Log files from tasks

Log files save the task processing information so you can understand how the task progressed.

Export errors from log file to Excel

The Task Scheduler log files track task errors. Then you can export the errors from the Task Scheduler .mdb file to an Excel file so that they are easier to discover and understand.

The Excel file generates a separate sheet for each error type. The first column of each sheet lists the error files. The second column lists the corresponding task names.

Log file information common to any task type

• In the Operations table:
  • Document Type Indicates the type of Autodesk Inventor document being migrated.
  • Document Name Specifies the name of the file that is being migrated.
  • Status Logs status of the operation, and reports if it succeeded or failed.
  • File Location Specifies the file location.
• Task Summary Logs the number of files processed for the current task, and the list of files that failed to process, along with their paths. If you see a failed file name listed, you can quickly copy the path and navigate to the file to investigate the cause of the failure.
• Multiple Processes When you run multiple processes, the log file identifies each process uniquely when starting and closing them. For example:

  Started Inventor1 successfully

  Started Inventor2 successfully

• Start Time Logs the system time when the task was started.
• End Time Logs the system time when the task was completed.
• Error messages common to any task type:

Error message	Recommended Action
Failed to open file using Apprentice Server.	Check the input files and verify that Autodesk Inventor can read the format of added files, and run the task again. Before you start the task, open and save the input files in Autodesk Inventor.
File does not exist.	Verify that the input files exist in the destination folder just before the task runs. The contents of the folder can change from the time the task was scheduled to the time the task started to run.
File has unresolved references.	Clear the option Skip files with resolved reference in the Migration or Update task before you run the task. Open the input file in Autodesk Inventor to set the file references correctly, save the document, and then run the task again.
File is read-only.	Remove the read-only property of input files and run the task again.
Project does not exist.	Verify that the activated project exists in the destination.

Log file information unique to task types

Migrate Files, Update Design

Log interpretation information

• Open Time in seconds (column 5).
• Update Difference between the number of comatose (column 5) and sick (column 6) features before and after the update.
• Rebuild Difference between the number of comatose (column 5) and sick (column 6) features before and after the rebuild all.
• Check Difference in the volume from when it was opened up to the point after the update and rebuild are done (column 5).
• Save Time in seconds and the difference in file size (byte) before and after save (column 6).
• Close Time in seconds (column 5).

Operations results table Operation types lead the rows and operation results lead the columns. The header and footer mention the build number before and after migration:

Operation column Specifies the sequence of the various operations Task Scheduler performs to process the task.

• Open Opens the file in a migrated to version in Autodesk Inventor.
• Update Updates the old file to the new Autodesk Inventor version. Regenerates only the geometry that has significant edits in memory. These edits could change the file size.
• Check Checks for the mass properties before and after migration of the file.
• Save Saves the file to the migrated version.
• Close Closes the files after migration.
• Purge Deletes the previous versions of the migrated file from the Old Version folder after the migration task ends.

Failures and Recommended Solutions

Operation That Failed	Cause of Failure	Recommended Action
Open	Active security tools or applications.	Disable the security tools and applications and then rerun the task.
	Other applications are running when you begin the task.	Close any applications which could terminate the Autodesk Inventor Task Scheduler process, and then run the task again.
	Other unfinished operations are running in Autodesk Inventor when you begin the task.	Close Autodesk Inventor, verify that there is no Autodesk Inventor process footprint left in the Task Manager, and then run the task again.
Update	Autodesk Inventor cannot update versions of files older than R6.	Verify that your files are in a version of R6 or later so that they are current enough to be updated.
	Autodesk Inventor failed to update the files.	Rebuild the failed files in Autodesk Inventor to get more information about the failure. In Migration options, check Total Rebuild, and then run the task again.
Check	Mass properties before and after migration does not match.	Open the files in Autodesk Inventor and save them to migrate to the current version or get more information about the error.
Save	Another process is running that can use the files being migrated.	Close all processes that possibly use the added files, and rerun the task.
	Files are set to nonwrite status.	Set write permissions on the files.
	Use Rebuild instead of Update.	In the Migration options dialog box, select the Total Rebuild option, and then run the task again.
Close	Other unfinished operations are running in Autodesk Inventor when you begin the task.	Close Autodesk Inventor, verify that there is no Autodesk Inventor process footprint left in the Task Manager, and then rerun the task.
Purge	Failure.	Purge the Old Versions folder manually after the migration task is finished.

