking for intersections. If an MMeshIsectAccelParams structure is passed in via this parameter, the mesh builds an intersection acceleration structure based on the description provided by the parameter object. This acceleration structure is used to speed up the intersection operation, sometimes by a factor of several hundred over the non-accelerated case. Once created, the acceleration structure is cached, and will be reused the next time this method (or anyIntersection() or allIntersections()) is called with an identically-configured MMeshIsectAccelParams object. If a different MMeshIsectAccelParams object is used, then the acceleration structure will be deleted and re-created according to the new settings. Once created, the acceleration structure will persist until either the object is destroyed (or rebuilt by a construction history operation), or if the freeCachedIntersectionAccelerator() method is called. The cachedIntersectionAcceleratorInfo() and globalIntersectionAcceleratorsInfo() methods provide useful information about the resource usage of individual acceleration structures, and of all such structures in the system.

If the ray hits the mesh, the details of the closest intersection point to the raySource will be returned via the hitPoint, hitRayParam, hitFace, hitTriangle, hitBary1, and hitBary2 parameters. These parameters completely describe where the hit occurred.

Parameters

[in]	raySource	Starting point for the ray
[in]	rayDirection	Direction of the ray
[in]	faceIds	(see above) if non-NULL, describes a subset of faces to consider for intersection.
[in]	triIds	(see above) if non-NULL, then along with faceIds describes a set of face-triangles to consider for intersection. If triIds is non-NULL, then faceIds must be non-NULL as well, otherwise an error will be generated.
[in]	idsSorted	should be true if the faceIds or faceIds/triIds arrays are properly sorted into ascending order. For face-triangle pairs, the arrays must be sorted by ascending face ids, then by ascending triangle ids within each face. The routine sortIntersectionFaceTriIds() can be used to perform this task. It is not important to sort ids unless an acceleration structure is being used. When using an acceleration structure in conjunction with a limited set of faces or face-triangles, it is ESSENTIAL to sort the indices, otherwise performance will be severely degraded.
[in]	space	specifies the space in which raySource and rayDirection are specified, as well as the space in which the hit point will be returned.
[in]	maxParam	specifies the maximum radius within which hits will be considered. This radius is specified as a multiple of the length of the rayDirection vector, so any hits beyond raySource+maxParam*rayDirection will not be considered. This value must be positive.
[in]	testBothDirections	specifies that hits in the negative rayDirection should also be considered. The maxParam value still applies to limit the search radius, which means that if testBothDirections is true, then only hits that lie between raySource-maxParam*rayDirection and raySource+maxParam*rayDirection will be considered.
[in,out]	accelParams	optional acceleration parameters.
[out]	hitPoint	receives the 3d coordinates of the closest intersection, in the space specified by the space parameter.
[out]	hitRayParam	if non-NULL, points to a value that will be filled in with the parametric distance along the ray to the hit point, if one was found. That is, hitPoint = raySource+(*hitRayParam)*rayDirection. If no hit was found, the referenced value will not be modified.
[out]	hitFace	if non-NULL, points to a value that will be filled in with the face id of the hit point, if one was found. If no hit was found, the referenced value will not be modified.
[out]	hitTriangle	if non-NULL, points to a value that will be filled in with the 0-based index of the triangle that was hit within the face given by *hitFace. If no hit was found, the referenced value will not be modified,
[out]	hitBary1	if non-NULL, points to a value that will be filled in with the first barycentric coordinate of the hit point within the triangle defined by hitFace and *hitTriangle. If v1, v2, and v3 are the vertices of that triangle, then the barycentric coordinates are such that hitPoint = (*hitBary1)*v1 + (*hitBary2)*v2 + (1-*hitBary1-*hitBary2)*v3; If no hit was found, the referenced value will not be modified,
[out]	hitBary2	if non-NULL, points to a value that will be filled in with the second barycentric coordinate of the hit point within the triangle defined by hitFace and *hitTriangle. If no hit was found, the referenced value will not be modified,
[in]	tolerance	numerical tolerance for the intersection operation. For numerical reasons, it is wise to allow the intersection routine to consider hits that lie a tiny bit outside mesh triangles. This parameter defines how close a ray has to be to hitting a triangle in order for a hit to register. Obviously, hits within the triangle are always considered, but we also consider hits that are up to a distance of tol*edgeLength away from the triangle, where "edgeLength" is the length of the edge of the triangle that is closest to the ray. This tolerance value is also used to collapse multiple nearly-identical hits that may arise due to numerical imprecision when a ray passes extremely close to a mesh vertex. Any two hits that are less than tol multiplied by the length of rayDirection apart will be considered the same hit, and treated interchangeably.
[out]	ReturnStatus	Status code

Returns

• true The given ray intersects the mesh, and the closest intersection of the ray with the mesh is given by the value returned in hitPoint.
• false The given ray does not intersect this mesh

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter There was an error with the parameters passed to the method. Either MSpace::kWorld was specified for a mesh with no world-space transformation, or the mesh had no data, or triIds was non-NULL without a corresponding faceIds array.
• MS::kFailure An object error has occurred.

bool anyIntersection	(	const MFloatPoint &	raySource,
		const MFloatVector &	rayDirection,
		const MIntArray *	faceIds,
		const MIntArray *	triIds,
		bool	idsSorted,
		MSpace::Space	space,
		float	maxParam,
		bool	testBothDirections,
		MMeshIsectAccelParams *	accelParams,
		MFloatPoint &	hitPoint,
		float *	hitRayParam,
		int *	hitFace,
		int *	hitTriangle,
		float *	hitBary1,
		float *	hitBary2,
		float	tolerance = 1e-6,
		MStatus *	ReturnStatus = NULL
	)

Finds any intersection of a ray starting at raySource and travelling in rayDirection with the mesh.

If faceIds is non-NULL and triIds is NULL, then only the faces specified by faceIds will be considered for intersection. If both faceIds and triIds are non-NULL, then each pair of entries will be taken as a (face,triangle) pair to be considered for intersection, where triangles are numbered on each face starting from 0. Thus, the face-triangle pair (10,0) means the first triangle on face 10. If both faceIds and triIds are NULL, then all face-triangles in the mesh will be considered.

The maxParam and testBothDirections flags can be used to control the radius of the search around the raySource point.

If accelParams is NULL, the search proceeds by testing all applicable face-triangles looking for intersections. If an MMeshIsectAccelParams structure is passed in via this parameter, the mesh builds an intersection acceleration structure based on the description provided by the parameter object. This acceleration structure is used to speed up the intersection operation, sometimes by a factor of several hundred over the non-accelerated case. Once created, the acceleration structure is cached, and will be reused the next time this method (or closestIntersection() or allIntersections()) is called with an identically-configured MMeshIsectAccelParams object. If a different MMeshIsectAccelParams object is used, then the acceleration structure will be deleted and re-created according to the new settings. Once created, the acceleration structure will persist until either the object is destroyed (or rebuilt by a construction history operation), or if the freeCachedIntersectionAccelerator() method is called. The cachedIntersectionAcceleratorInfo() and globalIntersectionAcceleratorsInfo() methods provide useful information about the resource usage of individual acceleration structures, and of all such structures in the system.

If the ray hits the mesh, the details of the found intersection point to the raySource will be returned via the hitPoint, hitRayParam, hitFace, hitTriangle, hitBary1, and hitBary2 parameters. These parameters completely describe where the hit occurred.

Parameters

[in]	raySource	Starting point for the ray
[in]	rayDirection	Direction of the ray
[in]	faceIds	(see above) if non-NULL, describes a subset of faces to consider for intersection.
[in]	triIds	(see above) if non-NULL, then along with faceIds describes a set of face-triangles to consider for intersection. If triIds is non-NULL, then faceIds must be non-NULL as well, otherwise an error will be generated.
[in]	idsSorted	should be true if the faceIds or faceIds/triIds arrays are properly sorted into ascending order. For face-triangle pairs, the arrays must be sorted by ascending face ids, then by ascending triangle ids within each face. The routine sortIntersectionFaceTriIds() can be used to perform this task. It is not important to sort ids unless an acceleration structure is being used. When using an acceleration structure in conjunction with a limited set of faces or face-triangles, it is ESSENTIAL to sort the indices, otherwise performance will be severely degraded.
[in]	space	specifies the space in which raySource and rayDirection are specified, as well as the space in which the hit point will be returned.
[in]	maxParam	specifies the maximum radius within which hits will be considered. This radius is specified as a multiple of the length of the rayDirection vector, so any hits beyond raySource+maxParam*rayDirection will not be considered. This value must be positive.
[in]	testBothDirections	specifies that hits in the negative rayDirection should also be considered. The maxParam value still applies to limit the search radius, which means that if testBothDirections is true, then only hits that lie between raySource-maxParam*rayDirection and raySource+maxParam*rayDirection will be considered.
[in,out]	accelParams	optional acceleration parameters.
[out]	hitPoint	receives the 3d coordinates of the intersection, in the space specified by the space parameter.
[out]	hitRayParam	if non-NULL, points to a value that will be filled in with the parametric distance along the ray to the hit point, if one was found. That is, hitPoint = raySource+(*hitRayParam)*rayDirection. If no hit was found, the referenced value will not be modified.
[out]	hitFace	if non-NULL, points to a value that will be filled in with the face id of the hit point, if one was found. If no hit was found, the referenced value will not be modified.
[out]	hitTriangle	if non-NULL, points to a value that will be filled in with the 0-based index of the triangle that was hit within the face given by *hitFace. If no hit was found, the referenced value will not be modified,
[out]	hitBary1	if non-NULL, points to a value that will be filled in with the first barycentric coordinate of the hit point within the triangle defined by hitFace and *hitTriangle. If v1, v2, and v3 are the vertices of that triangle, then the barycentric coordinates are such that hitPoint = (*hitBary1)*v1 + (*hitBary2)*v2 + (1-*hitBary1-*hitBary2)*v3; If no hit was found, the referenced value will not be modified,
[out]	hitBary2	if non-NULL, points to a value that will be filled in with the second barycentric coordinate of the hit point within the triangle defined by hitFace and *hitTriangle. If no hit was found, the referenced value will not be modified,
[in]	tolerance	numerical tolerance for the intersection operation. For numerical reasons, it is wise to allow the intersection routine to consider hits that lie a tiny bit outside mesh triangles. This parameter defines how close a ray has to be to hitting a triangle in order for a hit to register. Obviously, hits within the triangle are always considered, but we also consider hits that are up to a distance of tol*edgeLength away from the triangle, where "edgeLength" is the length of the edge of the triangle that is closest to the ray. This tolerance value is also used to collapse multiple nearly-identical hits that may arise due to numerical imprecision when a ray passes extremely close to a mesh vertex. Any two hits that are less than tol multiplied by the length of rayDirection apart will be considered the same hit, and treated interchangeably.
[out]	ReturnStatus	Status code

Returns

• true The given ray intersects the mesh, and the found intersection of the ray with the mesh is given by the value returned in hitPoint.
• false The given ray does not intersect this mesh

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter There was an error with the parameters passed to the method. Either MSpace::kWorld was specified for a mesh with no world-space transformation, or the mesh had no data, or triIds was non-NULL without a corresponding faceIds array.
• MS::kFailure An object error has occurred.

Examples:

bool allIntersections	(	const MFloatPoint &	raySource,
		const MFloatVector &	rayDirection,
		const MIntArray *	faceIds,
		const MIntArray *	triIds,
		bool	idsSorted,
		MSpace::Space	space,
		float	maxParam,
		bool	testBothDirections,
		MMeshIsectAccelParams *	accelParams,
		bool	sortHits,
		MFloatPointArray &	hitPoints,
		MFloatArray *	hitRayParams,
		MIntArray *	hitFaces,
		MIntArray *	hitTriangles,
		MFloatArray *	hitBary1s,
		MFloatArray *	hitBary2s,
		float	tolerance = 1e-6,
		MStatus *	ReturnStatus = NULL
	)

Finds all intersections of a ray starting at raySource and travelling in rayDirection with the mesh.

If faceIds is non-NULL and triIds is NULL, then only the faces specified by faceIds will be considered for intersection. If both faceIds and triIds are non-NULL, then each pair of entries will be taken as a (face,triangle) pair to be considered for intersection, where triangles are numbered on each face starting from 0. Thus, the face-triangle pair (10,0) means the first triangle on face 10. If both faceIds and triIds are NULL, then all face-triangles in the mesh will be considered.

The maxParam and testBothDirections flags can be used to control the radius of the search around the raySource point.

If accelParams is NULL, the search proceeds by testing all applicable face-triangles looking for intersections. If an MMeshIsectAccelParams structure is passed in via this parameter, the mesh builds an intersection acceleration structure based on the description provided by the parameter object. This acceleration structure is used to speed up the intersection operation, sometimes by a factor of several hundred over the non-accelerated case. Once created, the acceleration structure is cached, and will be reused the next time this method (or anyIntersection() or allIntersections()) is called with an identically-configured MMeshIsectAccelParams object. If a different MMeshIsectAccelParams object is used, then the acceleration structure will be deleted and re-created according to the new settings. Once created, the acceleration structure will persist until either the object is destroyed (or rebuilt by a construction history operation), or if the freeCachedIntersectionAccelerator() method is called. The cachedIntersectionAcceleratorInfo() and globalIntersectionAcceleratorsInfo() methods provide useful information about the resource usage of individual acceleration structures, and of all such structures in the system.

If the ray hits the mesh, the details of the intersection points will be returned via the hitPoint, hitRayParam, hitFace, hitTriangle, hitBary1, and hitBary2 parameters. These parameters completely describe where the hit occurred.

Parameters

[in]	raySource	Starting point for the ray
[in]	rayDirection	Direction of the ray
[in]	faceIds	(see above) if non-NULL, describes a subset of faces to consider for intersection.
[in]	triIds	(see above) if non-NULL, then along with faceIds describes a set of face-triangles to consider for intersection. If triIds is non-NULL, then faceIds must be non-NULL as well, otherwise an error will be generated.
[in]	idsSorted	should be true if the faceIds or faceIds/triIds arrays are properly sorted into ascending order. For face-triangle pairs, the arrays must be sorted by ascending face ids, then by ascending triangle ids within each face. The routine sortIntersectionFaceTriIds() can be used to perform this task. It is not important to sort ids unless an acceleration structure is being used. When using an acceleration structure in conjunction with a limited set of faces or face-triangles, it is ESSENTIAL to sort the indices, otherwise performance will be severely degraded.
[in]	space	specifies the space in which raySource and rayDirection are specified, as well as the space in which the hit point will be returned.
[in]	maxParam	specifies the maximum radius within which hits will be considered. This radius is specified as a multiple of the length of the rayDirection vector, so any hits beyond raySource+maxParam*rayDirection will not be considered. This value must be positive.
[in]	testBothDirections	specifies that hits in the negative rayDirection should also be considered. The maxParam value still applies to limit the search radius, which means that if testBothDirections is true, then only hits that lie between raySource-maxParam*rayDirection and raySource+maxParam*rayDirection will be considered.
[in,out]	accelParams	optional acceleration parameters.
[in]	sortHits	if true, then hits will be sorted in ascending ray-parametric order, so hits behind the raySource will be first (if testBothDirections is true), moving proceeding closer to the raySource, followed by hits in front of the raySource, proceeding by increasing distance from the raySource. If false, hits will be presented in no particular order in the return arrays.
[out]	hitPoints	an array that receives the 3d coordinates of the intersections, in the space specified by the space parameter.
[out]	hitRayParams	if non-NULL, points to an array that will be filled in with the parametric distances along the ray to the hit points, if any were found. That is, for the i'th hit, hitPoints[i] = raySource+(*hitRayParams[i])*rayDirection. If no hit was found, the referenced values will not be modified.
[out]	hitFaces	if non-NULL, points to an array that will be filled in with the face ids of the hit points, if any were found. If no hits were found, the referenced values will not be modified.
[out]	hitTriangles	if non-NULL, points to an array that will be filled in with the 0-based indices of the triangles that were hit within the faces given by *hitFaces. If no hits were found, the referenced values will not be modified,
[out]	hitBary1s	if non-NULL, points to an array that will be filled in with the first barycentric coordinates of the hit points within the triangles defined by hitFaces and *hitTriangles. For the i'th hit, If v1, v2, and v3 are the vertices of that triangle, then the barycentric coordinates are such that hitPoint[i] = (*hitBary1s)[i]*v1 + (*hitBary2s)[i]*v2 + (1-(*hitBary1s)[i]-(*hitBary2s)[i])*v3; If no hits were found, the referenced value will not be modified,
[out]	hitBary2s	if non-NULL, points to an array that will be filled in with the second barycentric coordinates of the hit points within the triangles defined by hitFaces and *hitTriangles. If no hits were found, the referenced values will not be modified,
[in]	tolerance	numerical tolerance for the intersection operation. For numerical reasons, it is wise to allow the intersection routine to consider hits that lie a tiny bit outside mesh triangles. This parameter defines how close a ray has to be to hitting a triangle in order for a hit to register. Obviously, hits within the triangle are always considered, but we also consider hits that are up to a distance of tol*edgeLength away from the triangle, where "edgeLength" is the length of the edge of the triangle that is closest to the ray. This tolerance value is also used to collapse multiple nearly-identical hits that may arise due to numerical imprecision when a ray passes extremely close to a mesh vertex. Any two hits that are less than tol multiplied by the length of rayDirection apart will be considered the same hit, and treated interchangeably.
[out]	ReturnStatus	Status code

Returns

• true The given ray intersects the mesh, and the intersections of the ray with the mesh are given by the values returned in hitPoints.
• false The given ray does not intersect this mesh

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter There was an error with the parameters passed to the method. Either MSpace::kWorld was specified for a mesh with no world-space transformation, or the mesh had no data, or triIds was non-NULL without a corresponding faceIds array.
• MS::kFailure An object error has occurred.

