Use Smooth (G2) to create a curvature continuous (G2) condition between a spline and another curve, such as a line, arc, or spline. The Smooth constraint is available in a 2D or 3D sketch or a drawing sketch.
- On the ribbon, click
Sketch tab
Constrain panel
Smooth (G2)
. - Click the spline and the curve attached to the spline endpoint to add the Smooth constraint. The spline curvature adjusts as required to create a G2 condition.
- Continue to place smooth (G2) constraints, or do one of the following to quit:
- Right-click, and select Done.
- Press Esc.
- Select another command.
Show Me how to create a curvature-continuous constraint