Publish DWF Files, Export Files, Convert IDW to DWG

Operations results table Operation types lead the rows and operation results lead the columns:

Operation column Specifies the sequence of operations that Task Scheduler performs to process the task.

• Get Translator Gets the appropriate translator in Autodesk Inventor based on the file type to prepare for translating the input file to a different output format.
• Open Opens the file in the current version of Autodesk Inventor.
• Export Translates the input file to the output format.
• Close Closes the files after exporting.

Failures and Recommended Solutions

Operation That Failed	Cause of Failure	Recommended Action
Open	Active security tools or applications.	Disable the security tools and applications and then rerun the task.
	Other unfinished operations are running in Autodesk Inventor when you begin the task.	Close Autodesk Inventor, verify that there is no Autodesk Inventor process footprint left in the Task Manager, and then rerun the task.
Export	Failure.	Create an update task to rebuild the files, and then rerun the task. Create an export task to export the files again.
Close	Other unfinished operations are running in Autodesk Inventor when you begin the task.	Close Autodesk Inventor, verify that there is no Autodesk Inventor process footprint left in the Task Manager, and run the task again.

Print Files

Operations results table Operation types lead the rows and operation results lead the columns:

Operation column Specifies the sequence of operations that Task Scheduler performs to publish the file.

• Open Opens the file in the current version of Autodesk Inventor.
• Get Manager Gets the appropriate Autodesk Inventor Print manager API for printing the input documents.
• Set Options Sets the print options and sends them to the selected printer.
• Print Sends the input files to the selected printer and executes the print operation.
• Close Closes the files after printing.

Failures and Recommended Solutions

Operation That Failed	Cause of Failure	Recommended Action
Open	Active security tools or applications.	Disable the security tools and applications and then rerun the task.
	Other unfinished operations are running in Autodesk Inventor when you begin the task.	Close Autodesk Inventor, verify that there is no Autodesk Inventor process footprint left in the Task Manager, and run the task again.
Get Manager	Autodesk Inventor installation problems.	Verify that Autodesk Inventor is installed and running properly, and then run the task again.
Set Options	Autodesk Inventor installation problems.	Verify that Autodesk Inventor is installed and running properly, and then run the task again.
Print	Printer problems can cause a failure.	Check the printer settings and connection.
Close	Other unfinished operations are running in Autodesk Inventor when you begin the task.	Close Autodesk Inventor, verify that there is no Autodesk Inventor process footprint left in the Task Manager, and then rerun the task.

Import Files

Operations results table Operation types lead the rows and operation results lead the columns:

Operation column Specifies the sequence of operations that Task Scheduler performs to process the task.

• Get Translator Gets the appropriate translator in Autodesk Inventor based on the file type to prepare for translating the input file to the output format.
• Open Opens the file in the current version of Autodesk Inventor.
• Import Translates the input file to the output format.
• Close Closes the files after importing.

Failures and Recommended Solutions

Operation That Failed	Cause of Failure	Recommended Action
Get Translator	Translator add-in is not loaded.	Open Autodesk Inventor and verify that you have the corresponding translator add-in loaded.
Open	Active security tools or applications.	Disable the security tools and applications and then run the task again.
	Other unfinished operations are running in Autodesk Inventor when you begin the task.	Close Autodesk Inventor, verify that there is no Autodesk Inventor process footprint left in the Task Manager, and then run the task again.
Import	Failure.	Verify that the files to import are compatible with the current version of Autodesk Inventor.
Close	Other unfinished operations are running in Autodesk Inventor when you begin the task.	Close Autodesk Inventor, verify that there is no Autodesk Inventor process footprint left in the Task Manager, and then run the task again.

Check Out from Vault

Operations results table Operation types lead the rows and operation results lead the columns:

Operation column Specifies the sequence of operations that Task Scheduler performs to publish the file.

• Check Out Checks the selected files out of the vault server to the local machine.