Examples:

MStatus sortIntersectionFaceTriIds	(	MIntArray *	faceIds,
		MIntArray *	triIds
	)

Convenience routine for sorting faceIds or face/triangle ids before passing them into the closestIntersection(), allIntersections(), or anyIntersection() methods.

When using an acceleration structure with the intersection operation, it is essential that any faceId or faceId/triId arrays be sorted properly to ensure optimal performance.

Parameters

[in,out]	faceIds	Face IDs to be sorted.
[in,out]	triIds	Triangle IDs to be sorted.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter 'faceIds' was NULL.
• MS::kFailure An object error has occurred.

MStatus freeCachedIntersectionAccelerator

(

)

If the mesh has a cached accelerator structure, then this routine forces it to be deleted.

Ordinarily, these structures are cached so that series of calls to the geometric query methods that make use of it can reuse the same structure. Once the client is finished with a series of method calls, however, they are responsible for freeing the acceleration structure, which is what this method does.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MString cachedIntersectionAcceleratorInfo

(

MStatus *

ReturnStatus = NULL

)

Retrieves a string that describes the intersection acceleration structure for this object, if any.

The string is formatted similar to:

10x10x10 uniform grid, (build time 0.5s), (memory footprint 2000KB)

It describes the configuration of the cached intersection accelerator, as well as how long it took to build it, and how much memory it is currently occupying. If the mesh has no cached intersection accelerator, the empty string is returned.

Parameters

[out]

ReturnStatus

Status code.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Returns

The description string

MString globalIntersectionAcceleratorsInfo ( )

static

Retrieves a string that describes the systemwide resource usage for cached mesh intersection accelerators.

The string will be formatted similar to:

total 10 accelerators created (2 currently active - total current memory = 10000KB), total build time = 10.2s, peak memory = 14567.1KB

This means that:

• a total of 10 acceleration structures have been created as instructed by calls to geometric query methods (e.g. closest point or intersection) with non-NULL accelParams values. These structures are destroyed and re-created when queries with differing acceleration parameters are made for the same mesh, so it is useful to see this value, which is the total count of how many have been created. In this case, 8 of the 10 created have been destroyed, either automatically or via calls to the freeCachedIntersectionAccelerator() method
• the total memory footprint for the 2 accelerators currently in existence is 10,000KB
• the total build time for all 10 structures that have been created is 10.2 seconds
• the peak of total memory usage for all accelerators in the system was 14567.1KB

Calling clearGlobalIntersectionAcceleratorInfo() will clear the "total count", "total build time", and "peak memory" fields from this information. It will not cause information about currently existing accelerators to be lost.

Returns

The information string

void clearGlobalIntersectionAcceleratorInfo ( )

static

As described above, clears the "total count", "total build time", and "peak memory" fields from the information string returned by globalIntersectionAcceleratorsInfo().

It will not cause information about currently existing accelerators to be lost.

bool intersect	(	const MPoint &	raySource,
		const MVector &	rayDirection,
		MPointArray &	points,
		double	tolerance = kMFnMeshPointTolerance,
		MSpace::Space	space = MSpace::kObject,
		MIntArray *	polygonIds = NULL,
		MStatus *	ReturnStatus = NULL
	)		const

Determines whether the given ray intersects this polygon and if so, returns the points of intersection.

The points of intersection will be in order of closest point to the raySource.

If the polygonIds array is not NULL then it will contain the polygon id's that correspond to the points of intersection.

The tolerance parameter is the epsilon value that will be used in the point-in-polygon calculation.

This method is not threadsafe when invoked by multiple threads on the same object at the same time. It is threadsafe as long as each thread operates on a different mesh object.

Parameters

[in]	raySource	Starting point for the ray
[in]	rayDirection	Direction of the ray
[out]	points	Storage for any points of intersection
[in]	tolerance	Tolerance used in intersection calculation
[in]	space	specifies the coordinate system for this operation
[out]	polygonIds	Storage for the polygon id's that correspond to the points of intersection.
[out]	ReturnStatus	Status code

Returns

• true The given ray intersects this polygon
• false The given ray does not intersect this polygon

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space transform.
• MS::kFailure An object error has occurred.

MStatus getClosestPointAndNormal	(	const MPoint &	toThisPoint,
		MPoint &	theClosestPoint,
		MVector &	theNormal,
		MSpace::Space	space = MSpace::kObject,
		int *	closestPolygon = NULL,
		MMeshIsectAccelParams *	accelParams = NULL
	)		const

Returns the closest point on this surface to the given point.

This method also returns the surface normal at that point.

If world space is specified then the returned point and normal will be in world space. In this case The test point (toThisPoint) is assumed to be in world space.

This method is not threadsafe. For a threadsafe closest point implementation, use the MMeshIntersector class.

Parameters

[in]	toThisPoint	Point to be compared
[out]	theClosestPoint	Storage for the closest point
[out]	theNormal	Storage for normal at the closest point
[in]	space	Specifies the coordinate system for this operation
[out]	closestPolygon	Storage for the closest polygon id
[in]	accelParams	optional acceleration parameters

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getClosestPoint	(	const MPoint &	toThisPoint,
		MPoint &	theClosestPoint,
		MSpace::Space	space = MSpace::kObject,
		int *	closestPolygon = NULL,
		MMeshIsectAccelParams *	accelParams = NULL
	)		const

Returns the closest point on this surface to the given point.

If world space is specified then the returned point will be in world space. In this case The test point (toThisPoint) is assumed to be in world space.

This method is not threadsafe. For a threadsafe closest point implementation, use the MMeshIntersector class.

Parameters

[in]	toThisPoint	Point to be compared
[out]	theClosestPoint	Storage for the closest point
[in]	space	Specifies the coordinate system for this operation
[out]	closestPolygon	Storage for the closest polygon id
[in]	accelParams	optional acceleration parameters

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getClosestNormal	(	const MPoint &	toThisPoint,
		MVector &	theNormal,
		MSpace::Space	space = MSpace::kObject,
		int *	closestPolygon = NULL,
		MMeshIsectAccelParams *	accelParams = NULL
	)		const

Returns the closest point on this surface to the given point.

This method also returns the surface normal at that point.

If world space is specified then the returned normal will be in world space. In this case The test point (toThisPoint) is assumed to be in world space.

Parameters

[in]	toThisPoint	Point to be compared
[out]	theNormal	Storage for normal at the closest point
[in]	space	Specifies the coordinate system for this operation
[out]	closestPolygon	Storage for the closest polygon id
[in]	accelParams	optional acceleration parameters

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

Examples:

MStatus getClosestUVs	(	const float2 &	toThisUVPoint,
		MIntArray &	uvIds,
		const MString *	uvSet = NULL
	)		const

Returns the IDs of the UVs on this surface which are nearest in uv space to the given uv set and coordinate.

All these UVs locate at the same distance to the given coordinate.

Parameters

[in]	toThisUVPoint	UV coordinate to be compared
[out]	uvIds	The list of the closest uvs ids
[in]	uvSet	UV set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid UV set.
• MS::kFailure An object error has occurred.

MStatus getConnectedShaders	(	unsigned int	instanceNumber,
		MObjectArray &	shaders,
		MIntArray &	indices
	)		const

Returns all the shaders (sets) connected to the specified instance of this mesh, as well as an array of polygon/shader assignments.

The indices array will hold, for each polygon in the mesh, an index into the shaders array. If a polygon does not have a shader assigned to it, the value of the index will be -1.

The shader objects can be derived from the sets returned.

Note: This method will only work with a MFnMesh function set which has been initialized with an MFn::kMesh.

See also getConnectedSetsAndMembers.

Parameters

[in]	instanceNumber	The instance number of the mesh to query
[out]	shaders	Storage for set objects (shader objects)
[out]	indices	Storage for indices matching faces to shaders. For each face, this array contains the index into the shaders array for the shader assigned to the face.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MObject copy	(	const MObject &	source,
		MObject	parentOrOwner = MObject::kNullObj,
		MStatus *	ReturnStatus = NULL
	)

This method creates a copy of a given source mesh.

After the copy this function set will operate on the new mesh.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

Parameters

[in]	source	the mesh to be copied
[in]	parentOrOwner	the DAG parent or kMeshData the new mesh will belong to
[out]	ReturnStatus	Status code

Returns

• If parentOrOwner is NULL then the transform for this surface is returned
• If parentOrOwner is a DAG object then the new surface shape is returned
• The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

• MS::kSuccess The method was successful.
• MS::kLicenseFailure Application not licensed for attempted operation
• MS::kInvalidParameter parentOrOwner was not valid; source object is not one of kMeshGeom, kMeshData, kMesh; dataMesh or underlying geometry was null; or there was no model present to add the object to
• MS::kFailure An object error has occurred.
• MS::kInsufficientMemory Insufficient memory to complete this method

Examples:

MStatus updateSurface

(

)

Signal that this polygonal mesh has changed and needs to redraw itself.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus syncObject

(

)

If a non-api operation happens that many have changed the underlying Maya object wrapped by this api object, make sure that the api object references a valid maya object.

In particular this call should be used if you are calling mel commands from your plugin. Note that this only applies for mesh shapes: in a plugin node where the dataMesh is being accessed directly this is not necessary.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

const float * getRawPoints

(

MStatus *

ReturnStatus

)

const

This method returns a pointer to the internal vertex list for this mesh.

The points are in local space.

The points are stored in a single contiguous array of floats, first by coordinate, then by element (xyzxyz...) There are three coordinate values, so each vertex is stored in 12 bytes of data, and the total array length is 12*numVertices() bytes.

This method is useful where performance is critical or memory resources are limited, as it avoids having to make a copy of the points as is done by getVertices. Care must be taken however as the returned pointer may become invalid if any changes are made to the mesh.

Returns

Pointer to internal vertex list data structure

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

const double * getRawDoublePoints

(

MStatus *

ReturnStatus

)

const

This method returns a pointer to the internal vertex list for this mesh.

The points are in local space.

The points are stored in a single contiguous array of doubles, first by coordinate, then by element (xyzxyz...) There are three coordinate values, so each vertex is stored in 24 bytes of data, and the total array length is 24*numVertices() bytes.

This method is useful where performance is critical or memory resources are limited, as it avoids having to make a copy of the points as is done by getVertices. Care must be taken however as the returned pointer may become invalid if any changes are made to the mesh.

Returns

Pointer to internal vertex list data structure

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

const float * getRawNormals

(

MStatus *

ReturnStatus

)

const

This method returns a pointer to the internal normal list for this mesh.

The normals are in local space and are the per-polygon per-vertex normals. To find the normal for a particular vertex-face, use getFaceNormalIds() or MItMeshPolygon::normalIndex to get the index into the array.

The normals are stored in a single contiguous array of floats, first by coordinate, then by element (xyzxyz...) There are three coordinate values, so each normal is stored in 12 bytes of data, and the total array length is 12*numNormals() bytes.

This method is useful where performance is critical or memory resources are limited, as it avoids having to make a copy of the normals as is done by getNormals. Care must be taken however as the returned pointer may become invalid if any changes are made to the mesh.

This method is not threadsafe.

Returns

Pointer to internal per-polygon per-vertex normal data structure

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getPoints	(	MFloatPointArray &	vertexArray,
		MSpace::Space	space = MSpace::kObject
	)		const

This method copies the vertex list for this mesh into the given point array.

Parameters

[out]	vertexArray	Storage for the vertex list
[in]	space	Specifies the coordinate system for this operation

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

Examples:

MStatus getPoints	(	MPointArray &	vertexArray,
		MSpace::Space	space = MSpace::kObject
	)		const

This method copies the vertex list for this mesh into the given point array.

Parameters

[out]	vertexArray	Storage for the vertex list
[in]	space	Specifies the coordinate system for this operation

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus setPoints	(	MFloatPointArray &	vertexArray,
		MSpace::Space	space = MSpace::kObject
	)

This method copies the points in the given point array to the vertices of this polygon.

To keep this method as fast as possible, no checking of the data is performed beyond ensuring that the total number of points passed in is correct. It is up to the caller to ensure that the points provide a valid mesh, for example by ensuring that there are no degenerate faces or non-manifold geometry.

Parameters

[out]	vertexArray	Storage for the vertex list
[in]	space	Specifies the coordinate system for this operation

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

Examples:

MStatus setPoints	(	MPointArray &	vertexArray,
		MSpace::Space	space = MSpace::kObject
	)

This method copies the points in the given point array to the vertices of this mesh.

To keep this method as fast as possible, no checking of the data is performed beyond ensuring that the total number of points passed in is correct. It is up to the caller to ensure that the points provide a valid mesh, for example by ensuring that there are no degenerate faces or non-manifold geometry.

Parameters

[in]	vertexArray	Storage for the vertex list
[in]	space	Specifies the coordinate system for this operation

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getVertices	(	MIntArray &	vertexCount,
		MIntArray &	vertexList
	)		const

This method retrieves the object-relative (mesh-relative/global) vertex indices for all polygons.

The indices refer to the elements in the array returned by the 'getPoints' method.

Parameters

[out]	vertexCount	Vertex count per polygon
[out]	vertexList	Storage for the vertex list. NOTE: Global (mesh-relative/object-relative) vertex indices are returned.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getPolygonVertices	(	int	polygonId,
		MIntArray &	vertexList
	)		const

This method retrieves the object-relative (mesh-relative/global) vertex indices for the specified polygon.

The indices refer to the elements in the array returned by the 'getPoints' method.

Parameters

[in]	polygonId	The polygon to examine
[out]	vertexList	Storage for the vertex list. NOTE: Global (mesh-relative/object-relative) vertex indices are returned.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid polygon index.
• MS::kFailure An object error has occurred.

Examples:

MStatus getPolygonTriangleVertices	(	int	polygonId,
		int	triangleId,
		int	vertexList[3]
	)		const

This method retrieves the object-relative (mesh-relative/global) vertex indices for the specified triangle in the specified polygon.

The indices refer to the elements in the array returned by the 'getPoints' method.

This method is not threadsafe.

Parameters

[in]	polygonId	The polygon to examine
[in]	triangleId	The triangle within the polygon to examine (numbered from zero)
[out]	vertexList	Storage for the vertex list. NOTE: Global (mesh-relative/object-relative) vertex indices are returned.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid polygon or triangle index.
• MS::kFailure An object error has occurred.

MStatus setPoint	(	int	vertexId,
		const MPoint &	pos,
		MSpace::Space	space = MSpace::kObject
	)

Sets the position of specified vertex in the vertex list for this mesh.

Note that if you modify the position of a vertex for a shape, a tweak will be created. If you have a shape with no history, the first time that a tweak is created, the underlying pointers under the MFnMesh object may change. You will need to call syncObject() to make sure that the object is valid. Subsequent calls to setPoint() on the same object do not require a syncObject call.

Parameters

[in]	vertexId	The object-relative (mesh-relative/global) index of the vertex to be changed
[in]	pos	The new value for the vertex
[in]	space	Specifies the coordinate system for this operation

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Either the vertexId is invalid, or this mesh cannot do a world space operation.
• MS::kFailure An object error has occurred.

MStatus getPoint	(	int	vertexId,
		MPoint &	pos,
		MSpace::Space	space = MSpace::kObject
	)		const

Get the position of the specified vertex in this mesh's vertex list.

