 |
Punches a 3D shape into a sheet metal face. At least one hole center must exist on the selected sheet metal face. The iFeature designed to be used with the Punch tool must be a 3D solid based on a sketch with a single hole center. |
|
Access: |
Ribbon:
Sheet Metal tab
Modify panel
Punch Tool
Then, select a punch in the Punch Tool Directory and click Open for the Punch Tool dialog box. |
Preview
Location - Allows selection of a folder which contains Sheet Metal Punch iFeatures.
Punch - Allows selection of Sheet Metal Punch iFeature from folder specified in Location field. Selected iFeature previews in the graphic pane to the left of the selection listing.
Geometry
|
Adds and removes instances of an iFeature, selects controls its planar rotational angle, and satisfies unresolved geometric references. |
|
|
Centers |
Automatically selects hole centers used to position the iFeature. If more than 1 hole center exists on the sheet metal face, an iFeature is placed on each hole center. Note: To remove one or more instances of a punch shape, press Ctrl and click a hole center.
|
|
Angle |
Specifies the planar angle used to position the iFeature. Controls the angle the iFeature is rotated from the default position. |
|
Refresh |
Redraws the iFeature with geometry requirements fulfilled. |
 |
When enabled (dark blue-filled circle) indicates the availability of an attached document file associated with the iFeature that discusses placement details. Select to display document. |
Size
Changes the size of the punch shape by modifying its parameters.
Lists Name and Value of each parameter controlling the shape of the iFeature. Double-click a Value to change it. A pencil displays beside the active parameter.
Refresh - Redraws the iFeature with geometry requirements fulfilled.
Finish - Creates the Sheet Metal Punch iFeature on the face of the part.
Cancel - Discards all input and closes the Punch Tool dialog box.