Failures and Recommended Solutions

Failures	Recommended Action
File already checked out. No operation performed	Check in the relevant data set before you run the checkout task. Undo checkout.
Failed at child	Check the resolved reference of the added files.
Vault server error	Check the vault server, and restart it if necessary.
Failed to log in to the vault server.	Verify that the username and password are still valid to log in to the vault server.

Check In to Vault

Operations results table Operation types lead the rows and operation results lead the columns:

Operation column Specifies the sequence of operations that Task Scheduler performs to publish the file.

• Check In Checks the selected files into the vault server.

Status Logs status of the operation, and reports if it succeeded or failed.

Failures and Recommended Solutions

Failures	Recommended Action
File already checked in. No operation performed	Check out the relevant data set before you check it into the vault. Remove the relevant data set from the vault server before you check it into the vault.
Failed at child	Check the resolved reference of the added files.
Inventor 9 files or older cannot be added to the Vault in this version of Task Scheduler. Migrate the files before using Task Scheduler to add the files to the vault.	Update the older versions of files first, and then run the task again.
Vault server error	Check the vault server, and restart it if necessary.
Failed to log in to the vault server.	Verify that the username and password are still valid to log in to the vault server.

Get Latest Version from Vault log

Operations results table Operation types lead the rows and operation results lead the columns:

Operation column Specifies the sequence of operations that Task Scheduler performs to get the latest version of the file.

• Get Latest Version Retrieves a read-only copy of the most recent version of the file that has been checked in.

Failures and Recommended Solutions

Failures	Recommended Action
Vault server error	Check the vault server, and restart it if necessary.
Failed to log in to the vault server.	Verify that the username and password are still valid to log in to the vault server.

Refresh Standard Components

Failures	Recommended Action
Failed: Unknown error.	Part refresh failed without the ability to identify the failure reason.
Failed: The pipe part is owned by Tube&Pipe. The part must be refreshed by Tube&Pipe application.	Use the Tube & Pipe functionality to refresh the part. This message is unlikely, as the refresh command does not work with parts outside of the location of Content Center files.
Failed: Standard is owned by Tube&Pipe. The part must be refreshed by Tube&Pipe application.	Use the Tube & Pipe functionality to refresh the part. This message occurs only if the Tube & Pipe application instances the standard part.
Failed: Unable to check out from Vault.	Check for reasons why you cannot check out the file from the Vault.
Warning: Part family has a “sick” label. Check the part file for correctness.	This warning indicates a sick family. Check the part file and correct the sickness.
Failed: Unable to create part file. Unknown error. Failed: Unable to create part file. You do not have R/W permission to Content Center Files location.   Failed: Unable to create part file. An existing part file with the same name but belonging to another family member has been found in the family folder.   Failed: Unable to create part file. An existing part file with the same name but originated from another family has been found in the family folder.   Failed: Unable to set material.   Failed: Unable to create part file. Part file name exceeds the limit of path length.   Failed: Unable to create part file. Suppress or unsuppress of a feature(s) has failed.   Failed: Unable to create part file. Thread or hole feature has not been found in the part template.   Failed: Unable to create part file. Unable to create thread or hole feature.   Failed: Unable to create part file. Incorrect parameter value.   Failed: New part file has been successfully created, but replace in assembly has failed.	These messages sometimes display when you create a part file. Each one is self explanatory.

Shrinkwrap Assembly

Log file items for shrinkwrap operations are common to all tasks.

Messages display to explain the nature of any failures.

The Task Summary in the log file shows how many files are processed and how many of them failed. A summary of failed files is included.

The last entry is the task end date and time.

Purge Task

Error messages	Recommended action
Purge success.	All unused materials, appearances, and styles in the specified document are purged successfully.
Skipped purge of this document because the document is not checked out.	Check out the file or files, and repeat the purge task.
Failed to purge all unused materials, appearances, and styles.	Migrate the specified files to your current version of Inventor, and repeat the purge task.
Skipped purge task because all materials, appearances, and styles are in use or referenced.	Verifies that the specified document contains no unused or unreferenced materials, appearances, or styles.

Sequential Task

The log detail for sequential tasks is the same as all subtask types. Refer to the log description of each task type.

Custom Task

There is no log file information generated for custom tasks.