Parameters

[in]	vertexId	The object-relative (mesh-relative/global) index of the vertex to retrieve
[out]	pos	Storage for the vertex
[in]	space	Specifies the coordinate system for this operation

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Either the vertexId is invalid, or this mesh cannot do a world space operation.
• MS::kFailure An object error has occurred.

MStatus getNormals	(	MFloatVectorArray &	normals,
		MSpace::Space	space = MSpace::kObject
	)		const

This method copies the normal list for this mesh into the given array.

The normals are the per-polygon per-vertex normals. To find the normal for a particular vertex-face, use getFaceNormalIds() or MItMeshPolygon::normalIndex to get the index into the array.

This method is not threadsafe.

Parameters

[out]	normals	Storage for the per-polygon per-vertex normal list
[in]	space	Specifies the coordinate system for this operation

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus setNormals	(	MFloatVectorArray &	normals,
		MSpace::Space	space = MSpace::kObject
	)

Set the normal array (user normals)

Parameters

[in]	normals	The normal array to set
[in]	space	World space or Object space

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getFaceVertexNormal	(	int	faceIndex,
		int	vertexIndex,
		MVector &	normal,
		MSpace::Space	space = MSpace::kObject
	)		const

Return a per-vertex-per-face normal for a given face (polygon) and given vertex.

This method is not threadsafe.

Parameters

[in]	faceIndex	Index of the face of interest
[in]	vertexIndex	The object-relative (mesh-relative/global) vertex index
[out]	normal	Storage for the per-polygon-per-vertex normal
[in]	space	Specifies the coordinate system for this operation

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getFaceVertexNormals	(	int	faceIndex,
		MFloatVectorArray &	normals,
		MSpace::Space	space = MSpace::kObject
	)		const

Return all per-vertex-per-face normals for a given face.

This method is not threadsafe.

Parameters

[in]	faceIndex	Index of the face (polygon) for which to retrive the normals
[out]	normals	Storage for the face normals
[in]	space	Specifies the coordinate system for this operation

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getNormalIds	(	MIntArray &	normalCounts,
		MIntArray &	normals
	)		const

Return normal indices for all vertices for a all faces.

The normalIds can be used to index into an array returned by MFnMesh::getNormals();

This method is not threadsafe.

Parameters

[out]	normalCounts	Number of normals for each face
[out]	normals	Storage for the per-polygon normal ids

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getFaceNormalIds	(	int	faceIndex,
		MIntArray &	normals
	)		const

Return normal indices for all vertices for a given face.

The normalIds can be used to index into an array returned by MFnMesh::getNormals();

This method is not threadsafe.

Parameters

[in]	faceIndex	Index of face (polygon) of interest
[out]	normals	Storage for the per-polygon normal ids

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus setFaceVertexNormal	(	MVector &	normalIn,
		int	faceId,
		int	vertexId,
		MSpace::Space	space = MSpace::kObject,
		MDGModifier *	modifier = NULL
	)

Set Normal for this face/vertex pair.

Parameters

[in]	normalIn	The normal to set
[in]	faceId	The face to set it for
[in]	vertexId	The object-relative (mesh-relative/global) vertex index to set it for
[in]	space	World space or Object space
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid vertex id or cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus setVertexNormal	(	MVector &	normalIn,
		int	vertexId,
		MSpace::Space	space = MSpace::kObject,
		MDGModifier *	modifier = NULL
	)

Set Shared Normal for this vertex.

Parameters

[in]	normalIn	The normal to set
[in]	vertexId	The object-relative (mesh-relative/global) vertex index to set it for
[in]	space	World space or Object space
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid vertex id or cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus setFaceVertexNormals	(	MVectorArray &	normalsIn,
		MIntArray &	faceList,
		MIntArray &	vertexList,
		MSpace::Space	space = MSpace::kObject
	)

Set Normals for the given face/vertex pairs.

Note that if there is a vertex-face mismatch anywhere in the list, this method will return an error, and not set any of the normals.

Parameters

[in]	normalsIn	The normals to set
[in]	faceList	The faces to set them for
[in]	vertexList	The object-relative (mesh-relative/global) vertex indices to set them for
[in]	space	World space or Object space

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid face or vertex id, one of the arrays had a different length from the others, or cannot do world space operation.
• MS::kFailure An object error has occurred.

Examples:

MStatus setVertexNormals	(	MVectorArray &	normalsIn,
		MIntArray &	vertexList,
		MSpace::Space	space = MSpace::kObject
	)

Set Shared Normals for these vertices.

The length of the normalsIn array should be same as the length of the vertexList array.

Parameters

[in]	normalsIn	The normals to set
[in]	vertexList	The object-relative (mesh-relative/global) vertex indices to set them for
[in]	space	World space or Object space

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

Examples:

MStatus getVertexNormal	(	int	vertexId,
		MVector &	normal,
		MSpace::Space	space = MSpace::kObject
	)		const

This method is obsolete.

Deprecated:

Use getVertexNormal(int, bool, MVector&, MSpace::Space) instead.

Return the normal at the given vertex. The returned normal is a single per-vertex normal, so unshared normals at a vertex will be averaged. See the class description for more information on normals.

This method is not threadsafe.

Parameters

[in]	vertexId	The object-relative (mesh-relative/global) vertex index to get the normal for
[out]	normal	Storage for the per-vertex normal
[in]	space	Specifies the coordinate system for this operation

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

Examples:

MStatus getVertexNormal	(	int	vertexId,
		bool	angleWeighted,
		MVector &	normal,
		MSpace::Space	space = MSpace::kObject
	)		const

Return the normal at the given vertex.

The returned normal is a single per-vertex normal, so unshared normals at a vertex will be averaged. See the class description for more information on normals.

If angleWeighted is set to true, the normals are computed by an average of surrounding face normals weighted by the angle subtended by the face at the vertex. If angleWeighted is set to false, a simple average of surround face normals is returned.

The simple average evaluation is significantly faster than the angle-weighted average.

This method is not threadsafe.

Parameters

[in]	vertexId	The object-relative (mesh-relative/global) vertex index to get the normal for
[in]	angleWeighted	Defines algorithm used to compute normal
[out]	normal	Storage for the per-vertex normal
[in]	space	Specifies the coordinate system for this operation

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getVertexNormals	(	bool	angleWeighted,
		MFloatVectorArray &	normals,
		MSpace::Space	space = MSpace::kObject
	)		const

Return all vertex normals.

The returned normals are per-vertex normals, so unshared normals at a vertex will be averaged. See the class description for more information on normals.

If angleWeighted is set to true, the normals are computed by an average of surrounding face normals weighted by the angle subtended by the face at the vertex. If angleWeighted is set to false, a simple average of surround face normals is returned.

The simple average evaluation is significantly faster than the angle-weighted average.

This method is not threadsafe.

Parameters

[in]	angleWeighted	Defines algorithm used to compute normal
[out]	normals	Storage for the per-vertex normals
[in]	space	Specifies the coordinate system for this operation

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getPolygonNormal	(	int	polygonId,
		MVector &	normal,
		MSpace::Space	space = MSpace::kObject
	)		const

Return the normal at the given polygon.

The returned normal is a per-polygon normal. See the class description for more information on normals.

This method is not threadsafe.

Parameters

[in]	polygonId	The polygon (face) to get the normal for
[out]	normal	Storage for the per-polygon normal
[in]	space	Specifies the coordinate system for this operation

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

bool isNormalLocked	(	int	normalId,
		MStatus *	ReturnStatus = NULL
	)		const

Test if the normal for a face/vertex pairs is locked (user defined).

Parameters

[in]	normalId	Normal to test.
[out]	ReturnStatus	Status code.

Returns

true if the normal is locked. false if not locked.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus lockVertexNormals

(

MIntArray &

vertexList

)

Lock Shared Normals for these vertices.

Parameters

[in]

vertexList

The object-relative (global) verticex ides to lock normals for

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus lockFaceVertexNormals	(	MIntArray &	faceList,
		MIntArray &	vertexList
	)

Lock Normals for these face/vertex pairs.

Parameters

[in]	faceList	The faces to lock normal in
[in]	vertexList	The corresponding object-relative (global) vertex indices to lock them for

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus unlockVertexNormals

(

MIntArray &

vertexList

)

Unlock Shared Normals for these vertices.

Parameters

[in]

vertexList

The vertices to unlock normals for

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus unlockFaceVertexNormals	(	MIntArray &	faceList,
		MIntArray &	vertexList
	)

Unlock Normals for these face/vertex pairs.

Parameters

[in]	faceList	The faces to unlock normal in
[in]	vertexList	The corresponding object-relative (global) vertex indices to unlock them for

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

int getTangentId	(	int	faceIndex,
		int	vertexIndex,
		MStatus *	ReturnStatus = NULL
	)		const

Return the tangent index for a given face vertex.

Parameters

[in]	faceIndex	Index of the face of interest.
[in]	vertexIndex	The object-relative (mesh-relative/global) vertex index.
[out]	ReturnStatus	Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid face or vertex index.
• MS::kFailure An object error has occurred.

MStatus getTangents	(	MFloatVectorArray &	tangents,
		MSpace::Space	space = MSpace::kObject,
		const MString *	uvSet = NULL
	)		const

Return the tangent vectors for all face vertices.

The tangent is defined as the surface tangent of the polygon running in the U direction defined by the uv map.

This method is not threadsafe.

Parameters

[out]	tangents	Storage for the tangents.
[in]	space	Specifies the coordinate system for this operation.
[in]	uvSet	The uv map set to calculate the tangents against.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter UV set does not exist, or cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getFaceVertexTangent	(	int	faceIndex,
		int	vertexIndex,
		MVector &	tangent,
		MSpace::Space	space = MSpace::kObject,
		const MString *	uvSet = NULL
	)		const

Return the normalized tangent vector at a given face vertex.

This method is not threadsafe.

Parameters

[in]	faceIndex	Index of the face of interest.
[in]	vertexIndex	The object-relative (mesh-relative/global) vertex index.
[out]	tangent	Storage for the tangent.
[in]	space	Specifies the coordinate system for this operation.
[in]	uvSet	The uv map set to calculate the binormals aginst.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid face or vertex index, UV set does not exist, or cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getFaceVertexTangents	(	int	faceIndex,
		MFloatVectorArray &	tangents,
		MSpace::Space	space = MSpace::kObject,
		const MString *	uvSet = NULL
	)		const

Return all per-vertex-per-face tangents for a given face.

This method is not threadsafe.

Parameters

[in]	faceIndex	Index of the face (polygon) for which to retrive the tangents
[out]	tangents	Storage for the face tangents
[in]	space	Specifies the coordinate system for this operation
[in]	uvSet	The uv map set to calculate the tangents aginst.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid face index, UV set does not exist, or cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getBinormals	(	MFloatVectorArray &	binormals,
		MSpace::Space	space = MSpace::kObject,
		const MString *	uvSet = NULL
	)		const

Return the binormal vectors for all face vertices.

This method is not threadsafe.

Parameters

[out]	binormals	Storage for the binormals.
[in]	space	Specifies the coordinate system for this operation.
[in]	uvSet	The uv map set to calculate the binormals aginst.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getFaceVertexBinormal	(	int	faceIndex,
		int	vertexIndex,
		MVector &	binormal,
		MSpace::Space	space = MSpace::kObject,
		const MString *	uvSet = NULL
	)		const

Return the binormal vector at a given face vertex.

This method is not threadsafe.

Parameters

[in]	faceIndex	Index of the face of interest
[in]	vertexIndex	The object-relative (mesh-relative/global) vertex index
[out]	binormal	Storage for the binormal.
[in]	space	Specifies the coordinate system for this operation.
[in]	uvSet	The uv map set to calculate the binormals aginst.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Face or vertex index is invalid, UV set does not exist, or cannot do world space operation.
• MS::kFailure An object error has occurred.

MStatus getFaceVertexBinormals	(	int	faceIndex,
		MFloatVectorArray &	binormals,
		MSpace::Space	space = MSpace::kObject,
		const MString *	uvSet = NULL
	)		const

Return all per-vertex-per-face binormals for a given face.

This method is not threadsafe.

Parameters

[in]	faceIndex	Index of the face (polygon) for which to retrive the binormals
[out]	binormals	Storage for the face binormals
[in]	space	Specifies the coordinate system for this operation
[in]	uvSet	The uv map set to calculate the binormals aginst.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Face index is invalid, UV set does not exist, or cannot do world space operation.
• MS::kFailure An object error has occurred.

bool isRightHandedTangent	(	int	tangentId,
		const MString *	uvSetName = NULL,
		MStatus *	ReturnStatus = NULL
	)		const

Returns true if the normal, tangent and binormal form a right handed coordinate system.

By default, Maya uses a right-handed system. Mirrored geometry can introduce a left-handed system.

Parameters

[in]	tangentId	tangent index for a given face vertex
[in]	uvSetName	Name of uv set to use
[out]	ReturnStatus	Status code

Returns

• true normal, tangent, and binormal are right handed
• false normal, tangent, and binormal are left handed

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

bool isPolygonConvex	(	int	faceIndex,
		MStatus *	ReturnStatus = NULL
	)		const

This method determines if the specified polygon is convex.

Parameters

[in]	faceIndex	The polygon to be tested
[out]	ReturnStatus	Status code

Returns

• true The polygon is convex
• false The edge is concave

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getEdgeVertices	(	int	edgeId,
		int2 &	vertexList
	)		const

This method retrieves the object-relative (mesh-relative/global) vertex indices corresponding to the specified edge.

The indices can be used to refer to the elements in the array returned by the 'getPoints' method.

Parameters

[in]	edgeId	The edge to get the vertices for
[out]	vertexList	Storage for the 2 object-relative vertex indices

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

bool isEdgeSmooth	(	int	edgeId,
		MStatus *	ReturnStatus = NULL
	)		const

This method determines if the specified edge is smooth (soft).

Parameters

[in]	edgeId	The edge to be tested
[out]	ReturnStatus	Status code

Returns

• true The edge is smooth (soft)
• false The edge is hard

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus setEdgeSmoothing	(	int	edgeId,
		bool	smooth = true
	)

This method sets the specified edge to be hard or smooth (soft).

You must use the cleanupEdgeSmoothing method after all the desired edges on your mesh have had setEdgeSmoothing done. Use the updateSurface method to indicate the mesh needs to be redrawn.

Parameters

[in]	edgeId	The edge to set the smoothing information for
[in]	smooth	If true the edge will be smooth (soft), otherwise the edge will be hard.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus setEdgeSmoothings	(	const MIntArray &	edgeIds,
		const MIntArray &	smooths
	)

This method sets the specified edges to be hard or smooth (soft).

You must use the cleanupEdgeSmoothing method after all the desired edges on your mesh have had setEdgeSmoothing done. Use the updateSurface method to indicate the mesh needs to be redrawn.

Parameters

[in]	edgeIds	The edges to set the smoothing information for
[in]	smooths	If true the edges will be smooth (soft), otherwise the edges will be hard.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.
• MS::kInvalidParameter The length of edgeIds does not match smooths.

MStatus cleanupEdgeSmoothing

(

)

This method updates the mesh after setEdgeSmoothing has been done.

This should be called only once, after all the desired edges have been had their soothing set. If you don't call this method, the normals may not be correct, and the object will look odd in shaded mode.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getCreaseEdges	(	MUintArray &	edgeIds,
		MDoubleArray &	creaseData
	)		const

This method returns the crease edges of the mesh, and also the crease data associated with those edges.

Please note that to make effective use of the creasing variable in software outside of Maya may require a license under patents owned by Pixar(R).

Parameters

[out]	edgeIds	The list of crease edges ids.
[out]	creaseData	The data related to the crease edges.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus setCreaseEdges	(	const MUintArray &	edgeIds,
		const MDoubleArray &	creaseData
	)

This method sets the specified edges of the mesh as crease edges.

Please note that to make effective use of the creasing variable in software outside of Maya may require a license under patents owned by Pixar(R).

Parameters

[in]	edgeIds	The list of crease edges ids.
[in]	creaseData	The data related to the crease edges.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MUintArray getInvisibleFaces

(

MStatus *

ReturnStatus = NULL

)

const

This method returns the invisible faces of the mesh.

Invisible faces are like lightweight holes in that they are not rendered but do not require additional geometry the way that holes do. They have the advantage over holes that if the mesh is smoothed then their edges will be smoothed as well, while holes will retain their hard edges.

Invisible faces can be set using the setInvisibleFaces() method or the polyHole command.

Parameters

[out]

ReturnStatus

status code

Returns

The list of invisible face ids.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus setInvisibleFaces	(	const MUintArray &	faceIds,
		bool	makeVisible = false
	)

This method sets the specified faces of the mesh to be visible or invisible.

See the getInvisibleFaces() method for a description of invisible faces.

Parameters

[in]	faceIds	The list of face ids to be made visible/invisible.
[in]	makeVisible	If true the faces will be made visible. The default is false, which will make them invisible.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MStatus getCreaseVertices	(	MUintArray &	vertexIds,
		MDoubleArray &	creaseData
	)		const

This method returns the crease vertices of the mesh, and also the crease data associated with those vertices.

Please note that to make effective use of the creasing variable in software outside of Maya may require a license under patents owned by Pixar(R).

Parameters

[out]	vertexIds	The list of crease vertices ids.
[out]	creaseData	The data related to the crease vertices.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus setCreaseVertices	(	const MUintArray &	vertexIds,
		const MDoubleArray &	creaseData
	)

This method sets the specified vertices of the mesh as crease vertices.

Please note that to make effective use of the creasing variable in software outside of Maya may require a license under patents owned by Pixar(R).

Parameters

[in]	vertexIds	The list of crease vertices ids.
[in]	creaseData	The data related to the crease vertices.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

int numUVSets

(

MStatus *

ReturnStatus = NULL

)

const

Returns the number of uv sets for an object.

Parameters

[out]

ReturnStatus

return status value

Returns

The number of uv sets for the object

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MString createUVSetWithName	(	const MString &	uvSetName,
		MDGModifier *	modifier = NULL,
		MStatus *	ReturnStatus = NULL,
		const MUintArray *	instances = NULL
	)

Create a new empty uv set for this mesh.

If the name passed in is empty (zero length), or a uv set with the same name already exists, then a new unique name is generated and used as the new uvset's name.

In the case where the name is empty, the new name will be of the format "uvSet#" where # is a number that makes the name unique for this mesh.

In the case where a uvset already exists with the same name as the name passed in, then the new name will be of the format "userName#", where "userName" was the name specified, and # is a number appended on to "userName" to make the name unique for this mesh.

This operation will only work when the MFnMesh refers to a shape.

Parameters

[in]	uvSetName	The name of the uv set to add. If a new name needed to be generated then the new name will be returned by the function.
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[out]	ReturnStatus	Status code. See below.
[in]	instances	The instance number(s) for which the set should be added, or NULL if the uv-set should be shared by all instances.

Returns

The name used for the UV set. May be different then the given name if a new name needed to be generated.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MString copyUVSetWithName	(	const MString &	fromName,
		const MString &	toName,
		MDGModifier *	modifier = NULL,
		MStatus *	ReturnStatus = NULL
	)

Copies a uv set from one to another for this mesh.

The source must exist. The following cases can occur:

1) If the destination name is the same as the source than no copy will be made. 2) If the destination name exists a copy will be made to the destination. 3) If the destination name does not exist, then a new uv set will be created with a unique name, and then the copy will be made. The name generated will be "destinationName>#", where "destinationName" is the original name sent in, and "#" is a ascending number appended to the end of the original name.

This operation will only work when the MFnMesh refers to a shape.

Parameters

[in]	fromName	The name of the uv set to change
[in]	toName	The name to set the uv set to.
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[out]	ReturnStatus	Status Code. See below.

Returns

The name of the new UV set. May be different then the name passed in if a new name was generated.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus renameUVSet	(	const MString &	origName,
		const MString &	newName,
		MDGModifier *	modifier = NULL
	)

Renames a uv set from one name to another for this mesh.

The original name must exist, and the new name cannot be the same name as one that already exists. In these cases the uv set will not be renamed.

This operation will only work when the MFnMesh refers to a shape.

Parameters

[in]	origName	The name of the uv set to change
[in]	newName	The name to set the uv set to.
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus deleteUVSet	(	const MString &	setName,
		MDGModifier *	modifier = NULL,
		MSelectionList *	currentSelection = NULL
	)

Deletes a named uv set from the object.

If a uv set with the given name cannot be found, then no uv set will be deleted.

This operation only works when the MFnMesh refers to a shape.

Parameters

[in]	setName	Name of the uv set to delete
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	currentSelection	Since this method may change the selection list, if you wish to undo its effects, you need to keep track of the current active selection. If this selection list is non-null, then the active selection list will be returned in this argument.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus setCurrentUVSetName	(	const MString &	setName,
		MDGModifier *	modifier = NULL,
		MSelectionList *	currentSelection = NULL
	)

Set the "current" uv set for this object.

The "current" uv set is the uv set to use when no uv set name is specified for a uv set operation. If the uv set does not exist then the "current" uv set will not be changed.

This operation only works when the MFnMesh is a shape.

Parameters

[in]	setName	Name of uv set to make "current"
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	currentSelection	Since this method may change the selection list, if you wish to undo its effects, you need to keep track of the current active selection. If this selection list is non-null, then the active selection list will be returned in this argument.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MString currentUVSetName	(	MStatus *	ReturnStatus = NULL,
		int	instance = kMFnMeshInstanceUnspecified
	)		const

Get the name of the "current" uv set.

The "current" uv set is the uv set which is used for uv operations when no uv set is explicitly specified.

On instanced meshes, uv sets may be applied on a per-instance basis or may be shared across all instances. When the uv sets are per-instance, the concept of the current uv set has two levels of granularity. Namely, the current uv set applies to one or more instances, plus there are other uv sets in the same uv set family that apply to different instances. The instance arguement is used to indicate that if this is a per-instance uv set, you are interested in the name of the uv set that applies to the specified instance. When the index is not specified, the current uv set will be returned regardless of which instance it is for.

If there is no current uv set, then a empty string will be returned on the string argument passed in.

Parameters

[out]	ReturnStatus	Status code
[in]	instance	Instance of the mesh whose set we are interested in, or kMFnMeshInstanceUnspecified for the set which is shared across all instances.

Returns

UV set name.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MStatus getUVSetNames

(

MStringArray &

setNames

)

const

Get the names of all of the uv sets on this object.

Parameters

[out]

setNames

Array of uv set names found

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MStatus getUVSetFamilyNames

(

MStringArray &

familyNames

)

const

Get the names of all of the uv set families on this object.

A uv set family is a set of per-instance sets with the same name with each individual set applying to one or more instances. A set which is shared across all instances will be the sole member of its family.

Given a uv set family name, the method getUVSetsInFamily may be used to determine the names of the associated individual sets.

Parameters

[out]

familyNames

Array of uv set names found

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getUVSetsInFamily	(	const MString &	familyName,
		MStringArray &	setNames
	)		const

Get the names of the uv sets that belong to this set family.

Per-instance sets will have multiple sets in a family, with each individual set applying to one or more instances. A set which is shared across all instances will be the sole member of its family and will share the same name as its family.

Parameters

[in]	familyName	The uv set family name
[out]	setNames	Array of uv set names in the family

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

bool isUVSetPerInstance	(	const MString &	name,
		MStatus *	ReturnStatus = NULL
	)		const

Return true if this set is per-instance, and false if it is shared across all instances.

The name provided may be an individual set name or a set family name.

Parameters

[in]	name	The set name or set family name
[out]	ReturnStatus	Status code

Returns

true if the set is per-instance

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getFaceUVSetNames	(	int	polygonId,
		MStringArray &	setNames
	)		const

This method returns the list of UV sets mapped to a face.

This method is not threadsafe.

Parameters

[in]	polygonId	The polygon ID of the face of interest
[out]	setNames	The string array to return the UV sets names in

Returns

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred or an internal error.

MStatus getAssociatedUVSetTextures	(	const MString	uvSetName,
		MObjectArray &	textures
	)		const

Get a list of texture nodes which are using a given uv set.

If the texture has a 2d texture placement, the texture, and not the placement will be returned.

Parameters

[in]	uvSetName	Name of uv set to use
[out]	textures	Texture nodes using the uv set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getAssociatedUVSetInstances	(	const MString &	uvSetName,
		MIntArray &	instances
	)		const

Get a list of the instance numbers associated with this uv map.

If the uv map is shared across all instances, an empty array will be returned.

Note, this method may only be used on an MFnMesh that is initialized using a mesh shape. It will return failure if used on an MFnMesh that has no associated shape.

Parameters

[in]	uvSetName	Name of uv set to use
[out]	instances	Instances associated with this uv set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred or the name does not exist

MStatus setUVs	(	const MFloatArray &	uArray,
		const MFloatArray &	vArray,
		const MString *	uvSet = NULL
	)

Sets all of the texture coordinates (uv's) for this mesh.

The uv arrays must be of equal size and must be at least as large as the current UV set size. You can determine the UV set size by calling numUVs() for the default UV set, or numUVs(uvSet) for a named UV set.

If the arrays are larger than the UV set size, then the uv list for this mesh will be grown to accommodate the new uv values.

After using this method to set the UV values, you must call one of the assignUV methods to assign the corresponding UV ids to the geometry.

In order to shrink the uvs array, do the following:

• MFnMesh::clearUVs()
• MFnMesh::setUVs( ... )
• MFnMesh::assignUVs()

These steps will let you to create an array of uvs which is smaller than the original one.

Parameters

[in]	uArray	The array of u values to be set
[in]	vArray	The array of v values to be set
[in]	uvSet	UV set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter uArray and vArray lengths do not match or the arrays are smaller than the number of UVs in the set.
• MS::kFailure An object error has occurred.

Examples:

MStatus setSomeUVs	(	const MIntArray &	uvIds,
		const MFloatArray &	uArray,
		const MFloatArray &	vArray,
		const MString *	uvSet = NULL
	)

Sets the specified texture coordinates (UV's) for this mesh.

The uv arrays and uvId array must be of equal size. If the largest uvId in the array is larger than numUVs() then the uv list for this mesh will be grown to accommodate the new uv values. If a named uv set is given, the array will be grown when the largest uvId is larger than numUVs(uvSet).

If you have added new uvIds, you must call one of the assignUV methods to assign the uvIds to the geometry. If you are modifying existing UVs, you do not need to call one of the assignUV methods.

Parameters

[in]	uvIds	The array of uvIds to set values for
[in]	uArray	The array of u values to be set
[in]	vArray	The array of v values to be set
[in]	uvSet	UV set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter uArray and vArray lengths do not match or the arrays are smaller than numUVs().
• MS::kFailure An object error has occurred.

MStatus getUVs	(	MFloatArray &	uArray,
		MFloatArray &	vArray,
		const MString *	uvSet = NULL
	)		const

This method copies the texture coordinate list for this mesh into the given uv arrays.

Parameters

[out]	uArray	Storage for the u texture coordinate list
[out]	vArray	Storage for the v texture coordinate list
[in]	uvSet	UV set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MStatus setUV	(	int	uvId,
		float	u,
		float	v,
		const MString *	uvSet = NULL
	)

Sets the specified texture coordinate.

The uvId is the element in the uv list that will be set. If the uvId is greater than or equal to numUVs() then the uv list will be grown to accommodate the specified uv. If a named uv set is given, the largest uvId must be larger than numUVs(uvSet).

If the UV being added is new, then you must call one of the assignUV methods in order to update the geometry.

Parameters

[in]	uvId	The element in the uv list to be set
[in]	u	The new u value that is to be set
[in]	v	The new v value that is to be set
[in]	uvSet	UV set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MStatus getUV	(	int	uvId,
		float &	u,
		float &	v,
		const MString *	uvSet = NULL
	)		const

Get the value of the specified texture coordinate from this mesh's uv list.

The uvId is the element in the uv list that will be retrieved.

Parameters

[in]	uvId	The element in the uv list to examine
[out]	u	Storage for the u value
[out]	v	Storage for the v value
[in]	uvSet	UV set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid uvId. The uvId should be less than numUVs() or numUVs(uvSet).
• MS::kFailure An object error has occurred.

Examples:

MStatus getPointAtUV	(	int	polygonId,
		MPoint &	toThisPoint,
		float2 &	uvPoint,
		MSpace::Space	space = MSpace::kObject,
		const MString *	uvSet = NULL,
		float	tolerance = 0.0
	)

Return the position of the point at the given UV value in the current polygon.

This method is not threadsafe.

Parameters

[in]	polygonId	Search for uv on this face
[out]	toThisPoint	Space for the point
[in]	uvPoint	The UV value to try to locate
[in]	space	The coordinate system to return "toThisPoint" in
[in]	uvSet	UV set to work with
[in]	tolerance	tolerance value to compare float data type

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid polygon id or UV set, or cannot do worldSpace operation.
• MS::kFailure An object error has occurred.

MStatus getPointsAtUV	(	MIntArray &	polygonIds,
		MPointArray &	points,
		const float2 &	uvPoint,
		MSpace::Space	space = MSpace::kObject,
		const MString *	uvSet = NULL,
		float	tolerance = 0.0
	)		const

Return the positions of the points at the given UV value on the mesh.

Parameters

[out]	polygonIds	Storage for polygon ids to the return points.
[out]	points	Storage for the points on this surface to the given uv set and coordinate
[in]	uvPoint	UV coordinate to be compared
[in]	space	The coordinate system to return "points" in
[in]	uvSet	UV set to work with
[in]	tolerance	tolerance value to compare float data type

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid polygon id or UV set, or cannot do worldSpace operation.
• MS::kFailure An object error has occurred.

MStatus getUVAtPoint	(	MPoint &	pt,
		float2 &	uvPoint,
		MSpace::Space	space = MSpace::kObject,
		const MString *	uvSet = NULL,
		int *	closestPolygon = NULL
	)

Find the point closest to the given point, and return the UV value at that point.

This method is not threadsafe.

Parameters

[in]	pt	The point to try to get UV for
[out]	uvPoint	Space for the UV value
[in]	space	The coordinate system for this operation
[in]	uvSet	UV set to work with
[out]	closestPolygon	polygon id of the closest polygon

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid UV set, or cannot do worldSpace operation.
• MS::kFailure An object error has occurred.

MStatus getAxisAtPoint	(	MPoint &	pt,
		MVector &	normal,
		MVector &	uTangent,
		MVector &	vTangent,
		MSpace::Space	space = MSpace::kObject,
		const MString *	uvSet = NULL,
		int *	closestPolygon = NULL
	)

Find the point on the mesh which is closest to the given point, and return the axis at that point.

The axis or affine space is defined by non-normalized and non-orthogonized U tangent, V tangent and normal. It's useful to detect local surface deformation for meshes with similar UV mapping.

This method is not threadsafe.

Parameters

[in]	pt	The point to be queried
[out]	normal	Space for the normal
[out]	uTangent	Space for the U tangent
[out]	vTangent	Space for the V tangent
[in]	space	The coordinate system for this operation
[in]	uvSet	UV set to work with
[out]	closestPolygon	polygon id of the closest polygon

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid UV set, or cannot do worldSpace operation.
• MS::kFailure An object error has occurred.
• MS::kNotFound The given UV value is not found in face.

MStatus getPolygonUV	(	int	polygonId,
		int	vertexIndex,
		float &	u,
		float &	v,
		const MString *	uvSet = NULL
	)		const

Get the value of the specified texture coordinate for a vertex in a polygon.

Since texture coordinates (uv's) are stored per-polygon per-vertex you must specify both the polygon and the vertex that the u and v values are mapped to.

This method is not threadsafe.

Parameters

[in]	polygonId	The polygon (face) to examine
[in]	vertexIndex	The face-relative (local) vertex id to examine
[out]	u	Storage for the u value
[out]	v	Storage for the v value
[in]	uvSet	UV set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid polygonId or vertexIndex specified.
• MS::kFailure An object error has occurred.

MStatus getPolygonUVid	(	int	polygonId,
		int	vertexIndex,
		int &	uvId,
		const MString *	uvSet = NULL
	)		const

Get the id of the specified texture coordinate for a vertex in a polygon.

This method is not threadsafe.

Parameters

[in]	polygonId	The polygon (face) to examine
[in]	vertexIndex	The face-relative (local) vertex id to examine
[out]	uvId	Storage for the uv index
[in]	uvSet	UV set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid polygonId or vertexIndex specified.
• MS::kFailure An object error has occurred.

Examples:

MStatus assignUV	(	int	polygonId,
		int	vertexIndex,
		int	uvId,
		const MString *	uvSet = NULL
	)

Maps a texture coordinate to a specified vertex of a polygon.

Since texture coordinates (uv's) are stored per-polygon per-vertex you must specify both the polygon and the vertex that the uv entry is mapped to.

The vertexIndex (face-relative/local) is the vertex within the polygon that the uv will be mapped to. This index must be in the range 0 to polygonVertexCount(polygonId).

Parameters

[in]	polygonId	The polygon (face) to map to
[in]	vertexIndex	The face-relative (local) vertex id of the polygon to map to
[in]	uvId	The uv entry from the uv list that will be mapped
[in]	uvSet	UV set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid polygonId, vertexIndex, or uvId specified.
• MS::kFailure An object error has occurred.

Examples:

MStatus assignUVs	(	const MIntArray &	uvCounts,
		const MIntArray &	uvIds,
		const MString *	uvSet = NULL
	)

This method maps all texture coordinates for the mesh.

The setUV/setUVs method is used to create the texture coordinate table for the mesh. After the table is created, this method is used to map those values to each polygon on a per-vertex basis. The setUV/setUVs method should be called before the assignUVs method.

The uvCounts array should contain the number of uv's per polygon. Since uv's are mapped per-polygon per-vertex, the entries in this array should match the vertex counts for each polygon in the mesh. For example, the array for a cube would be { 4, 4, 4, 4, 4, 4 } since there are 6 polygons each with 4 vertices.

If an entry in this array is '0' then the corresponding polygon will not be mapped. The sum of all the entries in the uvCounts array must be equal to the size of the uvIds array or this method will fail.

The uvIds array should contain the UV indices that will be mapped to each polygon-vertex in the mesh. The entries in this array specify which uv's in the mesh's uv table are mapped to each polygon-vertex. Each entry in the uvIds array must be less than numUVs(), or numUVs(uvSet) for a named uvSet. The size of the uvIds array is equivalent to adding up all of the entries in the uvCounts array, so for a cube with all polygons mapped there would be 24 entries.

Parameters

[in]	uvCounts	The uv counts for each polygon (face) in the mesh
[in]	uvIds	The uv indices to be mapped to each polygon-vertex
[in]	uvSet	UV set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid uvCounts array or invalid uvIds array.
• MS::kFailure An object error has occurred.

Examples:

MStatus clearUVs

(

const MString *

uvSet = NULL

)

This method clears out all texture coordinates for the mesh, and leaves behind an empty UVset.

This method should be used if it is needed to shrink the actual size of the UV table. In this case, the user should call clearUVs, setUVs and then assignUVs to rebuild the mapping info.

When called on a dataMesh, the UVs are removed. When called on a shape with no history, the UVs are removed and the attributes are set on the shape. When called on a shape with history, the polyMapDel command is invoked and a polyMapDel node is created.

Parameters

[in]

uvSet

UV set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid uvCounts array or invalid uvIds array.
• MS::kInvalidIndex Invalid uvSet was specified
• MS::kFailure An object error has occurred.

Examples:

MStatus getAssignedUVs	(	MIntArray &	uvCounts,
		MIntArray &	uvIds,
		const MString *	uvSet = NULL
	)		const

Get assigned UVs.

This method finds all texture coordinates for the mesh that have been mapped, and returns them in the same format as the assignUVs.

The uvCounts array that is returned will contain the number of uv's per polygon. Since uv's are mapped per-polygon per-vertex, the entries in this array will match the vertex counts for each polygon in the mesh. For example, the array for a cube would be { 4, 4, 4, 4, 4, 4 } since there are 6 polygons each with 4 vertices.

The uvIds array will contain the UV indices that are mapped to each polygon-vertex in the mesh. The entries in this array indicate which uv's in the mesh's uv table are mapped to each polygon-vertex. Each entry in the uvIds array will be less than numUVs(), or numUVs(uvSet) for a named uvSet. The size of the uvIds array is equivalent to adding up all of the entries in the uvCounts array, so for a cube with all polygons mapped there will be 24 entries.

This method is not threadsafe.

Parameters

[out]	uvCounts	The container for the uv counts for each polygon in the mesh
[out]	uvIds	The container for the uv indices mapped to each polygon-vertex
[in]	uvSet	UV set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid uvCounts array or invalid uvIds array.
• MS::kFailure An object error has occurred.

MStatus getUvShellsIds	(	MIntArray &	uvShellIds,
		unsigned int &	nbUvShells,
		const MString *	uvSet = NULL
	)		const

Constructs an array of unique integer for each UV shell.

This method let the user identify each connected piece of UV.

The uvShellIds array that is returned will contain a UV shell number for each UV in the given UV set. This number uniquely identifies a connected piece in the UV set. Numbers are positive, starting at 0.

For example, the array { 0, 0, 0, 1, 1, 1, 1, 0} would represent an object where UVs 0, 1, 2 and 7 are connected together (UV shell number 0), and UVs 3 to 6 belong to shell number 1.

Parameters

[out]	uvShellIds	The container for the uv shell Ids
[out]	nbUvShells	The number of UV shells in this UV set.
[in]	uvSet	UV set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getPinUVs	(	MUintArray &	uvIds,
		MDoubleArray &	pinData,
		const MString *	uvSet = NULL
	)		const

This method returns the pin uvs of the mesh, and also the pin data associated with those uvs.

Parameters

[out]	uvIds	The list of pin uvs ids.
[out]	pinData	The list of pin weights.
[in]	uvSet	UV set to work with.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus setPinUVs	(	const MUintArray &	uvIds,
		const MDoubleArray &	pinData,
		const MString *	uvSet = NULL
	)

This method sets the specified uvs of the mesh as "pinned" uvs, a "pinned" uv is one which should not be modified.

If pin weight is set to 1.0 then it becomes fully pinned and uv tools should not modify that uv. If the pin weight is set to a value between 0.0 and 1.0 then uv tools should weight their changes to that uv accordingly.

Parameters

[in]	uvIds	The list of pin uvs ids.
[in]	pinData	The list of pin weights.
[in]	uvSet	UV set to work with.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

bool isPolygonUVReversed	(	int	polygonId,
		const MString *	uvSet = NULL,
		MStatus *	ReturnStatus = NULL
	)		const

This method determines if the winding order of texture coordinates (uv's) for specified polygon are reversed (clockwise)

Parameters

[in]	polygonId	The polygon to be tested
[in]	uvSet	UV set to work with
[out]	ReturnStatus	Status code

Returns

• true The texture coordinates (uv's) are reversed (clockwise)
• false The texture coordinates (uv's) are not reversed (counter clockwise)

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

int numColorSets

(

MStatus *

ReturnStatus = NULL

)

const

Returns the number of color sets for an object.

Parameters

[out]

ReturnStatus

return status value

Returns

The number of color sets for the object

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MString createColorSetWithName	(	const MString &	colorSetName,
		MDGModifier *	modifier = NULL,
		const MUintArray *	instances = NULL,
		MStatus *	ReturnStatus = NULL
	)

Create a new empty color set for this mesh.

If the name passed in is empty (zero length), or a color set with the same name already exists, then a new unique name is generated and used as the new color set's name.

In the case where the name is empty, the new name will be of the format "colorSet#" where # is a number that makes the name unique for this mesh.

In the case where a color set already exists with the same name as the name passed in, then the new name will be of the format "userName#", where "userName" was the name specified, and # is a number appended on to "userName" to make the name unique for this mesh.

This operation will only work when the MFnMesh refers to a shape.

Parameters

[in]	colorSetName	The name of the color set to add.
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	instances	The instance number(s) for which the set should be added, or NULL if the uv-set should be shared by all instances.
[in]	ReturnStatus	Status code. See below.

Returns

The resulting name of the color set.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MStatus deleteColorSet	(	const MString &	colorSetName,
		MDGModifier *	modifier = NULL,
		MSelectionList *	currentSelection = NULL
	)

Deletes a named color set from the object.

If a color set with the given name cannot be found, then no color set will be deleted.

This operation only works when the MFnMesh refers to a shape.

Parameters

[in]	colorSetName	Name of the color set to delete
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	currentSelection	Since this method may change the selection list, if you wish to undo its effects, you need to keep track of the current active selection. If this selection list is non-null, then the active selection list will be returned in this argument.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus setCurrentColorSetName	(	const MString &	setName,
		MDGModifier *	modifier = NULL,
		MSelectionList *	currentSelection = NULL
	)

Set the "current" or "working" color set for this object.

The "current" color set is the set to use by functions that do not have a specific color set defined.

This operation only works when the MFnMesh is a shape.

Parameters

[in]	setName	Name of color set to make "current"
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	currentSelection	Since this method may change the selection list, if you wish to undo its effects, you need to keep track of the current active selection. If this selection list is non-null, then the active selection list will be returned in this argument.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MString currentColorSetName	(	int	instance = kMFnMeshInstanceUnspecified,
		MStatus *	ReturnStatus = NULL
	)		const

Get the name of the "current" or "working" color set.

The "current" color set is the color set which is used for color operations when no color set is explcitly specified.

If there is no current color set, then a empty string will be returned on the string argument passed on.

On instanced meshes, color sets may be applied on a per-instance basis or may be shared across all instances. When the color sets are per-instance, the concept of the current color set has two levels of granularity. Namely, the current color set applies to one or more instances, plus there are other color sets in the same color set family that apply to different instances. The instance arguement is used to indicate that if this is a per-instance color set, you are interested in the name of the color set that applies to the specified instance. When the index is not specified, the current color set will be returned regardless of which instance it is for.

Parameters

[in]	instance	Instance of the mesh whose set we are interested in, or kMFnMeshInstanceUnspecified for the set which is shared across all instances.
[out]	ReturnStatus	Status code. See below.

Returns

• Name of the "current" color set, if any.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getColorSetNames

(

MStringArray &

setNames

)

const

Get the names of all of the colors sets on this object.

Parameters

[out]

setNames

Array of color set names found

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MStatus getColorSetFamilyNames

(

MStringArray &

familyNames

)

const

Get the names of all of the color set families on this object.

A color set family is a set of per-instance sets with the same name with each individual set applying to one or more instances. A set which is shared across all instances will be the sole member of its family.

Given a color set family name, the method getColorSetsInFamily may be used to determine the names of the associated individual sets.

Parameters

[out]

familyNames

Array of color set names found

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getColorSetsInFamily	(	const MString &	familyName,
		MStringArray &	setNames
	)		const

Get the names of the color sets that belong to this set family.

Per-instance sets will have multiple sets in a family, with each individual set applying to one or more instances. A set which is shared across all instances will be the sole member of its family and will share the same name as its family.

Parameters

[out]	familyName	The color set family name
[out]	setNames	Array of color set names in the family

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

bool isColorSetPerInstance	(	const MString &	name,
		MStatus *	ReturnStatus = NULL
	)		const

Return true if this color set is per-instance, and false if it is shared across all instances.

The name provided may be an individual set name or a set family name.

Parameters

[in]	name	The set name or set family name
[out]	ReturnStatus	Status code

Returns

true if the set is per-instance

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getAssociatedColorSetInstances	(	const MString &	colorSetName,
		MIntArray &	instances
	)		const

Get a list of the instance numbers associated with this color map.

If the color map is shared across all instances, an empty array will be returned.

Note, this method may only be used on an MFnMesh that is initialized using a mesh shape. It will return failure if used on an MFnMesh that has no associated shape.

Parameters

[in]	colorSetName	Name of color set to use
[out]	instances	Instances associated with this color set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred or the name does not exist

MStatus setFaceColor	(	MColor &	color,
		int	faceIndex
	)

Set vertex-face Color for all vertices on this face.

Parameters

[in]	color	The color to set
[in]	faceIndex	The face to set it for

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.
• MS::kInvalidParameter 'faceIndex' was not valid.

MStatus setFaceColor	(	MColor &	color,
		int	faceIndex,
		MColorRepresentation	rep
	)

Set vertex-face Color of specified channels for all vertices on this face.

Parameters

[in]	color	The color to set
[in]	faceIndex	The face to set it for
[in]	rep	The RGB/RGBA/A channel(s) to set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid face index.
• MS::kFailure An object error has occurred.

MStatus setVertexColor	(	MColor &	color,
		int	vertexIndex,
		MDGModifier *	modifier = NULL
	)

Set color for this vertex.

The color is set for the vertex-face in each face that the vertex belongs to.

NOTE: To change the colors of many vertices, it is more efficient to use the batch updating method setVertexColors() instead.

Parameters

[in]	color	The color to set
[in]	vertexIndex	The object-relative (mesh-relative/global) vertex index to set it for
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.
• MS::kInvalidParameter 'vertexIndex' was not valid.

MStatus setVertexColor	(	MColor &	color,
		int	vertexIndex,
		MDGModifier *	modifier,
		MColorRepresentation	rep
	)

Set color of specified channels for this vertex.

The color is set for the vertex-face in each face that the vertex belongs to.

NOTE: To change the colors of many vertices, it is more efficient to use the batch updating method setVertexColors() instead.

Parameters

[in]	color	The color to set
[in]	vertexIndex	The object-relative (mesh-relative/global) vertex index to set it for
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	rep	The RGB/RGBA/A channel(s) to set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid vertex index.
• MS::kFailure An object error has occurred.

MStatus setFaceVertexColor	(	MColor &	color,
		int	faceIndex,
		int	vertexIndex,
		MDGModifier *	modifier = NULL
	)

Set color for this vertex in this face.

Parameters

[in]	color	The color to set
[in]	faceIndex	The face to set it for
[in]	vertexIndex	The object-relative (mesh_relative/global) vertex index to set it for
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.
• MS::kInvalidParameter 'faceIndex' or 'vertexIndex' was not valid.

MStatus setFaceVertexColor	(	MColor &	color,
		int	faceIndex,
		int	vertexIndex,
		MDGModifier *	modifier,
		MColorRepresentation	rep
	)

Set color of specified channels for this vertex in this face.

Parameters

[in]	color	The color to set
[in]	faceIndex	The face to set it for
[in]	vertexIndex	The object-relative (mesh_relative/global) vertex index to set it for
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	rep	The RGB/RGBA/A channel(s) to set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid face or vertex index.
• MS::kFailure An object error has occurred.

MStatus setFaceVertexColor	(	int	faceIndex,
		int	localVertexIndex,
		MColor &	color,
		MDGModifier *	modifier = NULL
	)

Set color for this vertex in this face.

Parameters

[in]	faceIndex	The face to set it for
[in]	localVertexIndex	The face-relative (local) vertex index to set it for
[in]	color	The color to set
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.
• MS::kInvalidParameter 'faceIndex' or 'localVertexIndex' was not valid.

MStatus setFaceVertexColor	(	int	faceIndex,
		int	localVertexIndex,
		MColor &	color,
		MDGModifier *	modifier,
		MColorRepresentation	rep
	)

Set color of specified channels for this vertex in this face.

Parameters

[in]	faceIndex	The face to set it for
[in]	localVertexIndex	The face-relative (local) vertex index to set it for
[in]	color	The color to set
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	rep	The RGB/RGBA/A channel(s) to set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid face or vertex index.
• MS::kFailure An object error has occurred.

MStatus setFaceColors	(	MColorArray &	colors,
		MIntArray &	faceList
	)

Set color for these faces.

The color will be set for each vertex-face component of a face.

Parameters

[in]	colors	The colors to set
[in]	faceList	The faces to set it for

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.
• MS::kInvalidParameter 'faceList' contained an invalid face index or did not have the same number of elements as 'colors'.

MStatus setFaceColors	(	MColorArray &	colors,
		MIntArray &	faceList,
		MColorRepresentation	rep
	)

Set color of specified channels for these faces.

The color will be set for each vertex-face component of a face.

Parameters

[in]	colors	The colors to set
[in]	faceList	The faces to set it for
[in]	rep	The RGB/RGBA/A channel(s) to set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter 'faceList' contained an invalid face index or did not have the same number of elements as 'colors'.
• MS::kFailure An object error has occurred.

MStatus setVertexColors	(	MColorArray &	colors,
		MIntArray &	vertexList,
		MDGModifier *	modifier = NULL
	)

Set color for these vertices.

Parameters

[in]	colors	The colors to set
[in]	vertexList	The vertices to set it for
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.
• MS::kInvalidParameter 'vertexList' contained an invalid vertex index or did not have the same number of elements as 'colors'.

MStatus setVertexColors	(	MColorArray &	colors,
		MIntArray &	vertexList,
		MDGModifier *	modifier,
		MColorRepresentation	rep
	)

Set color of specified channels for these vertices.

Parameters

[in]	colors	The colors to set
[in]	vertexList	The vertices to set it for
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	rep	The RGB/RGBA/A channel(s) to set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter 'vertexList' contained an invalid vertex index or did not have the same number of elements as 'colors'.
• MS::kFailure An object error has occurred.

MStatus setFaceVertexColors	(	MColorArray &	colors,
		MIntArray &	faceList,
		MIntArray &	vertexList,
		MDGModifier *	modifier = NULL
	)

Set colors for these face/vertex pairs.

Parameters

[in]	colors	The colors to set
[in]	faceList	The faces to set it for
[in]	vertexList	The object-relative (mesh-relative/global) vertex indices to set it for
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.
• MS::kInvalidParameter 'faceList' contained an invalid face index, 'vertexList' contained an invalid vertex index, or they did not have the same number of elements as 'colors',

MStatus setFaceVertexColors	(	MColorArray &	colors,
		MIntArray &	faceList,
		MIntArray &	vertexList,
		MDGModifier *	modifier,
		MColorRepresentation	rep
	)

Set colors of specified channels for these face/vertex pairs.

Parameters

[in]	colors	The colors to set
[in]	faceList	The faces to set it for
[in]	vertexList	The object-relative (mesh-relative/global) vertex indices to set it for
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	rep	The RGB/RGBA/A channel(s) to set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter 'faceList' contained an invalid face index, 'vertexList' contained an invalid vertex index, or they did not have the same number of elements as 'colors'.
• MS::kFailure An object error has occurred.

MStatus removeFaceColors

(

MIntArray &

faceList

)

Remove previously set color these faces.

For each face, the color will be unset for each vertex-face component in the face.

Parameters

[in]

faceList

The faces to remove color from

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter 'faceList' contained an invalid face index.
• MS::kFailure An object error has occurred.

MStatus removeVertexColors

(

MIntArray &

vertexList

)

Remove color from these vertices.

Parameters

[in]

vertexList

The object-relative (mesh-relative/global) vertex indices to remove color from

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus removeFaceVertexColors	(	MIntArray &	faceList,
		MIntArray &	vertexList
	)

Remove colors for these face/vertex pairs.

Parameters

[in]	faceList	The faces to remove color for
[in]	vertexList	The corresponding object-relative (mesh-relative/global) vertex indices to remove color for

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter 'faceList' and 'vertexList' did not have the same number of elements.
• MS::kFailure An object error has occurred.

MStatus getVertexColors	(	MColorArray &	colors,
		const MString *	colorSet = NULL,
		const MColor *	defaultUnsetColor = NULL
	)

Get colors for all Vertices of the given colorSet.

If the colorSet is not specified, the default color set will be used. If no vertex/face has color for that vertex, the entry returned will be defaultUnsetColor. If the defaultUnsetColor is not given, then (-1, -1, -1, -1) will be used. If a color was set for some or all the faces for that vertex, an average of those verted/face values where the color has been set will be returned.

Parameters

[out]	colors	Storage for the colors to be returned.
[in]	colorSet	Color set name
[in]	defaultUnsetColor	Default Unset color

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getFaceVertexColors	(	MColorArray &	colors,
		const MString *	colorSet = NULL,
		const MColor *	defaultUnsetColor = NULL
	)

Get colors for all vertex/faces of the given color set.

If the color set is not specified, the default color set will be used. If no vertex/face has color for that vertex, the entry returned will be defaultUnsetColor. If defaultUnsetColor is not given, then (-1, -1, -1, -1) will be used. If a color was set for some but not all the faces for that vertex, the ones where the color has not been explicitly set will have (0,0,0). If a vertex has shared color, the same value will be set for all its vertes/faces.

The colors are returned in face order: e.g. F0V0, F0V1.. F0Vn, F1V0, etc... Use the index returned by getFaceVertexColorIndex if you wish to index directly into the returned color array.

This method is not threadsafe.

Parameters

[out]	colors	Storage for the colors to be returned.
[in]	colorSet	Color set name
[in]	defaultUnsetColor	Default unset color

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getFaceVertexColorIndex	(	int	faceIndex,
		int	localVertexIndex,
		int &	colorIndex,
		const MString *	colorSet = NULL
	)

Get an index into the array returned by getFaceVertexColors.

So that you can index into the array directly, instead of walking it in face-vertex order.

Parameters

[in]	faceIndex	The face to look for
[in]	localVertexIndex	The face-relative (local) vertex id to look for
[out]	colorIndex	Storage for the color index to be returned.
[in]	colorSet	Color set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid face or vertex index.
• MS::kFailure An object error has occurred.

MStatus setColors	(	const MColorArray &	colorArray,
		const MString *	colorSet = NULL
	)

Sets all of the colors for this mesh.

The color array must be at least as large as the current color set size. You can determine the color set size by calling numColors() for the default color set, or numColors(colorSet) for a named color set.

If the array is larger than the color set size, then the color list for this mesh will be grown to accommodate the new color values.

After using this method to set the color values, you can call assignColors to assign the corresponding color ids to the geometry.

In order to shrink the color array, do the following:

• MFnMesh::clearColors()
• MFnMesh::setColors( ... )
• MFnMesh::assignColors()

These steps will let you to create an array of colors which is smaller than the original one.

Parameters

[in]	colorArray	The array of color values to be set
[in]	colorSet	The color set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter The colorArray length is smaller than the number of colors in the set.
• MS::kFailure An object error has occurred.

Examples:

MStatus setColors	(	const MColorArray &	colorArray,
		const MString *	colorSet,
		MColorRepresentation	rep
	)

Sets all of the colors of specified channels for this mesh.

The color array must be at least as large as the current color set size. You can determine the color set size by calling numColors() for the default color set, or numColors(colorSet) for a named color set.

If the array is larger than the color set size, then the color list for this mesh will be grown to accommodate the new color values.

After using this method to set the color values, you can call assignColors to assign the corresponding color ids to the geometry.

In order to shrink the color array, do the following:

• MFnMesh::clearColors()
• MFnMesh::setColors( ... )
• MFnMesh::assignColors()

These steps will let you to create an array of colors which is smaller than the original one.

Parameters

[in]	colorArray	The array of color values to be set
[in]	colorSet	The color set to work with
[in]	rep	The RGB/RGBA/A channel(s) to set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter The colorArray length is smaller than the number of colors in the set.
• MS::kFailure An object error has occurred.

MStatus setSomeColors	(	const MIntArray &	colorIds,
		const MColorArray &	colorArray,
		const MString *	colorSet = NULL
	)

Sets the specified colors for this mesh.

If the largest colorId in the array is larger than numColors() then the color list for this mesh will be grown to accommodate the new color values.

If you have added new colorIds, you can call assignColors to assign the colorIds to the geometry. If you are modifying existing colors, they will already be referenced by the existing mesh data.

Parameters

[in]	colorIds	The array of colorIds to set values for
[in]	colorArray	The array of color values to be set
[in]	colorSet	Color set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter colorArray lengths do not match or the arrays are smaller than numColors().
• MS::kFailure An object error has occurred.

MStatus setSomeColors	(	const MIntArray &	colorIds,
		const MColorArray &	colorArray,
		const MString *	colorSet,
		MColorRepresentation	rep
	)

Sets the specified colors of specified channels for this mesh.

If the largest colorId in the array is larger than numColors() then the color list for this mesh will be grown to accommodate the new color values.

If you have added new colorIds, you can call assignColors to assign the colorIds to the geometry. If you are modifying existing colors, they will already be referenced by the existing mesh data.

Parameters

[in]	colorIds	The array of colorIds to set values for
[in]	colorArray	The array of color values to be set
[in]	colorSet	Color set to work with
[in]	rep	The RGB/RGBA/A channel(s) to set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter colorArray lengths do not match or the arrays are smaller than numColors().
• MS::kFailure An object error has occurred.

MStatus getColors	(	MColorArray &	colorArray,
		const MString *	colorSet = NULL,
		const MColor *	defaultUnsetColor = NULL
	)		const

This method copies the color array for this mesh into the given color array.

Use the index returned by getColorIndex to access the array. If the color is not set for a vertex, defaultUnsetColor will be return. If defaultUnsetColor is not set, (0,0,0,1) will be return.

Parameters

[out]	colorArray	Storage for the color values list
[in]	colorSet	Color set to work with
[in]	defaultUnsetColor	Default unset color

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MStatus getColorIndex	(	int	faceIndex,
		int	localVertexIndex,
		int &	colorIndex,
		const MString *	colorSet = NULL
	)

Get an index into the array returned by getColors.

Parameters

[in]	faceIndex	The face to look for
[in]	localVertexIndex	The face-relative (local) vertex id to look for
[out]	colorIndex	Storage for the color index to be returned.
[in]	colorSet	Color set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful. If no color exists for faceIndex/localVertexIndex, then the colorIndex will return -1.
• MS::kInvalidParameter Invalid face or vertex index.
• MS::kFailure An object error has occurred.

Examples:

MStatus setColor	(	int	colorId,
		const MColor &	color,
		const MString *	colorSet = NULL
	)

Sets the specified color values.

The colorId is the element in the color list that will be set. If the colorId is greater than or equal to numColors() then the color list will be grown to accommodate the specified color.

Parameters

[in]	colorId	The element in the color list to be set
[in]	color	The new color value that is to be set
[in]	colorSet	Color set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus setColor	(	int	colorId,
		const MColor &	color,
		const MString *	colorSet,
		MColorRepresentation	rep
	)

Sets the specified color values of specified channels.

The colorId is the element in the color list that will be set. If the colorId is greater than or equal to numColors() then the color list will be grown to accommodate the specified color.

Parameters

[in]	colorId	The element in the color list to be set
[in]	color	The new color value that is to be set
[in]	colorSet	Color set to work with
[in]	rep	The RGB/RGBA/A channel(s) to set

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getColor	(	int	colorId,
		MColor &	color,
		const MString *	colorSet = NULL,
		const MColor *	defaultUnsetColor = NULL
	)		const

Get the value of the specified texture coordinate from this mesh's color list.

The colorId is the element in the color list that will be retrieved. If the color is not set, defaultUnsetColor will be return. If defaultUnsetColor is not set, (0,0,0,1) will be return.

Parameters

[in]	colorId	The element in the color list to examine
[out]	color	Storage for the color value
[in]	colorSet	Color set to work with
[in]	defaultUnsetColor	default unset color

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid colorId. The colorId should be less than numColors() or numColors(colorSet).
• MS::kFailure An object error has occurred.

MStatus assignColor	(	int	polygonId,
		int	vertexIndex,
		int	colorId,
		const MString *	colorSet = NULL
	)

Maps a color value to a specified vertex of a polygon.

Since color (vertex data) are stored per-polygon per-vertex you must specify both the polygon and the vertex that the color entry is mapped to.

The vertexIndex (face-relative/local) is the vertex within the polygon that the color will be mapped to. This index must be in the range 0 to polygonVertexCount(polygonId).

Parameters

[in]	polygonId	The polygon (face) to map to
[in]	vertexIndex	The face-relative (local) vertex id of the polygon to map to
[in]	colorId	The color entry from the color list that will be mapped
[in]	colorSet	Color set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid polygonId, vertexIndex, or colorId specified.
• MS::kFailure An object error has occurred.

MStatus assignColors	(	const MIntArray &	colorIds,
		const MString *	colorSet = NULL
	)

This method maps all colors for the mesh.

The setColor/setColors method is used to create a color table for the mesh. After the table is created, this method is used to map those values to each polygon on a per-vertex basis. The setColor/setColors method should be called before the assignColors method.

The colorIds array should contain the color indices that will be mapped to each polygon-vertex in the mesh. The entries in this array specify which colors in the mesh's color table are mapped to each polygon-vertex. Each entry in the colorIds array must be less than numColors(), or numColors(colorSet) for a named colorSet. The size of the colorIds array is equivalent to the number of polygon-vertices, so for a cube with all polygons mapped there would be 24 entries.

Parameters

[in]	colorIds	The color indices to be mapped to each polygon-vertex
[in]	colorSet	Color set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid color set or colorIds array.
• MS::kFailure An object error has occurred.

Examples:

MStatus clearColors

(

const MString *

colorSet = NULL

)

This method clears out all color for the mesh, and leaves behind an empty color set.

This method should be used if it is needed to shrink the actual size of the color table. In this case, the user should call clearColors, setColors and then assignColors to rebuild the color mapping info.

When called on a dataMesh, the colors are removed. When called on a shape with no history, the colors are removed and the attributes are set on the shape. When called on a shape with history, the polyColorDel command is invoked and a polyColorDel node is created.

Parameters

[in]

colorSet

Color set to work with

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid colorIds array.
• MS::kInvalidIndex Invalid colorSet was specified
• MS::kFailure An object error has occurred.

bool displayColors

(

MStatus *

ReturnStatus = NULL

)

const

Determine if the mesh node is set to display vertex colors.

The display of vertex colors is controlled by the mesh node itself. It is not part of the mesh data. Therefore this method is only valid when the function set is operating on a mesh node. It will return a failure status if called when the function set is operating on mesh data.

Parameters

[out]

ReturnStatus

The return status of the method

Returns

True if the mesh node is set to display vertex colors. False otherwise.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure The function set was not initialized with a node.

MStatus setDisplayColors

(

bool

enable

)

Set whether the mesh node should display vertex colors.

The display of vertex colors is controlled by the mesh node itself. It is not part of the mesh data. Therefore this method is only valid when the function set is operating on a mesh node. It will return a failure status if called when the function set is operating on mesh data.

Parameters

[in]

enable

True to turn on color display, false to turn it off.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure The function set was not initialized with a node, or the node's displayColors attribute could not be set (e.g. node or attribute is locked).

Examples:

int getHoles	(	MIntArray &	holeInfoArray,
		MIntArray &	holeVertexArray,
		MStatus *	ReturnStatus = NULL
	)

Retrieves a list of the holes in the polygon.

Parameters

[out]	holeInfoArray	Receives an array of integer triples, one for each hole in the mesh. The first element in each triple represents the index of the holed face. The next two elements represent the number of vertices in the hole and the hole's start index in list of hole vertices in holeVertexArray, respectively. For example, if holeInfoArray = [ 0, 3, 0, 1, 4, 3 ], then this means that face 0 contains a 3-vertex hole whose vertex indices are stored in elements 0, 1, 2 of holeVertexArray, and face 1 contains a 4-vertex hole whose vertex indices are stored in elements 3, 4, 5, 6 of holeVertexArray.
[out]	holeVertexArray	Receives an array consisting of the vertex indices of every hole in the mesh. The third element of each triple in holeInfoArray is the index of the start of a particular hole's vertex list in this array.
[out]	ReturnStatus	Status code.

Returns

The number of holes in the mesh.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

bool onBoundary	(	int	polygonId,
		MStatus *	ReturnStatus = NULL
	)		const

A method to determines whether the specified face in the mesh is a boundary face.

Parameters

[in]	polygonId	The polygon (face) to examine
[out]	ReturnStatus	The return status of the method

Returns

• true If the specified edge is on the border of the object.
• false If the specified edge is not on the boundary of the object.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid polygonId was specified
• MS::kFailure An object error has occurred.

bool isBlindDataTypeUsed	(	int	blindDataId,
		MStatus *	ReturnStatus = NULL
	)		const

Is this BlindData type id is already in use in this scene?

Parameters

[in]	blindDataId	The blind data id to check for
[out]	ReturnStatus	Status Code

Returns

true: Id in use, false: id not in use

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MStatus createBlindDataType	(	int	blindDataId,
		MStringArray	longNames,
		MStringArray	shortNames,
		MStringArray	formatNames
	)

Create a new blind data type.

If the type id is already in use, this method will fail. Format names must be one of "int" "float" "double" "boolean" "string" "binary".

Parameters

[in]	blindDataId	The desired id for the new blind data type
[in]	longNames	Attribute long names
[in]	shortNames	Attribute short names
[in]	formatNames	Names of the data types.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Could not create blind data.
• MS::kFailure An object error has occurred.

Examples:

bool hasBlindDataComponentId	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MStatus *	ReturnStatus = NULL
	)		const

Does this component have blind data with the given ID.

Parameters

[in]	compID	The component to check for blind data om When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[out]	ReturnStatus	Status Code

Returns

true: has the specified blind data, false: does not

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

bool hasBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MStatus *	ReturnStatus = NULL
	)		const

Returns true if any component of the given type on this mesh have blind data with the given ID.

Parameters

[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[out]	ReturnStatus	Status Code

Returns

true: has the specified blind data, false: does not

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

bool hasBlindDataComponentId	(	int	compID,
		MFn::Type	compType,
		MStatus *	ReturnStatus = NULL
	)		const

Does this component have any kind of blind data.

Parameters

[in]	compID	The component to check for blind data on When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[out]	ReturnStatus	Status Code

Returns

true: has the specified blind data, false: does not

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

bool hasBlindData	(	MFn::Type	compType,
		MStatus *	ReturnStatus = NULL
	)		const

Does any component of this type have any blind data.

(.e. is there any vertex blind data on this mesh?)

Parameters

[in]	compType	The component type e.g. MFn::kMeshVertComponent
[out]	ReturnStatus	Status Code

Returns

true: has the specified blind data, false: does not

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getBlindDataTypes	(	MFn::Type	compType,
		MIntArray &	blindDataIds
	)		const

Get the list of blind data ID's associated with the given component type on this mesh.

(e.g. all blind data ID's present on vertex compontents)

Parameters

[in]	compType	The component type e.g. MFn::kMeshVertComponent
[out]	blindDataIds	space for this list of blind data id values.

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getBlindDataAttrNames	(	int	blindDataId,
		MStringArray &	longNames,
		MStringArray &	shortNames,
		MStringArray &	formatNames
	)		const

Get the blind data attribute names and types for the specified blind data type id.

Format names will be one of "int" "float" "double" "boolean" "string" "binary".

Parameters

[in]	blindDataId	The blind data id to check for
[out]	longNames	Space for the attribute long names
[out]	shortNames	Space for the attribute short names
[out]	formatNames	Space for the data format names

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred. The specified blind data type does not exist.

MStatus getFaceVertexBlindDataIndex	(	int	faceIndex,
		int	vertexIndex,
		int &	blindDataIndex
	)		const

Get the single index to retrieve face-vertex blind data.

Parameters

[in]	faceIndex	The face index to look for
[in]	vertexIndex	The object-relative (mesh-relative/global) vertex index
[out]	blindDataIndex	The component index for face vertex blind data storage to be returned

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid face or vertex index.
• MS::kFailure An object error has occurred.

MStatus getBlindDataFaceVertexIndices	(	int	blindDataIndex,
		int &	faceIndex,
		int &	vertexIndex
	)		const

Get the face and vertex indices from the face-vertex blind data index.

Parameters

[in]	blindDataIndex	The component index for face vertex blind data storage to decompose
[in]	faceIndex	The corresponding face index to be returned
[out]	vertexIndex	The object-relative (mesh-relative/global) vertex index to be returned

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid blind data, face or vertex index.
• MS::kFailure An object error has occurred.

MStatus getIntBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		int &	data
	)		const

Get the blind data value for the specified blind data attribute of the specified component.

If the type of the attribute is not correct, this method will fail.

Parameters

[in]	compID	The component to get for blind data on. When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[in]	attrName	The attribute name
[out]	data	Space for the data item

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getIntBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	compIDs,
		MIntArray &	data
	)		const

Get the blind data value for the specified blind data attribute of the given type of component.

If the type of the attribute is not correct, this method will fail.

Parameters

[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[in]	attrName	The attribute name
[out]	compIDs	Space for the component indexes of the items When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[out]	data	Space for the data items

Returns

true: has the specified blind data, false: does not

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getFloatBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		float &	data
	)		const

Get the blind data value for the specified blind data attribute of the specified component.

If the type of the attribute is not correct, this method will fail.

Parameters

[in]	compID	The component to get for blind data on When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[in]	attrName	The attribute name
[out]	data	Space for the data item

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getFloatBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	compIDs,
		MFloatArray &	data
	)		const

Get the blind data value for the specified blind data attribute for all components of the given type.

If the type of the attribute is not correct, this method will fail.

Parameters

[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[in]	attrName	The attribute name
[out]	compIDs	Space for the component indexes of the items When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[out]	data	Space for the data items

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getDoubleBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		double &	data
	)		const

Get the blind data value for the specified blind data attribute of the specified component.

If the type of the attribute is not correct, this method will fail.

Parameters

[in]	compID	The component to get for blind data on When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[in]	attrName	The attribute name
[out]	data	Space for the data item

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getDoubleBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	compIDs,
		MDoubleArray &	data
	)		const

Get the blind data value for the specified blind data attribute for all components of the given type.

If the type of the attribute is not correct, this method will fail.

Parameters

[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[in]	attrName	The attribute name
[out]	compIDs	Space for the component indexes of the items When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[out]	data	Space for the data items

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getBoolBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		bool &	data
	)		const

Get the blind data value for the specified blind data attribute of the specified component.

If the type of the attribute is not correct, this method will fail.

Parameters

[in]	compID	The component to get for blind data on When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[in]	attrName	The attribute name
[out]	data	Space for the data item

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getBoolBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	compIDs,
		MIntArray &	data
	)		const

Get the blind data value for the specified blind data attribute for all components of the given type.

If the type of the attribute is not correct, this method will fail.

Parameters

[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[in]	attrName	The attribute name
[out]	compIDs	Space for the component indexes of the items When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[out]	data	Space for the data items (note that we return the bool data as an MIntArray since we don't have a convenient bool array type

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MString stringBlindDataComponentId	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MStatus *	ReturnStatus = NULL
	)		const

Get the blind data value for the specified blind data attribute of the specified component.

If the type of the attribute is not correct, this method will fail.

Parameters

[in]	compID	The component to get for blind data on When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[in]	attrName	The attribute name
[out]	ReturnStatus	Status code. See below.

Returns

Blind data.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getStringBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	compIDs,
		MStringArray &	data
	)		const

Get the blind data value for the specified blind data attribute for all components of the given type.

If the type of the attribute is not correct, this method will fail.

Parameters

[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[in]	attrName	The attribute name
[out]	compIDs	Space for the component indexes of the items When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[out]	data	Space for the data items (note that we return the bool data as an MIntArray since we don't have a convenient bool array type

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MString binaryBlindDataComponentId	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MStatus *	ReturnStatus = NULL
	)		const

Get the blind data value for the specified blind data attribute of the specified component.

If the type of the attribute is not correct, this method will fail.

Parameters

[in]	compID	The component to get for blind data on When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[in]	attrName	The attribute name
[out]	ReturnStatus	Status code. See below.

Returns

The data item.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getBinaryBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	compIDs,
		MStringArray &	data
	)		const

Get the blind data value for the specified blind data attribute for all components of the given type.

If the type of the attribute is not correct, this method will fail.

Parameters

[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The blind data id to check for
[in]	attrName	The attribute name
[out]	compIDs	Space for the component indexes of the items When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[out]	data	Space for the data items (note that we return the bool data as an MIntArray since we don't have a convenient bool array type

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus setIntBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		int	data
	)

Set a value for an integer blind data attribute.

Parameters

[in]	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	Attribute value

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setIntBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		int	data
	)

Set a value for an integer blind data on an array of components.

Parameters

[in]	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	Attribute value

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setIntBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	data
	)

Set a values for an integer blind data on an array of components.

The arrays of values and components must be the same size.

Parameters

[in]	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	The attribute values for each component

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setFloatBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		float	data
	)

Set a value for a float blind data attribute.

Parameters

[in]	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	Attribute value

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setFloatBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		float	data
	)

Set a value for float blind data on an array of components.

Parameters

[in]	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	Attribute value

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setFloatBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MFloatArray &	data
	)

Set a values for a float blind data on an array of components.

The arrays of values and components must be the same size.

Parameters

[in]	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	The attribute values for each component

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setDoubleBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		double	data
	)

Set a value for a double blind data attribute.

Parameters

[in]	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	Attribute value

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not set blind data.
• MS::kFailure An object error has occurred.

Examples:

MStatus setDoubleBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		double	data
	)

Set a value for double blind data on an array of components.

Parameters

[in]	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	Attribute value

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setDoubleBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MDoubleArray &	data
	)

Set a values for a double blind data on an array of components.

The arrays of values and components must be the same size.

Parameters

[in]	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	The attribute values for each component

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setBoolBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		bool	data
	)

Set a value for a boolean blind data attribute.

Parameters

[in]	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	Attribute value

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setBoolBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		bool	data
	)

Set a value for boolean blind data on an array of components.

Parameters

[in]	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	Attribute value

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setBoolBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	data
	)

Set a values for a boolean blind data on an array of components.

The arrays of values and components must be the same size.

Parameters

[in]	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	The attribute values for each component

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setStringBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MString	data
	)

Set a value for a string blind data attribute.

Parameters

[in]	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	Attribute value

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setStringBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MString	data
	)

Set a value for string blind data on an array of components.

Parameters

[in]	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	Attribute value

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setStringBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MStringArray &	data
	)

Set a values for a string blind data on an array of components.

The arrays of values and components must be the same size.

Parameters

[in]	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	The attribute values for each component

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setBinaryBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MString	data
	)

Set a value for a binary blind data attribute.

Parameters

[in]	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	Attribute value as an MString. Note that the physical size must be set explicitly for binary data.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setBinaryBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MString	data
	)

Set a value for binary blind data on an array of components.

Parameters

[in]	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	Attribute value

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setBinaryBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MStringArray &	data
	)

Set a values for a binary blind data on an array of components.

The arrays of values and components must be the same size.

Parameters

[in]	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	The attribute values for each component

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Could not set blind data.
• MS::kFailure An object error has occurred.

MStatus setBinaryBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		char *	data,
		int	length
	)

Set a value for a binary blind data attribute.

Parameters

[in]	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The desired id for the new blind data type
[in]	attrName	Attribute name
[in]	data	Attribute value as a char string
[in]	length	Length of char string to use

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus clearBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName
	)

Delete a value for a binary blind data attribute on a particular componenr.

Parameters

[in]	compID	The component to clear the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The id for the blind data to be cleared
[in]	attrName	Attribute name

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not clear blind data.
• MS::kFailure An object error has occurred.

MStatus clearBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName
	)

Delete the values for the given attribute on the given binary blind data type from all components of the given type.

Parameters

[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The id for the blind data to be cleared
[in]	attrName	The attribute to clear the blind data for

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not clear blind data.
• MS::kFailure An object error has occurred.

MStatus clearBlindData

(

MFn::Type

compType

)

Delete all blind data from components of the given type, e.g.

all edges from a particular component.

Parameters

[in]

compType

The component type e.g. MFn::kMeshVertComponent

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not clear blind data.
• MS::kFailure An object error has occurred.

MStatus clearBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId
	)

Delete the values for a binary blind data type (all its attributes) from a particular component.

Parameters

[in]	compID	The component to clear the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The id for the blind data to be cleared

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not clear blind data.
• MS::kFailure An object error has occurred.

MStatus clearBlindData	(	MFn::Type	compType,
		int	blindDataId
	)

Delete the values for a binary blind data type (all its attributes) from all components of the given type.

Parameters

[in]	compType	The component type e.g. MFn::kMeshVertComponent
[in]	blindDataId	The id for the blind data to be cleared

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kInvalidParameter Invalid component id or type, or could not clear blind data.
• MS::kFailure An object error has occurred.

MString componentTypeName ( MFn::Type  compType, MStatus &  status  )

static

Get a string representing a particular component type.

Parameters

[in]	compType	The type of component to fetch
[out]	status	Status Code

Returns

String representing the component type, empty string if invalid

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure The component type was not recognized.

MFn::Type componentTypeFromName ( const MString &  assocName )

static

Get a component type from its string name.

Parameters

[in]

assocName

String representing the component type

Returns

• MFn::kInvalid The method failed to match the type.
• MFn::kMeshEdgeComponent The component type is 'edge'.
• MFn::kMeshPolygonComponent The component type is 'face'.
• MFn::kMeshVertComponent The component type is 'vertex'.
• MFn::kMeshFaceVertComponent The component type is 'faceVertex'.

void setCheckSamePointTwice

(

bool

check = true

)

This method allows the turning on or off of duplicate point checking when polygons are created or added using this class.

Checking for duplicates, is the default state.

Parameters

[in]

check

true for checking, false otherwise

bool getCheckSamePointTwice

(

void

)

Return true if checking for duplicate points is turned on.

Return false otherwise.

MStatus createInPlace	(	int	numVertices,
		int	numPolygons,
		const MFloatPointArray &	vertexArray,
		const MIntArray &	polygonCounts,
		const MIntArray &	polygonConnects
	)

Replaces the existing polygonal mesh with a new one specified by array of vertices and polygon connection information.

This function will then operate on the replacement surface.

This method is meant to be as efficient as possible and thus assumes that all the given data is topologically correct.

If the functionset is operating on a mesh node with construction history, this method will fail as the node will continue to get its geometry from its history connection. To use this method you must first break the history connection.

Parameters

[in]	numVertices	number of vertices
[in]	numPolygons	number of polygons
[in]	vertexArray	point (vertex) array. This should include all the vertices in the mesh, and no extras. For example, a cube could have the vertices: { (-1,-1,-1), (1,-1,-1), (1,-1,1), (-1,-1,1), (-1,1,-1), (-1,1,1), (1,1,1), (1,1,-1) }
[in]	polygonCounts	array of vertex counts for each polygon. For example the cube would have 6 faces, each of which had 4 verts, so the polygonCounts would be {4,4,4,4,4,4}.
[in]	polygonConnects	array of vertex connections for each polygon. For example, in the cube, we have 4 vertices for every face, so we list the vertices for face0, face1, etc consecutively in the array. These are specified by indexes in the vertexArray: e.g for the cube: { 0, 1, 2, 3, 4, 5, 6, 7, 3, 2, 6, 5, 0, 3, 5, 4, 0, 4, 7, 1, 1, 7, 6, 2 }

Returns

• MS::kSuccess The method was successful.
• MS::kLicenseFailure Application not licensed for attempted operation
• MS::kInvalidParameter Array length does not match given item count; parentOrOwner was not valid; or there was no model present to add the object to
• MS::kFailure An object error has occurred or mesh has history.
• MS::kInsufficientMemory Insufficient memory to complete this method

Examples:

MStatus copyInPlace

(

const MObject &

source

)

This method creates copies the given source mesh onto the current surface.

After the copy this function set continues operate on the original mesh.

Parameters

[in]

source

the mesh to be copied

Returns

• MS::kSuccess The method was successful.
• MS::kLicenseFailure Application not licensed for attempted operation
• MS::kInvalidParameter Source object was not one of kMeshGeom, kMeshData, kMesh; or dataMesh or underlying geometry was null
• MS::kFailure An object error has occurred; or there was no model present to add the object to
• MS::kInsufficientMemory Insufficient memory to complete this method

MStatus polyTriangulate ( const float *  pointsAndHoles, unsigned int  pointsCount, unsigned int  outerPointsCount, unsigned int  holesCount, bool  considerNormal, const float *  normals, unsigned short *  triangles, int &  trianglesCount  )

static

Triangulates a polygon.

The polygon consists of 2D positions with optional 3D normals and holes. These 2D positions can be in any coordinate system. 3D positions can be projected to a 2D plane by its face normal. 3D normals are references to help triangulation. This function can work without normals but normals can improve the quality. This function works with pointers and is more efficient than the other variant.

Parameters

[in]	pointsAndHoles	Array of 2D positions and hole description. The array contains 2D positions (x,y) followed by the hole offsets. For example, if pointsAndHoles = [x1, y1, x2, y2, ..., x9, y9, o1, o1, o2, o2], then this means that (x1, y1) ~ (x9, y9) are positions, o1 is the offset for the first loop and o2 is the offset for the second loop.
[in]	pointsCount	The number of 2D positions in pointsAndHoles
[in]	outerPointsCount	The number of outer (non-hole) 2D positions in pointsAndHoles
[in]	holesCount	The number of holes in pointsAndHoles
[in]	considerNormal	If true then normals are considered during triangulation
[in]	normals	Array of 3D normals. If considerNormal is false, this array can be NULL. If considerNormal is true, then there must be one normal per point.
[out]	triangles	Array of triangle indices into pointsAndHoles array. The size of this array is trianglesCount * 3
[out]	trianglesCount	The number of triangles written in triangles array

Returns

Status Code

Status Codes:

• MS::kSuccess The triangulation was successful.
• MS::kFailure The triangulation was failed.

Examples:

MStatus polyTriangulate ( const MFloatPointArray &  points, const MIntArray &  holes, unsigned int  outerPointsCount, const MFloatVectorArray &  normals, MIntArray &  triangles  )

static

Triangulates a polygon.

The polygon consists of positions with optional normals and holes. Normals are references to help triangulation. This function can work without normals but normals can improve the quality. A simple example:

MFloatPointArray Points; MIntArray Holes; MFloatVectorArray Normals; MIntArray Triangles;

Points.append(MFloatPoint(-1, 0, -1)); Points.append(MFloatPoint(-1, 0, 1)); Points.append(MFloatPoint(1, 0, 1)); Points.append(MFloatPoint(1, 0, -1)); Points.append(MFloatPoint(0.5, 0, -0.5)); Points.append(MFloatPoint(0.5, 0, 0.5)); Points.append(MFloatPoint(-0.5, 0, 0.5)); Points.append(MFloatPoint(-0.5, 0, -0.5)); Holes.append(4) // the 1st hole starts at 4th in Points for (unsigned int i = 0; i < 8; i++) Normals.append(MFloatVector(0, 1, 0));

MFnMesh::polyTriangulate(Points, Holes, 4, Normals, Triangles)

Parameters

[in]	points	Array of 3D points. The poly's outer vertices come first, followed by the vertices for each hole.
[in]	holes	Array of offsets into the 'points' array indicating where each hole's vertices start.
[in]	outerPointsCount	The number of outer (non-hole) positions in points array
[in]	normals	Array of normals. This array can be empty. If this array is not empty, then there must be one normal per point.
[out]	triangles	Array of triangle indices into points array

Returns

Status Code

Status Codes:

• MS::kSuccess The triangulation was successful.
• MS::kFailure The triangulation was failed.

MString createColorSetWithName	(	const MString &	colorSetName,
		MDGModifier *	modifier,
		MStatus *	ReturnStatus
	)

This method is obsolete.

Deprecated:

Use createColorSetWithName(const MString &, MDGModifier *, const MUintArray *, MStatus *)

Create a new empty color set for this mesh. If the name passed in is empty (zero length), or a color set with the same name already exists, then a new unique name is generated and used as the new color set's name.

In the case where the name is empty, the new name will be of the format "colorSet#" where # is a number that makes the name unique for this mesh.

In the case where a color set already exists with the same name as the name passed in, then the new name will be of the format "userName#", where "userName" was the name specified, and # is a number appended on to "userName" to make the name unique for this mesh.

This operation will only work when the MFnMesh refers to a shape.

Parameters

[in]	colorSetName	The name of the color set to add.
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	ReturnStatus	Status code. See below.

Returns

The resulting name of the color set.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MObject generateSmoothMesh	(	MObject	parentOrOwner,
		MStatus *	ReturnStatus
	)

This method is obsolete.

Deprecated:

Use generateSmoothMesh(MObject, MMeshSmoothOptions * , MStatus *) instead.

Creates a new polygonal mesh using the Smooth Mesh Preview attributes of this mesh. Unlike the MFnMesh::create functions, this function does not set this function set to operate on the new surface.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

Parameters

[in]	parentOrOwner	parent of the polygon that will be created
[out]	ReturnStatus	Status code

Returns

• If parentOrOwner is NULL then the transform for this surface is returned
• If parentOrOwner is a DAG object then the new surface shape is returned
• The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

• MS::kSuccess The method was successful.
• MS::kLicenseFailure Application not licensed for attempted operation
• MS::kInvalidParameter parentOrOwner was not valid; or there was no model present to add the object to
• MS::kFailure An object error has occurred.
• MS::kInsufficientMemory Insufficient memory to complete this method

MString currentColorSetName

(

MStatus *

ReturnStatus

)

const

This method is obsolete. This method is not available in Python.

Deprecated:

Use MFnMesh::currentColorSetName(int, MStatus*) instead.

Get the name of the "current" or "working" color set. The "current" color set is the color set which is used for color operations when no color set is explcitly specified.

If there is no current color set, then a empty string will be returned on the string argument passed on.

Parameters

[out]

ReturnStatus

Status code. See below.

Returns

• Name of the "current" color set, if any.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MObject addPolygon	(	MPointArray &	vertexArray,
		double	polyTolerance,
		bool	mergeVertices = true,
		double	pointTolerance = kMFnMeshPointTolerance,
		bool	forceGeometry = true,
		MObject	parentOrOwner = MObject::kNullObj,
		MStatus *	ReturnStatus = NULL
	)

This method is obsolete. This method is not available in Python.

Deprecated:

Use the other MFnMesh::addPolygon method.

Adds a new polygon to this polygonal mesh.

If there is no current geometry then a new polygonal mesh is created and parentOrOwner is used to specify the owner of the new surface. If parentOrOwner is NULL or a DAG parent is specified, then a new transform will be created in the DAG and returned. If the parentOrOwner is kMeshData then the new surface will become its data and the geometry will be returned.

If we are adding to an existing polygonal mesh then parentOrOwner is ignored and the geometry is returned.

Parameters

[in]	vertexArray	array of ordered vertices that make up the polygon
[in]	polyTolerance	specifies the planar tolerance for the mesh. If all the verticies of a polygon are within this distance of the best fit computed plane between them, the polygon is considered to be planar.
[in]	mergeVertices	If true then if a vertex falls within pointTolerance of an existing vertex then the existing vertex is reused.
[in]	pointTolerance	specifies how close verticies have to be to before they are merged. This merging is only done if mergeVerticies is true.
[in]	forceGeometry	if true handle no-manifold topology regardless of non connectivity
[in]	parentOrOwner	the DAG parent or kMeshData the new surface will belong to
[out]	ReturnStatus	status code

Returns

The transform if one is created, otherwise the geometry.

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

bool intersect	(	MPoint &	raySource,
		MVector &	rayDirection,
		MPointArray &	points,
		MStatus *	ReturnStatus = NULL
	)		const

This method is obsolete. This method is not available in Python.

Deprecated:

Use the other MFnMesh::intersect method.

Determines whether the given ray intersects this polygon and if so, returns the points of intersection. The points of intersection will be in order of closest point to the raySource.

This method is not threadsafe when invoked by multiple threads on the same object at the same time. It is threadsafe as long as each thread operates on a different mesh object.

Parameters

[in]	raySource	Starting point for the ray
[in]	rayDirection	Direction of the ray
[out]	points	Storage for any points of intersection
[out]	ReturnStatus	Status code

Returns

• true The given ray intersects this polygon
• false The given ray does not intersect this polygon

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

bool intersect	(	const MPoint &	raySource,
		const MVector &	rayDirection,
		MPointArray &	points,
		MStatus *	ReturnStatus = NULL
	)		const

This method is obsolete. This method is not available in Python.

Deprecated:

Use the other MFnMesh::intersect method.

Determines whether the given ray intersects this polygon and if so, returns the points of intersection. The points of intersection will be in order of closest point to the raySource.

This method is not threadsafe when invoked by multiple threads on the same object at the same time. It is threadsafe as long as each thread operates on a different mesh object.

Parameters

[in]	raySource	Starting point for the ray
[in]	rayDirection	Direction of the ray
[out]	points	Storage for any points of intersection
[out]	ReturnStatus	Status code

Returns

• true The given ray intersects this polygon
• false The given ray does not intersect this polygon

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getBlindDataAttrNames	(	int	blindDataId,
		MStringArray &	longNames,
		MStringArray &	shortNames
	)		const

Get the blind data attribute names for the specified blind data type id.

Parameters

[in]	blindDataId	The blind data id to check for
[out]	longNames	Space for the attribute long names
[out]	shortNames	Space for the attribute short names

Returns

Status Code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

bool hasBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MStatus *	ReturnStatus = NULL
	)		const

This method is obsolete. This method is not available in Python.

Deprecated:

Use MFnMesh::hasBlindDataComponentId instead.

Parameters

[in]	compID
[in]	compType
[in]	blindDataId
[out]	ReturnStatus

bool hasBlindData	(	int	compID,
		MFn::Type	compType,
		MStatus *	ReturnStatus = NULL
	)		const

This method is obsolete. This method is not available in Python.

Deprecated:

Use MFnMesh::hasBlindDataComponentId instead.

Parameters

[in]	compID
[in]	compType
[out]	ReturnStatus

MStatus createUVSet	(	MString &	uvSetName,
		MDGModifier *	modifier = NULL,
		const MUintArray *	instances = NULL
	)

This method is not available in Python.

Create a new empty uv set for this mesh. If the name passed in is empty (zero length), or a uv set with the same name already exists, then a new unique name is generated and used as the new uvset's name.

In the case where the name is empty, the new name will be of the format "uvSet#" where # is a number that makes the name unique for this mesh.

In the case where a uvset already exists with the same name as the name passed in, then the new name will be of the format "userName#", where "userName" was the name specified, and # is a number appended on to "userName" to make the name unique for this mesh.

This operation will only work when the MFnMesh refers to a shape.

Python Notes

This method is not supported in Python. Please see createUVSetWithName()

Parameters

[in]	uvSetName	The name of the uv set to add. This name will be overwritten with a different name, if a new name needed to be generated.
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	instances	The instance number(s) for which the set should be added, or NULL if the uv-set should be shared by all instances.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MStatus copyUVSet	(	const MString &	fromName,
		MString &	toName,
		MDGModifier *	modifier = NULL
	)

This method is not available in Python.

Copies a uv set from one to another for this mesh. The source must exist. The following cases can occur:

1) If the destination name is the same as the source than no copy will be made. 2) If the destination name exists a copy will be made to the destination. 3) If the destination name does not exist, then a new uv set will be created with a unique name, and then the copy will be made. The name generated will be "destinationName>#", where "destinationName" is the original name sent in, and "#" is a ascending number appended to the end of the original name.

This operation will only work when the MFnMesh refers to a shape.

Python Notes

This method is not supported in Python. Please see the one which returns a string

Parameters

[in]	fromName	The name of the uv set to change
[in]	toName	The name to set the uv set to. May be modified to return the final name used in the case where a new name needs to be generated.
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getCurrentUVSetName	(	MString &	setName,
		int	instance = kMFnMeshInstanceUnspecified
	)		const

This method is not available in Python.

Get the name of the "current" uv set. The "current" uv set is the uv set which is used for uv operations when no uv set is explcitly specified.

If there is no current uv set, then a empty string will be returned on the string argument passed on.

On instanced meshes, uv sets may be applied on a per-instance basis or may be shared across all instances. When the uv sets are per-instance, the concept of the current uv set has two levels of granularity. Namely, the current uv set applies to one or more instances, plus there are other uv sets in the same uv set family that apply to different instances. The instance arguement is used to indicate that if this is a per-instance uv set, you are interested in the name of the uv set that applies to the specified instance. When the index is not specified, the current uv set will be returned regardless of which instance it is for.

Note, the instance argument is only applicable on an MFnMesh that is initialized using a mesh shape. It will return failure if used on an MFnMesh that has no associated shape.

Python Notes

This method is not supported in Python. Please see the one which returns a string.

Parameters

[out]	setName	Name of the "current" uv set, if any.
[in]	instance	Instance of the mesh whose set we are interested in, or kMFnMeshInstanceUnspecified for the set which is shared across all instances.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Examples:

MStatus createColorSet	(	MString &	colorSetName,
		MDGModifier *	modifier = NULL,
		const MUintArray *	instances = NULL
	)

This method is not available in Python.

Create a new empty color set for this mesh. If the name passed in is empty (zero length), or a color set with the same name already exists, then a new unique name is generated and used as the new color set's name.

In the case where the name is empty, the new name will be of the format "colorSet#" where # is a number that makes the name unique for this mesh.

In the case where a color set already exists with the same name as the name passed in, then the new name will be of the format "userName#", where "userName" was the name specified, and # is a number appended on to "userName" to make the name unique for this mesh.

This operation will only work when the MFnMesh refers to a shape.

Python Notes

This method is not supported in Python. Please see createColorSetWithName()

Parameters

[in]	colorSetName	The name of the color set to add. This name will be overwritten with a different name, if a new name needed to be generated.
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	instances	The instance number(s) for which the set should be added, or NULL if the uv-set should be shared by all instances.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus createColorSet	(	MString &	colorSetName,
		MDGModifier *	modifier,
		bool	clamped,
		MColorRepresentation	rep,
		const MUintArray *	instances = NULL
	)

This method is not available in Python.

Create a new empty color set of specified channels for this mesh. If the name passed in is empty (zero length), or a color set with the same name already exists, then a new unique name is generated and used as the new color set's name.

In the case where the name is empty, the new name will be of the format "colorSet#" where # is a number that makes the name unique for this mesh.

In the case where a color set already exists with the same name as the name passed in, then the new name will be of the format "userName#", where "userName" was the name specified, and # is a number appended on to "userName" to make the name unique for this mesh.

This operation will only work when the MFnMesh refers to a shape.

Python Notes

This method is not supported in Python. Please see createColorSetWithName()

Parameters

[in]	colorSetName	The name of the color set to add. This name will be overwritten with a different name, if a new name needed to be generated.
[in,out]	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
[in]	clamped	The color set stores values in 0 to 1 range if true. no range limit if false
[in]	rep	The color set stores RGB, RGBA, or Alpha
[in]	instances	The instance number(s) for which the set should be added, or NULL if the uv-set should be shared by all instances.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getCurrentColorSetName	(	MString &	setName,
		int	instance = kMFnMeshInstanceUnspecified
	)		const

This method is not available in Python.

Get the name of the "current" or "working" color set. The "current" color set is the color set which is used for color operations when no color set is explcitly specified.

If there is no current color set, then a empty string will be returned on the string argument passed on.

On instanced meshes, color sets may be applied on a per-instance basis or may be shared across all instances. When the color sets are per-instance, the concept of the current color set has two levels of granularity. Namely, the current color set applies to one or more instances, plus there are other color sets in the same color set family that apply to different instances. The instance arguement is used to indicate that if this is a per-instance color set, you are interested in the name of the color set that applies to the specified instance. When the index is not specified, the current color set will be returned regardless of which instance it is for.

Note, the instance argument is only applicable on an MFnMesh that is initialized using a mesh shape. It will return failure if used on an MFnMesh that has no associated shape.

Python Notes

This method is not supported in Python. Please see currentColorSetName().

Parameters

[out]	setName	Name of the "current" color set, if any.
[in]	instance	Instance of the mesh whose color set we are interested in, or kMFnMeshInstanceUnspecified for the color set which is shared across all instances.

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

MStatus getStringBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MString &	data
	)		const

This method is obsolete. This method is not available in Python.

Deprecated:

Use MFnMesh::stringBlindDataComponentId instead.

Parameters

[in]	compID
[in]	compType
[in]	blindDataId
[in]	attrName
[out]	data

MStatus getBinaryBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MString &	data
	)		const

This method is obsolete. This method is not available in Python.

Deprecated:

Use MFnMesh::binaryBlindDataComponentId instead.

Parameters

[in]	compID
[in]	compType
[in]	blindDataId
[in]	attrName
[out]	data

const adsk::Data::Associations * metadata ( MStatus *  ReturnStatus = NULL ) const

virtual

This method is not available in Python.

Get the current metadata associated with this mesh.

When the MFnMesh is a mesh node then the metadata returned will be that associated with the output mesh attribute. When it is simple mesh data then the metadata returned is that belonging directly to that mesh data.

Metadata is shared and reference counted so the sequence of events for editing metadata inside a node with an input mesh and output mesh is: MFnMesh inMesh = theInputMesh(); MFnMesh outMesh = theOutputMesh(); const adsk::Data::Associations newMetadata( inMesh.metadata() ); doMetadataEditing( newMetadata ); outMesh.setMetadata( &newMetadata ); The "doMetadataEditing" call will take care of copying anything you are changing so that there is a minimum amount of duplication. After this sequence the inMesh and outMesh will contain different metadata.

Parameters

[out]

ReturnStatus

Status code. See below.

Returns

Metadata associated with the mesh, NULL if there isn't any

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure An object error has occurred.

Reimplemented from MFnDependencyNode.

MStatus setMetadata ( const adsk::Data::Associations &  newMetadata )

virtual

This method is not available in Python.

Replace the existing metadata with the given values.

Parameters

[in]

newMetadata

The new associated metadata for this mesh

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure The metadata could not be set onto this node.

Reimplemented from MFnDependencyNode.

MStatus validateMetadata ( MString &  errors ) const

virtual

This method is not available in Python.

Verify consistency in all of the existing metadata channels The intended use of this method is to check that the metadata channels are still internally consistent after operations have been performed on the underlying mesh (right number of vertexes, edges, faces, logical connectivity, sensible index values).

It's not meant to provide data validation (e.g. make sure a certain data in a channel is within it's legal range).

Parameters

[out]

errors

String containing information about what went wrong

Returns

Status code

Status Codes:

• MS::kSuccess The method was successful.
• MS::kFailure A consistency error was found. Check error string for details.

Reimplemented from MFnDependencyNode.

---

The documentation for this class was generated from the following files:

• MFnMesh.h
• MFnMesh.cpp